孔盘式液体分布器内液体流动对布液孔出流均匀性的影响

化工进展

孔盘式液体分布器内液体流动对布液孔出流均匀性的影响

于洪锋1，李鑫钢1，2，李洪1，2

1天津大学化工学院，天津 300072；2精馏技术国家工程研究中心，天津 300072

出版日期:2013-02-05 发布日期:2013-02-05

Influence of the flow in orifice pan liquid distributor on the uniformity of outflow through orifices

YU Hongfeng1，LI Xingang1，2，LI Hong1，2

1School of Chemical Engineering and Technology，Tianjin University，Tianjin 300072，China；2 National Engineering Research Center for Distillation Technology，Tianjin 300072，China

Online:2013-02-05 Published:2013-02-05

摘要/Abstract

摘要： 借助包括双欧拉均相多相流模型、VOF界面追踪方法和SST k-ω湍流模型的CFD模型，对孔盘式液体分布器内的流场对布液孔出流均匀性的影响进行研究。首先以单孔流动时的液体流量为标准值，通过与标准值的偏差来评估布液孔的出流不均。根据偏差的大小，可以衡量分布器内流动对布液孔出流的影响。然后结合孔前流动区概念对模拟结果进行分析，发现布液孔出流不均是由分布器内液体流动不均造成的。最后，提出了通过改变进料管位置来优化盘式液体分布器结构。计算结果表明，改变进料管的位置可以避免大规模不良分布，进而提高液体分布器的性能。

关键词: 孔盘式液体分布器, CFD模拟, 偏差, 出流不均, 结构优化

Abstract: A computational fluid dynamics (CFD) simulation，consisting of a homogeneous multiphase model，VOF method and SST turbulence model，was performed to investigate the influence of the flow in orifice pan liquid distributor on the uniformity of outflow through orifices. Firstly，a deviation from the standard value (flow rate of outflow through single orifice) was proposed to evaluate the uniformity of outflow through orifices. The influence of the flow in distributor on the outflow through orifices was quantified by the value of the deviation. Subsequently，based on the simulated results and the concept of the flow region in front of the orifices，it was found that the non-uniformity of the outflow through orifices was caused by the non-uniformity of the flow in distributor. Finally，the structure of the orifice pan liquid distributor was optimized by changing feed pipe positions. The simulated results showed that the liquid distribution performance was improved because the large-scale maldistribution was avoided when the feed positions were changed.

Key words: orifice pan liquid distributor, CFD simulation, deviation, non-uniformity of outflow through orifices, structure optimization

于洪锋1，李鑫钢1，2，李洪1，2. 孔盘式液体分布器内液体流动对布液孔出流均匀性的影响[J]. 化工进展.

YU Hongfeng1，LI Xingang1，2，LI Hong1，2. Influence of the flow in orifice pan liquid distributor on the uniformity of outflow through orifices[J]. Chemical Industry and Engineering Progree.

[1]	赵珍珍, 郑喜, 王雪琪, 王涛, 冯英楠, 任永胜, 赵之平. 聚酰胺复合膜微孔支撑基底的研究进展[J]. 化工进展, 2023, 42(4): 1917-1933.
[2]	尹洪贺, 沈绍传, 齐亮, 姚克俭. 新型多降液管塔板的流体力学性能及其流场CFD模拟[J]. 化工进展, 2022, 41(2): 601-608.
[3]	杨光, 邵卫卫. 印刷电路板换热器结构及传热关联式研究进展[J]. 化工进展, 2021, 40(S1): 13-26.
[4]	罗来明, 陈思安, 王海宁, 张劲, 卢善富, 相艳. 高温聚合物电解质膜燃料电池大尺寸（200cm²）多蛇形流场模拟与优化[J]. 化工进展, 2021, 40(9): 4975-4985.
[5]	蒋旭光, 魏邦吉, 胡林飞, 王汝佩, 宋菲菲, 陈少卿. 循环流化床锅炉外置换热器的研究现状及在垃圾焚烧炉中的应用[J]. 化工进展, 2021, 40(3): 1643-1652.
[6]	滕建鑫, 杨春英, 贺征. 惯性分离装置的性能分析及结构优化[J]. 化工进展, 2019, 38(05): 2074-2084.
[7]	冯荣, 孟欣, 邓建平, 张鹏超. 冷却塔逆用吸热做热源塔技术研究现状[J]. 化工进展, 2018, 37(11): 4135-4142.
[8]	赵斌, 高明非, 杜亚杰, 霍殿龙. 固体碱渣解聚均质器结构试验与数值模拟[J]. 化工进展, 2018, 37(06): 2101-2108.
[9]	杨友麒. 化学工业的转型升级和过程系统工程（PSE）[J]. 化工进展, 2018, 37(03): 803-814.
[10]	陈梓晟, 张涛, 麦礼杰, 吴锦华, 胡成生, 韦朝海. 正方形流化床结构参数改变和内构件强化的数值模拟解析[J]. 化工进展, 2017, 36(06): 1997-2009.
[11]	徐烨琨1，2，刘成1，2，李永辉1，2. 折流杆换热器的研究方法进展[J]. 化工进展, 2014, 33(07): 1671-1676.
[12]	刘俊，张永发，王影，陈磊，徐英，赵海滨. 低阶煤低温干馏炉中低温燃烧室温度场分布模拟及结构优化[J]. 化工进展, 2013, 32(09): 2112-2119.
[13]	范琦，尹侠. 蜂窝夹套流动与换热的数值模拟及其结构优化 [J]. 化工进展, 2009, 28(1): 31-.