Chemical Industry and Engineering Progress ›› 2020, Vol. 39 ›› Issue (7): 2706-2714.DOI: 10.16085/j.issn.1000-6613.2019-1538

• Materials science and technology • Previous Articles     Next Articles

Preparation and application of triazolone molecularlyimprinted nano-spheres

Ziyi LI1(), Zhijun LI1, Lili GU1(), Junli SHI2, Yu’an CHEN1, Yi HAN1, Zhenhao TONG1, Guanghui KONG2   

  1. 1.College of Chemical Engineering, Kunming University of Science and Technology, Kunming 650500, Yunnan, China
    2.Yunnan Tobacco Agricultural Science Research Institute, Yuxi 653100, Yunnan, China
  • Online:2020-07-10 Published:2020-07-05
  • Contact: Lili GU

三唑酮分子印迹纳米球的制备及应用

李子怡1(), 李志君1, 顾丽莉1(), 师君丽2, 陈昱安1, 韩毅1, 佟振浩1, 孔光辉2   

  1. 1.昆明理工大学化学工程学院,云南 昆明 650500
    2.云南省烟草农业科学研究院,云南 玉溪 653100
  • 通讯作者: 顾丽莉
  • 作者简介:李子怡(1993—),女,硕士研究生,研究方向为天然物质的分离。E-mail:liziyi1010@yeah.net
  • 基金资助:
    中国烟草总公司云南省公司科技计划(2017YN11)

Abstract:

A molecularly imprinted solid phase extraction-ultraviolet high performance liquid chromatography-tandem mass spectrometry (MISPE-UPLC-MS/MS) method was developed for the determination of eight triazole fungicide residues in tobacco leaves. Firstly, computer simulation technology was used to evaluate the interaction energies of the complex formed by the triazolone template molecule with five different functional monomers based on the optimize configuration of each monomer respectively. Triazolone and functional monomer complexes were put into five solutions with different polarity to calculate the solvation energy, and the results were verified through experiments to select the best solvent. The self-assembly process and infrared spectrum of TDF-MAA were estimated by computer. The theoretical analysis showed that TDF-MAA self-assembled was an endothermic non-spontaneous process, and the prepolymerization temperature was determined to be 30℃. The results provided key messages to select the suitable monomers and reaction ratios. Then, triazolone molecularly imprinted spheres were prepared by precipitation polymerization. Finally, the molecularly imprinted spheres were pretreated as a solid phase extraction filler and combined with solid phase extraction technology to be applied in the detection of triazole fungicides in tobacco samples, and a new detection method for triazole fungicides was established. The results showed that the prepared molecularly imprinted spheres had uniform particle size distribution and average particle size of 200nm. The nanospheres had good specific adsorption capacity for template molecules and their structural analogs, and the molecular imprinting factor for template was not less than 2.42. The recovery range for the eight triazole fungicides in spiked tobacco samples was 70.14%—105.43%, and the detection limit was 4.82—11.97ng/mL. The relative standard deviation (RSD) was 0.26%—2.27% (n=6). With its unique advantages, the MIPs-SPE-UPLC-MS/MS method provided a multi-residue analytical platform that can meet the requirements for simultaneous detection of trace triazole fungicides in tobacco leaves.

Key words: molecularly imprinted polymers, solid phase extraction, adsorption, molecular simulation, nanoparticles, triazole fungicide

摘要:

建立了烟叶中8种三唑类杀菌剂残留的分子印迹固相萃取-超高效液相色谱-串联质谱(MISPE-UPLC-MS/MS)检测方法。实验中,运用计算机模拟技术筛选最佳功能单体及溶剂,并确定最优聚合反应配比,估算了TDF-MAA的自组装过程与红外光谱图,热力学分析表明TDF-MAA自组装为吸热非自发过程,预聚合反应温度拟定为30℃;采用沉淀聚合法制备了三唑酮分子印迹聚合物纳米颗粒,颗粒粒径分布均匀,平均粒径为200nm;该纳米颗粒对模板分子及其结构类似物具有良好的特异性吸附能力,针对模板分子的分离印迹因子达到2.42;将加标烟叶样品经该纳米颗粒组装的固相萃取柱进行前处理,用UPLC-MS/MS分析前处理液,烟叶中8种三唑类杀菌剂的固相萃取回收率为70.14%~105.43%,检出限为4.82~11.97ng/mL,相对标准偏差(RSD)为0.26%~2.27% (n=6),实现了复杂基质烟叶中多种三唑类杀菌剂的同时检测。

关键词: 分子印迹聚合物, 固相萃取, 吸附, 分子模拟, 纳米粒子, 三唑类杀菌剂

CLC Number: 

京ICP备12046843号-2;京公网安备 11010102001994号
Copyright © Chemical Industry and Engineering Progress, All Rights Reserved.
E-mail: hgjz@cip.com.cn
Powered by Beijing Magtech Co. Ltd