化工进展

• 应用技术 • 上一篇    

MTBE深度脱硫技术的应用

张健民,赵金海,陈 珺   

  1. 中国石油集团公司东北炼化工程有限公司锦州设计院,辽宁 锦州121001
  • 出版日期:2013-06-05 发布日期:2013-06-05

Applications of deep desulfurization technology for MTBE production

ZHANG Jianmin,ZHAO Jinhai,CHEN Jun   

  1. Jinzhou Design Institute, CNPC Northeast Refining & Chemicals Engineering Company Limited, Jinzhou 121001,Liaoning,China
  • Online:2013-06-05 Published:2013-06-05

摘要: 为生产满足京Ⅴ汽油含硫标准的甲基叔丁基醚(MTBE)产品,探讨了MTBE深度脱硫原理,利用MTBE脱硫体系的热力学基础数据,采用化工流程模拟与分析的方法,对MTBE脱硫过程进行了全面系统的模拟研究。通过对工艺条件的综合分析,明确了单塔、双塔两种脱硫工艺的利弊,提出了适于不同工况的可行的MTBE深度脱硫技术方案。在MTBE装置改造中取得了良好的应用效果,MTBE产品的硫含量不高于3 mg/kg。

关键词: 甲基叔丁基醚, 深度脱硫, 流程模拟

Abstract: In order to meet the sulfur standard of Beijing V for MTBE product, we explored deep desulfurization for the production of MTBE. The basic data of thermodynamics of MTBE desulfurization are used in this thesis to simulation the process. Using the method of chemical process simulation and analysis, the process of MTBE desulfurization was studied. By comprehensive analysis of process technology conditions, the advantages and disadvantages of single column process technology and double columns process technology were analyzed, and the feasible technology solutions of MTBE deep desulfurization under different conditions was proposed. The suitable technology has been applied in the renovation of MTBE unit. The sulfur standard of MTBE is lower than 3 mg/kg。

Key words: MTBE, deep desulfurization, process simulation

京ICP备12046843号-2;京公网安备 11010102001994号
版权所有 © 《化工进展》编辑部
地址:北京市东城区青年湖南街13号 邮编:100011
电子信箱:hgjz@cip.com.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn