木塑复合材料热解特性

化工进展 ›› 2015, Vol. 34 ›› Issue (s1): 156-161.

木塑复合材料热解特性

孙剑平^1,2, 张志军², 王清文², 隋淑娟², 林晓娜²

1. 沈阳建筑大学市政与环境工程学院, 辽宁沈阳 110168;
2. 东北林业大学生物质材料科学与技术教育部重点实验室, 黑龙江哈尔滨 150040

出版日期:2015-09-20 发布日期:2015-10-20
通讯作者: 王清文,教授。E-mail qwwang@nefu.edu.cn。
作者简介:孙剑平(1977—),男,博士,讲师。
基金资助:
国家科技支撑计划(2012BAD32B04)及辽宁省教育厅科研项目(L2012209)。

Pyrolysis characteristics of wood-plastic composites

SUN Jianping^1,2, ZHANG Zhijun², WANG Qingwen², SUI Shujuan², LIN Xiaona²

1. School of Municipal and Environmental Engineering, Shenyang Jianzhu University, Shenyang 110168, Liaoning, China;
2. Key Laboratory of Bio-Based Material Science and Technology of Ministry of Education, Northeast Forestry University, Harbin 150040, Heilongjiang, China

Online:2015-09-20 Published:2015-10-20

摘要/Abstract

摘要： 通过热重分析(TGA)和裂解/气质联用(Py-GC/MS)对杨木/高密度聚乙烯(HDPE)木塑复合材料(WPC)进行热解,考察了木粉和聚烯烃塑料热解过程中的相互作用。结果表明:生物质和塑料热解过程中存在明显的协同作用,杨木在较低的温度下即开始发生热解,其提供的自由基参与了聚烯烃热解反应,产生了更多的轻质烃类产物。而聚烯烃分解产生的碳氢化合物向生物质分解产生的自由基提供氢,促进挥发性物质生成,部分抑制了活性自由基进一步聚合结焦,得到了更多的挥发性产物和减少了固体残炭。

关键词: 木塑复合材料, 生物质, 塑料, 热重分析, 热解

Abstract: Thermo-gravimetric analysis (TGA) and pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) were employed to investigate the pyrolytic behavior and primary pyrolysis product distribution of the pyrolysis of wood-plastic composites (WPC).The mutual effects of poplar wood and high-density polyethylene were detailed discussed during pyrolysis.The results showed that a significant synergistic effect between plastic and biomass was present in the pyrolysis process of WPC.The Py-GC/MS indicated that due to the lower temperature of biomass component decomposition compared with polyolefins, free radicals are formed from biomass pyrolysis and participate in reactions of plastic decomposition, initiating the scission of the synthetic polymer chain and yielding more light paraffins.The TGA indicated that the experimental char yield of WPC was lower than theoretical ones at final pyrolysis temperature.The reason could be that polyolenic polymers provide hydrogen during thermal process with wood biomass and recondensation or recombination of thermal cracking products of biomass is reduced, resulting in the less amount of char production and enhancement of volatile products formation.

Key words: Wood-plastic composites, biomass, plastic, thermo-gravimetric analysis, pyrolysis

孙剑平, 张志军, 王清文, 隋淑娟, 林晓娜. 木塑复合材料热解特性[J]. 化工进展, 2015, 34(s1): 156-161.

SUN Jianping, ZHANG Zhijun, WANG Qingwen, SUI Shujuan, LIN Xiaona. Pyrolysis characteristics of wood-plastic composites[J]. Chemical Industry and Engineering Progree, 2015, 34(s1): 156-161.

参考文献

[1] 晏群山,彭云云, 武书彬.蔗渣热解中纤维素与半纤维素的相互作用 [J].化工进展, 2011, 30(2): 442-448.

[2] 徐艺, 陈宇, 华德润, 等.固定床反应器中生物质/废塑料共热解制备燃料油 [J].化工进展, 2013, 32(3): 563-569.

[3] Panda A K, Singh R, Mishra D.Thermolysis of waste plastics to liquid fuel: A suitable method for plastic waste management and manufacture of value added products-A world prospective [J].Renewable and Sustainable Energy Reviews, 2010, 14(1): 233-248.

[4] Chaharmahali M, Mirbagheri J, Tajvidi M, et al.Mechanical and physical properties of wood-plastic composite panels [J]. Journal of Reinforced Plastics and Composites, 2010, 29(2): 310-319.

[5] Jakab E, Blazso M, Faix O.Thermal decomposition of mixtures of vinyl polymers and lignocellulosic materials [J]. Journal of Analytical and Applied Pyrolysis, 2001, 58:49-62.

[6] Jakab E, Varhegyi G, Faix O.Thermal decomposition of polypropylene in the presence of wood-derived materials [J]. Journal of Analytical and Applied Pyrolysis, 2000, 56(2): 273-285.

[7] Chattopadhyay J, Kim C, Kim R, et al.Thermogravimetric characteristics and kinetic study of biomass co-pyrolysis with plastics [J].Korean Journal of Chemical Engineering, 2008, 25(5): 1047-1053.

[8] Cai J, Wang Y, Zhou L, et al.Thermogravimetric analysis and kinetics of coal/plastic blends during co-pyrolysis in nitrogen atmosphere [J].Fuel Processing Technology, 2008, 89(1): 21-27.

[9] Zhou L, Wang Y, Huang Q, et al.Thermogravimetric characteristics and kinetic of plastic and biomass blends co-pyrolysis [J].Fuel Processing Technology, 2006, 87(11): 963-969.

[10] Zhou L, Luo T, Huang Q.Co-pyrolysis characteristics and kinetics of coal and plastic blends [J].Energy Conversion and Management, 2009, 50(3): 705-710.

[11] Önal E, Uzun B B, Putun A E.An experimental study on bio-oil production from co-pyrolysis with potato skin and high-density polyethylene (HDPE) [J].Fuel Processing Technology, 2012, 104:365-370.

[12] Brebu M, Spiridon I.Co-pyrolysis of LignoBoost^® lignin with synthetic polymers [J].Polymer Degradation and Stability, 2012, 97(11): 2104-2109.

[13] Sharypov V, Marin N, Beregovtsova N, et al.Co-pyrolysis of wood biomass and synthetic polymer mixtures.Part I: Influence of experimental conditions on the evolution of solids, liquids and gases [J].Journal of Analytical and Applied Pyrolysis, 2002, 64(1): 15-28.

[14] Marin N, Collura S, Sharypov V, et al.Co-pyrolysis of wood biomass and synthetic polymers mixtures.Part II: Characterisation of the liquid phases [J].Journal of Analytical and Applied Pyrolysis, 2002, 65(1): 41-55.

[15] Xia H F, Lin D Q, Chen Z M, et al.Purification of immunoglobulin of egg yolk with hydrophobic charge induction chromatography: Comparison of operation modes with packed bed and expanded bed[J].Separation Science and Technology, 2012, 47(16): 2366-2372.