330MW供热机组低压缸近零出力热力性能分析

doi:10.16085/j.issn.1000-6613.2019-1581

摘要/Abstract

摘要：

阐述了汽轮机低压缸切缸供热系统工作机理，结合某330MW空冷供热机组，应用Ebsilon软件搭建切缸供热改造前后机组变工况计算模型，基于热力学定律，对比分析改造前后机组能耗分布和供热能力。绘制了纯凝运行、抽汽供热和切缸供热工况能流图，获得机组在不同供热方式下能量流动方向和各部分损失变化。探讨影响机组调峰范围的因素，利用工况图分析低压缸近零出力改造后电热负荷特性及其调峰能力的变化。并结合电力辅助服务市场运营规则进行了调峰补偿收益核算。结果表明：较抽凝运行工况，案例机组完成低压缸近零出力改造后，最大供热能力增加37.1%；额定供热工况电负荷调节能力提高34.8%；发电标准煤耗率降低54.5g/(kW·h), 调峰能力增加的同时热经济性提高。本文从理论上，对低压缸近零出力改造技术的应用提供了定量依据和工程适用范围，为热电联产机组灵活性改造技术应用提供理论支撑。

关键词: 热电联产, 低压缸近零出力, 深度调峰, 热经济性, 模型, 优化

Abstract:

The working mechanism of the steam turbine low-pressure cylinder cutting cylinder heating system is described. Combined with a 330MW air-cooled heating unit, Ebsilon software is used to build the calculation model of the unit's variable operating conditions before and after the cutting cylinder heating transformation. Based on the laws of thermodynamics, the energy consumption distribution and heating capacity of the unit before and after the transformation are compared and analyzed. The energy flow diagram of pure condensing operation, extraction heating and cutting cylinder heating is drawn to obtain the change of energy flow direction and loss of each part of the unit under different heating modes. The factors influencing the range of peak regulation of the unit are discussed and the characteristics of electric load and the change of peak regulation capacity of the low-pressure cylinder are analyzed by using the working diagram. Combined with the operation rules of power auxiliary service market, the calculation of peak compensation income is carried out. The results show that: compared with the pumping and condensing operation condition, the maximum heating capacity of the case unit is increased by 37.1% after completing the transformation of low-pressure cylinder near zero output; the adjustment capacity of electrical load in rated heating condition is increased by 34.8%; the standard coal consumption rate of power generation is reduced by 54.5g/kW·h, and the peak regulation capacity is increased while the thermal economy is improved. In theory, this paper provides quantitative basis and engineering scope for the application of low-pressure cylinder near zero output transformation technology, and provides theoretical support for the application of cogeneration unit flexibility transformation technology.

Key words: cogeneration of heat and power, low pressure cylinder near zero output, depth peak regulation, thermal efficiency, model, optimization, exergy

中图分类号:

TM621

戈志华, 张倩, 熊念, 张尤俊. 330MW供热机组低压缸近零出力热力性能分析[J]. 化工进展, 2020, 39(9): 3650-3657.

Zhihua GE, Qian ZHANG, Nian XIONG, Youjun ZHANG. Thermal performance analysis of 330MW heating unit with low pressure cylinder near zero output[J]. Chemical Industry and Engineering Progress, 2020, 39(9): 3650-3657.

参考文献

1	国家能源局. 2018年度全国可再生能源电力发展监测评价报告[R/OL]. 国能发新能[2019] 53号. .
1	National Energy Administration. 2018 National renewable energy power development monitoring and evaluation report[R/OL]. National energy development new energy [2019] no. 53..
2	国家能源局正式启动提升火电灵活性改造示范试点工作[J]. 中国能源, 2016, 38(7): 5.
2	The National Energy Administration officially launched the demonstration and pilot work to improve thermal power flexibility [J]. China Energy, 2016, 38(7): 5.
3	康玉洁. 燃气-蒸汽联合循环发电系统的现状和展望[J]. 电气时代, 2013(6): 60-61, 64.
3	KANG Yujie. Current situation and prospect of gas-steam combined cycle power generation system [J]. Electric Age, 2013(6): 60-61, 64.
4	ZHAO Shifei, GE Zhihua, SUN Jian, et al. Comparative study of flexibility enhancement technologies for the coal-fired combined heat and power plant[J]. Energy Conversion and Management, 2019, 184: 15-23.
5	吕泉, 陈天佑, 王海霞, 等. 配置储热后热电机组调峰能力分析[J]. 电力系统自动化, 2014, 38(11): 34-41.
5	Quan LYU, CHEN Tianyou, WANG Haixia, et al. Analysis of peak regulation capacity of thermoelectric units after heat storage[J]. Power System Automation, 2014, 38(11): 34-41.
6	黄嘉驷, 刘永林, 付亦葳, 等. 200 MW机组蒸汽旁路热电解耦能力评估[J]. 热力发电, 2018, 47(10): 90-95.
6	HUANG Jiasi, LIU Yonglin, FU Yiwei, et al. Steam bypass thermoelectric decoupling capability evaluation of 200 MW units[J]. Thermal Power Generation, 2008, 47(10): 90-95.
7	戈志华, 孙诗梦, 万燕, 等. 大型汽轮机组高背压供热改造适用性分析[J]. 中国电机工程学报. 2017, 37(11): 3216-3222.
7	GE Zhihua, SUN Shimeng, WAN Yan, et al. Applicability analysis of high back pressure heating transformation for large steam turbine units [J]. Chinese Journal of Electrical Engineering. 2017, 37(11): 3216-3222.
8	ZHAO Shifei, DU Xiaoze, GE Zhihua, et al. Cascade utilization of flue gas waste heat in combined heat and power system with high back-pressure (CHP-HBP) [J]. Energy Procedia, 2016, 104: 27-31.
9	孙佳南, 高佳颖. 高效、供热最大化及运行灵活的NCB式汽轮机[J]. 电站系统工程, 2016, 32(3): 51-53.
9	SUN Jiannan, GAO Jiayin. NCB steam turbine with high efficiency, maximum heating and flexible operation[J]. Power Station System Engineering, 2016, 32(3): 51-53.
10	戈志华, 张尤俊, 熊念, 等. 高背压供热汽轮机低压部分性能优化[J]. 化工进展, 2019, 38(12): 5264-5270.
10	GE Zhihua, ZHANG Yujun, XIONG Nian, et al. Optimization of low-pressure flow part of high back-pressure heating steam turbine[J]. Chemical Industry and Engineering Progress, 2019, 38(12): 5264-5270.
11	刘刚.火电机组灵活性改造技术路线研究[J].电站系统工程, 2018, 34(1): 12-15.
11	LIU Gang. Research on technical route of flexible transformation of thermal power units[J]. Power Station System Engineering, 2018, 34(1): 12-15.
12	叶向东, 赵贺, 罗发青, 等. 一种切除低压缸进汽的供热系统：CN206830242U[P]. 2018-01-02.
12	YE Xiangdong, ZHAO He, LUO Faqing, et al. A heating system for excising steam from low-pressure cylinder: CN206830242U[P]. 2018-01-02.
13	杨荣祖, 宋文希, 鲍军, 等. 一种基于给水泵汽轮机排汽的低压缸长叶片冷却系统: CN207245769U[P].2018-04-17.
13	YANG Rongzu, SONG Wenxi, BAO Jun, et al. A low-pressure cylinder long blade cooling system based on feed pump steam turbine exhaust: CN207245769U[P]. 2018-04-17.
14	谢天, 孙永春, 付青山, 等. 200MW机组热电解耦方案研究[J]. 节能技术, 2018, 36(6): 566-569.
14	XIE Tian, SUN Yongchun, FU Qingshan, et al. Study on thermoelectric decoupling scheme for 200MW units[J]. Energy Conservation Technology, 2008, 36(6): 566-569.
15	李树明, 刘青松, 朱小东, 等. 350MW超临界热电联产机组灵活性改造分析[J]. 发电技术, 2018, 39(5): 449-454.
15	LI Shuming, LIU Qingsong, ZHU Xiaodong, et al. Analysis on the flexibility transformation of 350MW supercritical cogeneration unit[J]. Power Generation Technology, 2008, 39(5): 449-454.
16	姚居鹏. 135MV机组低压缸切缸运行方式机组振动的分析调整[J].技术与市场, 2020, 27(4): 79-80.
16	YAO Jupeng.Vibration analysis and adjustment of 135MW low pressure cylinder cutting operation mode unit[J].Technology and Market, 2020, 27(4): 19-20.
17	万燕, 孙诗梦, 戈志华, 等. 大型热电联产机组高背压供热改造全工况热经济分析[J]. 电力建设, 2016, 37(4): 131-137.
17	WAN Yan, SUN Shimeng, GE Zhihua, et al. Thermal economic analysis of high back pressure heating reform in full working condition of large cogeneration units[J]. Power Construction, 2016, 37(4):131-137.
18	王琪，刘亚南，刘网扣.某600MW机组汽轮机低压缸切除改造[J].发电设备，2019，33(5):366-370.
18	WANG Qi, LIU Yanan, LIU Wangkou. Research and modification of low pressure cylinder of steam turbine for a 600MW unit[J]. Power Generation Equipment, 2019, 33(5): 366-370.
19	华志刚, 周乃康, 袁建丽, 等. 燃煤供热机组灵活性提升技术路线研究[J]. 电站系统工程, 2018, 34(6): 9-12.
19	HUA Zhigang, ZHOU Naikang, YUAN Jianli, et al. Study on technical route of flexibility improvement of coal-fired heating units [J]. Power Station System Engineering, 2008, 34(6): 9-12.

[1]	王正坤, 黎四芳. 双子表面活性剂癸炔二醇的绿色合成[J]. 化工进展, 2023, 42(S1): 400-410.
[2]	孙玉玉, 蔡鑫磊, 汤吉海, 黄晶晶, 黄益平, 刘杰. 反应精馏合成甲基丙烯酸甲酯工艺优化及节能[J]. 化工进展, 2023, 42(S1): 56-63.
[3]	李梦圆, 郭凡, 李群生. 聚乙烯醇生产中回收工段第三、第四精馏塔的模拟与优化[J]. 化工进展, 2023, 42(S1): 113-123.
[4]	张瑞杰, 刘志林, 王俊文, 张玮, 韩德求, 李婷, 邹雄. 水冷式复叠制冷系统的在线动态模拟与优化[J]. 化工进展, 2023, 42(S1): 124-132.
[5]	徐晨阳, 都健, 张磊. 基于图神经网络的化学反应优劣评价[J]. 化工进展, 2023, 42(S1): 205-212.
[6]	王福安. 300kt/a环氧丙烷工艺反应器降耗减排分析[J]. 化工进展, 2023, 42(S1): 213-218.
[7]	陈匡胤, 李蕊兰, 童杨, 沈建华. 质子交换膜燃料电池气体扩散层结构与设计研究进展[J]. 化工进展, 2023, 42(S1): 246-259.
[8]	李春利, 韩晓光, 刘加朋, 王亚涛, 王晨希, 王洪海, 彭胜. 填料塔液体分布器的研究进展[J]. 化工进展, 2023, 42(9): 4479-4495.
[9]	陈林, 徐培渊, 张晓慧, 陈杰, 徐振军, 陈嘉祥, 密晓光, 冯永昌, 梅德清. 液化天然气绕管式换热器壳侧混合工质流动及传热特性[J]. 化工进展, 2023, 42(9): 4496-4503.
[10]	刘炫麟, 王驿凯, 戴苏洲, 殷勇高. 热泵中氨基甲酸铵分解反应特性及反应器结构优化[J]. 化工进展, 2023, 42(9): 4522-4530.
[11]	张帆, 陶少辉, 陈玉石, 项曙光. 基于改进恒热传输模型的精馏模拟初始化[J]. 化工进展, 2023, 42(9): 4550-4558.
[12]	王晨, 白浩良, 康雪. 大功率UV-LED散热与纳米TiO₂光催化酸性红26耦合系统性能[J]. 化工进展, 2023, 42(9): 4905-4916.
[13]	张振, 李丹, 陈辰, 吴菁岚, 应汉杰, 乔浩. 吸附树脂对唾液酸的分离纯化[J]. 化工进展, 2023, 42(8): 4153-4158.
[14]	张智琛, 朱云峰, 成卫戍, 马守涛, 姜杰, 孙冰, 周子辰, 徐伟. 高压聚乙烯失控分解研究进展：反应机理、引发体系与模型[J]. 化工进展, 2023, 42(8): 3979-3989.
[15]	李海东, 杨远坤, 郭姝姝, 汪本金, 岳婷婷, 傅开彬, 王哲, 何守琴, 姚俊, 谌书. 炭化与焙烧温度对植物基铁碳微电解材料去除As(Ⅲ)性能的影响[J]. 化工进展, 2023, 42(7): 3652-3663.