[1] WHELAN B P,KEMPERS R,ROBINSON A J. A liquid-based system for CPU cooling implementing a jet array impingement waterblock and a tube array remote heat exchanger[J]. Applied Thermal Engineering,2012,39(3):86-94.
[2] SAUCIUC I,PRASHER R,CHANG J Y,et al. Thermal performance and key challenges for future CPU cooling technologies[C]//Advances in Electronic Packaging 2005,Pts A-C. 2005:353-364.
[3] 郝俊娇,潘日,周刚,等. 高热流密度电子元件中热管散热技术的进展[J]. 化工进展,2015,34(5):1220-1224. HAO J J,PAN R,ZHOU G,et al. Development of heat pipe cooling technology in high heat flux electronic components[J]. Chemical Industry and Engineering Progress,2015,34(5):1220-1224.
[4] SHARMA C S,TIWARI M K,ZIMMERMANN S,et al. Energy efficient hotspot-targeted embedded liquid cooling of electronics[J]. Applied Energy,2015,138:414-422.
[5] 牛永红,刘宗攀,庞赟佶. CPU芯片水冷散热器的数值模拟与分析[J]. 化工进展,2010,29(s1):653-655. NIU Y H,LIU Z P,PANG Y J. Numerical simulation and analysis of CPU chip water-cooling radiator[J]. Chemical Industry and Engineering Progress,2010,29(s1):635-655.
[6] 夏国栋,刘青,王敏,等. 岐管式微通道冷却热沉的三维数值优化[J]. 工程热物理学报,2006,27(1):145-147. XIA G D,LIU Q,WANG M,et al. Three-dimensional numerical optimization of the manifold microchannel heat sink[J]. Journal of Engineering Thermophysics,2006,27(1):145-147.
[7] 崔卓,诸凯,王雅博,等. 高热流密度器件水冷散热器结构性能的实验研究[J]. 化工进展,2016,35(5):1338-1343. CUI Z,ZHU K,WANG Y B,et al. Experimental study on water-cooled radiator structure performance of high heat flux device[J]. Chemical Industry and Engineering Progress,2016,35(5):1338-1343.
[8] LIU S,YANG J,GAN Z,et al. Structural optimization of a microjet based cooling system for high power LEDs[J]. International Journal of Thermal Sciences,2008,47(8):1086-1095.
[9] ZHAO J,HUANG S,GONG L,et al. Numerical study and optimizing on micro square pin-fin heat sink for electronic cooling[J]. Applied Thermal Engineering,2016,93:1347-1359.
[10] NDAO S,PELES Y,JENSEN M K. Effects of pin fin shape and configuration on the single-phase heat transfer characteristics of jet impingement on micro pin fins[J]. International Journal of Heat and Mass Transfer,2014,70:856-863.
[11] CHEIN R,HUANG G. Thermoelectric cooler application in electronic cooling[J]. Applied Thermal Engineering,2004,24(14/15):2207-2217.
[12] Moffat R J. Describing the uncertainties in experimental results[J]. Experimental Thermal and Fluid Science,1988,1(1):3-17.
[13] 代宝民. CO2/低GWP工质二元混合物微小通道内流动换热机理的研究[D]. 天津:天津大学,2015. DAI B M. Research on heat transfer mechanism of CO2/low-GWP refrigerant binary mixtures flowing in micro- and mini-channels[D]. Tianjin:Tianjin University,2015.
[14] 周明正,夏国栋,柴磊,等. 流体横掠水滴形微针肋热沉流动和传热特性[J]. 航空动力学报,2012,27(12):2681-2686. ZHOU M Z,XIA G D,CAI L,et al. Flow and heat transfer characteristics of drop-shaped micro pin-fin heat sinks with cross flow[J]. Journal of Aerospace Power,2012,27(12): 2681-2686.
[15] SINGH R,AKBARZADEH A,DIXON C,et al. Miniature loop heat pipe with flat evaporator for cooling computer CPU[J]. IEEE Transactions on Components and Packaging Technologies,2007,30(1):42-49. |