Analysis structural parameters of hydrocyclone used in ballast water on its performances

doi:10.16085/j.issn.1000-6613.2016.s2.013

Chemical Industry and Engineering Progree ›› 2016, Vol. 35 ›› Issue (S2): 80-86.DOI: 10.16085/j.issn.1000-6613.2016.s2.013

• Chemical processes and equipments • Previous Articles Next Articles

Analysis structural parameters of hydrocyclone used in ballast water on its performances

XU Yanxia, SONG Xingfu, TANG Bo, WANG Jin, YU Jianguo

National Engineering Research Center for Integrated Utilization of Salt Lake Resources, East China University of Science and Technology, Shanghai 200237, China

Received:2016-09-30 Revised:2016-10-12 Online:2016-12-22 Published:2016-12-31

压载水旋流器结构因素对分离性能影响分析

许妍霞, 宋兴福, 唐波, 汪瑾, 于建国

华东理工大学国家盐湖资源综合利用工程技术研究中心, 上海 200237

通讯作者: 宋兴福。E-mail:xfsong@ecust.edu.cn。
作者简介:许妍霞(1984-),女,博士,讲师,研究方向为化学工程。E-mail:xyx@ecust.edu.cn。
基金资助:
国家自然科学基金项目（51504098）。

Abstract

Abstract: With the development of global trade and shipping transportation,the influence of ballast water on the environment is increasing.Hydrocyclone is a kind of important solid-liquid separation equipment for ballast water purification.In this paper,a mathematical model was established to simulate the separation process of ballast water by using computational fluid dynamics,including Reynolds Stress Model for turbulence,Volume of Fluid for multiphase flow and Discrete Phase Model for dispersed phase.Effects of key factors like different column length,spigot diameter and vortex-finder diameter on internal flow field and separation efficiency of hydrocyclone were studied through numerical simulation calculation.The influence of each factor on the separation efficiency was obtained.The length of the cylinder part has little influence on the separation efficiency; the diameter of the spigot has little effect on the pressure drop,but the effect on the flow ratio is relatively great; the increase of the diameter of the vortex finder decreases the energy consumption and increase the flow rate on the vortex finer.However,with the increase of the diameter of the vortex finder,the classified particle size increases.Those results can be as foundation for the high efficiency separation and purification of ballast water by hydrocyclone.

Key words: hydrocyclone, multiphase flow, separation, CFD, optimization

摘要： 随着全球贸易和船舶运输的发展，压载水对环境的影响越来越大。水力旋流分离设备是压载水净化的重要固液分离设备。本文使用计算流体力学，建立数学模型模拟压载水旋流分离过程，模型包括多相湍流雷诺应力模型RSM、处理气液界面的自由表面多相流动模型VOF、处理固体颗粒运动规律的离散相模型DPM。通过数值模拟计算柱段长度、底流口直径和溢流口直径这几个关键因素对旋流器内部流场和分离效率的影响，获得了各个因素对分离效率的影响规律：柱段长度变化对旋流器分离效率的影响不大；底流口直径对旋流器压力降的影响不明显，但对分流比的作用比较大；溢流管直径的增大有助于降低能耗和增大溢流口流量，但随着溢流管直径的增大，分级粒度变大。这些规律为高效旋流分离净化压载水奠定了基础。

关键词: 旋流器, 多相流, 分离, 计算流体力学, 优化

CLC Number:

TD454

XU Yanxia, SONG Xingfu, TANG Bo, WANG Jin, YU Jianguo. Analysis structural parameters of hydrocyclone used in ballast water on its performances[J]. Chemical Industry and Engineering Progree, 2016, 35(S2): 80-86.

许妍霞, 宋兴福, 唐波, 汪瑾, 于建国. 压载水旋流器结构因素对分离性能影响分析[J]. 化工进展, 2016, 35(S2): 80-86.

References

[1] VERNA D E,HARRIS B P.Review of ballast water mana-gement policy and associated implications for alaska[J]. Marine Policy,2016,70:13-21.
[2] 胡春宝.船舶压载水立法现状及发展分析[J].中国水运,2015(10):44-46.
[3] 孙化栋.船舶压载水处理技术进展现状[J].中国水运,2014(14):12-13.
[4] 刘刚,李家淦,王守宝.几种主流船舶压载水处理设备的分析比较[J].世界海运,2014,37(5):49-51.
[5] DAI G Q,CHEN W M,LI J M.Experimental study of solid-liquid two-phase flow in a hydrocyclone[J].Chemical Engineering Journal,1999,74:211-216.
[6] CHUANLIM E W,CHEN Y R,WANG C H. Experimental and computational studies of multiphase hydrodynamics[J]. Chemical Engineering Science,2010,65:6415-6424.
[7] 王军,应胜,陈宁.基于压载水的除沙旋流器设计及实验研究[J].江苏科技大学学报(自然科学版),2014,28(6):552-556.
[8] 丛岩.旋流净化技术在海洋修井平台压载水处理中的应用[J].中国设备工程,2014(10):36-39.
[9] 王军,陈宁,董学明.EEDI指数新规则下压载水除沙旋流器设计[J].船舶工程,2014(6):46-49
[10] MARTINEZ L F,LAVIN A G,MAHAMD M M. Impr-ovements in hydrocyclone design flow lines stabilization[J]. Powder Technology,2007,176:1-8.
[11] 孟梦,包国治,赵宇宇.压载水旋流预处理单元的优化设计与数值模拟[J].舰船科学技术,2016,38(3):73-78.
[12] 吕鸿冠,黄技,严谨.基于DPM的防泥沙压载水舱的数值模拟[J].中国水运,2015,15(10):137-141.
[13] 许妍霞,宋兴福,吴亚洲.溢流口结构对水力旋流器性能影响的模拟分析[J].华东理工大学学报,2012(3):271-276.
[14] Xu Y X,SONG X F,SUN Z,et al,Simulation analysis of multiphase flow and performance of hydrocyclones at different atmospheric pressures[J]. Industrial & Engineering Chemistry Research,2012,51:443-453.
[15] GOMEZ J A D.Modeling of 75 and 250 mm Hydrocyclones and exploration of novel designs using computational fluid dynamics[D]. Salt Lake City:The University of Utah,2006.
[16] HSIEH K T.Phenomenological model of the hydrocyclone[D]. Salt Lake City:The University of Utah,1988.

Analysis structural parameters of hydrocyclone used in ballast water on its performances

压载水旋流器结构因素对分离性能影响分析

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments

[1]	CUI Shoucheng, XU Hongbo, PENG Nan. Simulation analysis of two MOFs materials for O₂/He adsorption separation [J]. Chemical Industry and Engineering Progress, 2023, 42(S1): 382-390.
[2]	WANG Zhengkun, LI Sifang. Green synthesis of gemini surfactant decyne diol [J]. Chemical Industry and Engineering Progress, 2023, 42(S1): 400-410.
[3]	LI Shilin, HU Jingze, WANG Yilin, WANG Qingji, SHAO Lei. Research progress in separation and extraction of high value components by electrodialysis [J]. Chemical Industry and Engineering Progress, 2023, 42(S1): 420-429.
[4]	GUO Qiang, ZHAO Wenkai, XIAO Yonghou. Numerical simulation of enhancing fluid perturbation to improve separation of dimethyl sulfide/nitrogen via pressure swing adsorption [J]. Chemical Industry and Engineering Progress, 2023, 42(S1): 64-72.
[5]	LI Mengyuan, GUO Fan, LI Qunsheng. Simulation and optimization of the third and fourth distillation columns in the recovery section of polyvinyl alcohol production [J]. Chemical Industry and Engineering Progress, 2023, 42(S1): 113-123.
[6]	ZHANG Ruijie, LIU Zhilin, WANG Junwen, ZHANG Wei, HAN Deqiu, LI Ting, ZOU Xiong. On-line dynamic simulation and optimization of water-cooled cascade refrigeration system [J]. Chemical Industry and Engineering Progress, 2023, 42(S1): 124-132.
[7]	HUANG Yiping, LI Ting, ZHENG Longyun, QI Ao, CHEN Zhenglin, SHI Tianhao, ZHANG Xinyu, GUO Kai, HU Meng, NI Zeyu, LIU Hui, XIA Miao, ZHU Kai, LIU Chunjiang. Hydrodynamics and mass transfer characteristics of a three-stage internal loop airlift reactor [J]. Chemical Industry and Engineering Progress, 2023, 42(S1): 175-188.
[8]	WANG Fu'an. Consumption and emission reduction of the reactor of 300kt/a propylene oxide process [J]. Chemical Industry and Engineering Progress, 2023, 42(S1): 213-218.
[9]	HE Meijin. Application and development trend of molecular management in separation technology in petrochemical field [J]. Chemical Industry and Engineering Progress, 2023, 42(S1): 260-266.
[10]	LI Chunli, HAN Xiaoguang, LIU Jiapeng, WANG Yatao, WANG Chenxi, WANG Honghai, PENG Sheng. Research progress of liquid distributors in packed columns [J]. Chemical Industry and Engineering Progress, 2023, 42(9): 4479-4495.
[11]	LUO Cheng, FAN Xiaoyong, ZHU Yonghong, TIAN Feng, CUI Louwei, DU Chongpeng, WANG Feili, LI Dong, ZHENG Hua’an. CFD simulation of liquid distribution in different distributors in medium-low temperature coal tar hydrogenation reactor [J]. Chemical Industry and Engineering Progress, 2023, 42(9): 4538-4549.
[12]	LIAO Zhixin, LUO Tao, WANG Hong, KONG Jiajun, SHEN Haiping, GUAN Cuishi, WANG Cuihong, SHE Yucheng. Application and progress of solvent deasphalting technology [J]. Chemical Industry and Engineering Progress, 2023, 42(9): 4573-4586.
[13]	PAN Yichang, ZHOU Rongfei, XING Weihong. Advanced microporous membranes for efficient separation of same-carbon-number hydrocarbon mixtures: State-of-the-art and challenges [J]. Chemical Industry and Engineering Progress, 2023, 42(8): 3926-3942.
[14]	LI Haidong, YANG Yuankun, GUO Shushu, WANG Benjin, YUE Tingting, FU Kaibin, WANG Zhe, HE Shouqin, YAO Jun, CHEN Shu. Effect of carbonization and calcination temperature on As(Ⅲ) removal performance of plant-based Fe-C microelectrolytic materials [J]. Chemical Industry and Engineering Progress, 2023, 42(7): 3652-3663.
[15]	LOU Baohui, WU Xianhao, ZHANG Chi, CHEN Zhen, FENG Xiangdong. Advances in nanofluid for CO₂ absorption and separation [J]. Chemical Industry and Engineering Progress, 2023, 42(7): 3802-3815.