化工进展 ›› 2018, Vol. 37 ›› Issue (09): 3562-3567.DOI: 10.16085/j.issn.1000-6613.2017-1881

• 材料科学与技术 • 上一篇    下一篇

EVA-g-MAH的制备及在聚合物共混相容中的应用

金世龙1,2, 崔崑2, 毛国梁1, 历娜1, 吴韦1, 马志2   

  1. 1 东北石油大学化学化工学院, 石油与天然气化工省重点实验室, 黑龙江 大庆 163318;
    2 中国科学院上海有机化学研究所, 中国科学院有机功能分子合成与组装化学重点实验室, 上海 200032
  • 收稿日期:2017-09-07 修回日期:2018-01-10 出版日期:2018-09-05 发布日期:2018-09-05
  • 通讯作者: 崔崑,博士,高级工程师,主要从事功能高分子材料、纳米复合材料研究;毛国梁,博士,教授,主要研究方向为聚烯烃催化剂及油田化学剂。
  • 作者简介:金世龙(1989-),男,硕士研究生。E-mail:fumupingan6@163.com。
  • 基金资助:
    国家自然科学基金(51534004,U1362110,21374130)及上海市自然科学基金(14ZR1448700)项目。

The preparation of EVA-g-MAH and its application in the compatible blending of polymers

JIN Shilong1,2, CUI Kun2, MAO Guoliang1, LI Na1, WU Wei1, MA Zhi2   

  1. 1 Provincial Key Laboratory of Oil & Gas Chemical Technology, College of Chemistry & Chemical Engineering, Northeastern Petroleum University, Daqing 163318, Heilongjiang, China;
    2 Key Laboratory of Synthesis and Self-assembly Chemistry for Organic Functional Molecules, Shanghai Institute of Organic Chemistry, Chinese Academy of Sciences, Shanghai 200032, China
  • Received:2017-09-07 Revised:2018-01-10 Online:2018-09-05 Published:2018-09-05

摘要: 采用溶液接枝法合成得到乙烯-乙酸乙烯酯接枝马来酸酐聚合物(EVA-g-MAH),利用核磁共振仪和红外光谱仪对产物进行分子链结构分析,结果表明:马来酸酐已成功接枝在EVA主链与酯基相连的叔碳原子上。通过调节马来酸酐(MAH)与EVA中乙酸乙烯酯(VA)单元的投料比,得到了不同接枝率(摩尔分数4.87%~12.3%)的产物。以EVA-g-MAH接枝共聚物为相容剂,通过聚合物加工制备了高密度聚乙烯(HDPE)/聚碳酸酯(PC)/EVA-g-MAH共混物,利用SEM对样品脆断面表面形貌进行对比观察,验证了EVA-g-MAH是HDPE/PC共混聚合物的良好相容剂。最后,研究了EVA-g-MAH对尼龙(PA6)/EVA共混物抗冲击强度的影响,当EVA-g-MAH加入质量分数为6%时对共混合金冲击强度提高最大。

关键词: 乙烯-乙酸乙烯酯接枝马来酸酐, 溶液接枝法, 聚合物, 核磁共振, 相容剂, 聚合物加工

Abstract: EVA-g-MAH polymer was synthesized by solution grafting method. The molecular chain structure of EVA-g-MAH was analyzed by NMR and IR. The results showed that maletic anhydride has been successfully grafted in the main chain of the EVA and the ester group has been connected to the tertiary carbon atoms. By adjusting the feed ratio of maleic anhydride (MAH) to vinyl acetate (VA) units in EVA, we obtained products with different grafting ratios (4.87%-12.3%). Subsequently, high density polyethylene (HDPE)/polycarbonate (PC)/EVA-g-MAH blends were prepared by polymer processing with EVA-g-MAH graft copolymer as the compatibilizer. SEM results of the cross-section confirm that EVA-g-MAH is a good compatibilizer for HDPE/PC blends. Finallly, the effect of EVA-g-MAH on the impact strength of nylon (PA6)/EVA blends was studied. When the adding amount of EVA-g-MAH was 6%, the impact strength of blends was highest.

Key words: ethyiene-vinyl acetate copolymer grafted maleic anhydride, solutin grafting method, polymers, nuclear magnetic resonance, compatibilizer, polymer processing

中图分类号: 

京ICP备12046843号-2;京公网安备 11010102001994号
版权所有 © 《化工进展》编辑部
地址:北京市东城区青年湖南街13号 邮编:100011
电子信箱:hgjz@cip.com.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn