化工进展 ›› 2018, Vol. 37 ›› Issue (08): 2880-2891.DOI: 10.16085/j.issn.1000-6613.2017-2168

• 化工过程与装备 • 上一篇    下一篇

脉动热管可视化实验研究进展

孙潇1, 韩东阳1, 焦波2, 甘智华1,3,4   

  1. 1 浙江大学制冷与低温研究所, 浙江 杭州 310027;
    2 哈尔滨理工大学荣成校区机械工程系, 山东 荣成 264300;
    3 浙江省制冷与低温技术重点实验室, 浙江 杭州 310027;
    4 国家冷冻冷藏设备质量检验中心(河南), 河南 商丘 476800
  • 收稿日期:2017-10-24 修回日期:2017-12-14 出版日期:2018-08-05 发布日期:2018-08-05
  • 通讯作者: 甘智华,教授,博士生导师,研究方向为液氦温区回热制冷机理、液氦温区J-T节流机理等。
  • 作者简介:孙潇(1993-),女,博士研究生,研究方向为低温脉动热管。E-mail:sunxiaos@zju.edu.cn。
  • 基金资助:
    国家自然科学基金(51776180,51506040)及黑龙江省普通本科高等学校青年创新人才培养计划(UNPYSCT-2015050)项目。

Research progress on visualization of pulsating heat pipes

SUN Xiao1, HAN Dongyang1, JIAO Bo2, GAN Zhihua1,3,4   

  1. 1 Institute of Refrigeration and Cryogenics, Zhejiang University, Hangzhou 310027, Zhejiang, China;
    2 Department of Mechanical Engineering, Rongcheng Campus, Harbin University of Science and Technology, Rongcheng 264300, Shandong, China;
    3 Key Laboratory of Refrigeration and Cryogenic Technology of Zhejiang Province, Hangzhou 310027, Zhejiang, China;
    4 National Quality Inspection Center of Refrigeration Equipment(Henan), Shangqiu 476800, Henan, China
  • Received:2017-10-24 Revised:2017-12-14 Online:2018-08-05 Published:2018-08-05

摘要: 脉动热管是一种结构简单、可用于微小空间、高热流密度条件下的传热元件。其优良的传热特性源于内部工质的蒸发、冷凝相变以及两相流动等热-水动力学特性。可视化实验是研究工质流动特性的常用方法,对于理解脉动热管的传热机理非常重要。本文介绍了5种可视化技术手段,简述了近二十年来脉动热管可视化实验观察到的气液相变和多种流型,分析了流型的影响因素,并总结了流动特性和传热性能之间的对应关系。指出目前可视化实验观察到的结果可以定性地解释一些传热现象,却难以定量地揭示脉动热管的传热规律。未来可以将可视化实验中测得的气液塞运动速度、液膜厚度和相分布等信息利用起来,考虑管壁材质的影响,建立更准确的气液两相流模型,用来设计、评估和预测脉动热管的性能。

关键词: 脉动热管, 可视化, 气液两相流, 相变, 传热

Abstract: Pulsating heat pipe(PHP)is a heat transfer device with simple structure capable of transferring heat effectively in comparatively small space. Visualization experiment is a common method to study flow characteristics of working fluid, which is very important to understand thermo-hydrodynamics of PHP. Previous studies have shown that bubble flow, slug flow, annular flow or semi-annular flow are common flow patterns. Phenomena such as nucleation boiling, coalescence of bubbles, formation of vapor plug and liquid slug were observed in the closed loop PHP. In this paper, five visualization techniques were introduced. Gas-liquid phase transition and flow patterns observed in the visualization experiments of PHPs in recent two decades were briefly introduced. The influencing factors of flow pattern were analyzed, and the correspondence between flow characteristics and heat transfer performance were summarized. At last, future developments were suggested.

Key words: pulsating heat pipe, visualization, gas-liquid flow, phase change, heat transfer

中图分类号: 

京ICP备12046843号-2;京公网安备 11010102001994号
版权所有 © 《化工进展》编辑部
地址:北京市东城区青年湖南街13号 邮编:100011
电子信箱:hgjz@cip.com.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn