化工进展

• 精细化工 • 上一篇    下一篇

水溶液中共聚合成MPEGAA-AA-AMPS聚羧酸高效减水剂 及其性能

陈宝璠1,2   

  1. 1黎明职业大学土木建筑工程学院,福建 泉州 362000;2黎明职业大学实用化工材料福建省高等学校应用技术工程中心,福建 泉州 362000
  • 出版日期:2013-04-05 发布日期:2013-04-05

Synthesis and performance of superplasticizer of MPEGAA-AA-AMPS by free radical copolymerization in aqueous solution

CHEN Baofan1,2   

  1. 1School of Civil Engineering,Liming Vocational University,Quanzhou 362000,Fujian,China;2 Applied Technology Engineering Center of Fujian Provincial Higher Education for Practical Chemical Material,Liming Vocational University,Quanzhou 362000,Fujian,China
  • Online:2013-04-05 Published:2013-04-05

摘要: 以自制的活性大单体聚乙二醇单甲醚丙烯酸酯(MPEGAA)、丙烯酸(AA)和2-丙烯酰胺基-2-甲基丙磺酸(AMPS)为原料,在水溶液中共聚合成了MPEGAA-AA-AMPS高效减水剂。重点考察了单体的摩尔比、引发剂(APS)用量、反应温度和反应时间等合成条件对MPEGAA-AA-AMPS高效减水剂的影响。结果表明:最佳的高效减水剂的合成条件是:n(MPEGAA)∶n(AA)∶n(AMPS)=1∶4.3∶1.10,引发剂APS用量为单体总质量的5%,聚合温度和反应时间分别为80 ℃和5 h。在该条件下合成的MPEGAA-AA-AMPS高效减水剂,其分散性和保塑性理想,减水增强效果明显。

关键词: 高效减水剂, 聚合, 合成, 性能

Abstract: Superplasticizer of MPEGAA-AA-AMPS was synthesized with self-made active macromonomer methoxyl (polyethyleneglycol) acrylate (MPEGAA),acrylic acid (AA),2-acrylamido-2 methyl-propane sulfonic acid (AMPS) by free radical copolymerization in agueous solution. The influences of molar ratio of monomer,dosage of initiator (APS),reaction temperature and reaction time on the copolymerization were investigated. The results showed that the optimum reaction condition was as follows:molar ratio of MPEGAA to AA to AMPS 1∶4.3∶1.10,dosage of ammonium persulfate 5% of total monomers by mass,reaction temperature 80 ℃,reaction time 5 h. The superplasticizer MPEGAA-AA-AMPS prepared under this condition had good fluidity and plasticization,with remarkable effects of water reduction and enhancement.

Key words: superplasticizer, polymerization, synthesis, performance

京ICP备12046843号-2;京公网安备 11010102001994号
版权所有 © 《化工进展》编辑部
地址:北京市东城区青年湖南街13号 邮编:100011
电子信箱:hgjz@cip.com.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn