Chemical Industry and Engineering Progress ›› 2019, Vol. 38 ›› Issue (10): 4582-4587.DOI: 10.16085/j.issn.1000-6613.2018-2426

• Industrial catalysis • Previous Articles     Next Articles

Epoxidation of cyclohexene over SiO2 supported cobalt catalyst

Bin ZHANG1,2(),Huan LIU1,Xuelong ZHANG1,Zhen GUO1,Yanghui QIAN1,Lüqiang WANG1,Xiaoyun RUAN1,Bin SHI1()   

  1. 1. State Key Laboratory of Heavy Oil Processing, China University of Petroleum, Qingdao 266580, Shandong, China
    2. Zhejiang TITAN Design & Engineering Co. , Ltd, Hangzhou 310029,Zhejiang,China
  • Received:2018-12-18 Online:2019-10-05 Published:2019-10-05
  • Contact: Bin SHI

SiO2负载钴系催化剂的环己烯环氧化性能

章彬1,2(),刘欢1,张学龙1,郭振1,钱洋慧1,王律强1,阮小云1,石斌1()   

  1. 1. 中国石油大学(华东)重质油国家重点实验室,山东 青岛 266580
    2. 浙江省天正设计工程有限公司,浙江;杭州 310029
  • 通讯作者: 石斌
  • 作者简介:章彬(1992—),男,硕士研究生,研究方向为石油化工。E-mail:1542122433@qq.com

Abstract:

SiO2 (silica gel) supported cobalt oxide catalysts with different loadings were prepared by sedimentation precipitation method. The catalyst was characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), N2 adsorption and desorption. The results showed that the cobalt-based oxide was Co3O4, and the cobalt oxide was uniformly distributed on the SiO2 support. The particle size of most active component was between 2-10nm. The prepared catalyst is then used for the epoxidation of cyclohexene with cyclohexene and molecular oxygen as raw materials, isobutyraldehyde as catalytic auxiliary, and N,N-dimethylformamide (DMF) as reaction solvent . The reaction was carried out in an autoclave and the performance of the Co3O4/SiO2 catalyst was compared with that of the cobalt catalysts supported on two different supports(ZrO2 or Al2O3). The conversion of cyclohexene and the selectivity reached 66.56% and 71.03% under the experimental conditions of 0.20g 3% Co3O4/SiO2, cyclohexene 2g, 50℃ and 4MPa.

Key words: silica, cobalt oxide catalyst, support, oxygen, cyclohexene, epoxidation, selectivity

摘要:

采用沉积沉淀法制备不同负载量的SiO2(硅胶)负载钴氧化物催化剂,采用X射线衍射(XRD)、X射线光电子能谱(XPS)、透射电镜(TEM)、N2吸脱附等手段对催化剂进行表征,结果表明钴系氧化物为Co3O4,并且钴氧化物均匀地负载在SiO2(硅胶)载体上,其活性组分的粒子大小集中分布在2~10nm。将制备的催化剂应用于环己烯环氧化反应,以环己烯、分子氧为原料,异丁醛为催化助剂,N,N-二甲基甲酰胺(DMF)为反应溶剂,在高压釜中进行。同时将SiO2负载钴氧化物催化剂与不同载体上制备的钴系催化剂进行比较,发现催化剂用量0.20g、环己烯2.00g、异丁醛3.50g、反应温度50℃、反应时间5h、氧气压力4MPa时,环己烯的转化率和环氧环己烷的选择性分别可达到66.56%和71.03%。

关键词: 二氧化硅, 钴氧化物催化剂, 载体, 分子氧, 环己烯, 环氧化, 选择性

CLC Number: 

京ICP备12046843号-2;京公网安备 11010102001994号
Copyright © Chemical Industry and Engineering Progress, All Rights Reserved.
E-mail: hgjz@cip.com.cn
Powered by Beijing Magtech Co. Ltd