化工进展 ›› 2021, Vol. 40 ›› Issue (11): 6315-6322.DOI: 10.16085/j.issn.1000-6613.2020-2289

• 精细化工 • 上一篇    下一篇

邻苯二甲酸二(乙二醇醚)酯绿色合成及增塑PVC性能

王凡1(), 谷佳泽1, 胡兵1, 谈继淮1(), 朱新宝1,2()   

  1. 1.南京林业大学化学工程学院,江苏 南京 210037
    2.江苏省醇醚工程技术研究中心,江苏 江阴 210000
  • 收稿日期:2020-11-17 修回日期:2021-01-12 出版日期:2021-11-05 发布日期:2021-11-19
  • 通讯作者: 谈继淮,朱新宝
  • 作者简介:王凡(1997—),男,硕士研究生,研究方向为多功能环保增塑剂。E-mail:wangfan970105@163.com
  • 基金资助:
    江苏高校优势学科建设工程项目

Green synthesis of phthalate-based alkoxy esters and application as high efficient plasticizers for PVC resin

WANG Fan1(), GU Jiaze1, HU Bing1, TAN Jihuai1(), ZHU Xinbao1,2()   

  1. 1.College of Chemical Engineering, Nanjing Forestry University, Nanjing 210037, Jiangsu, China
    2.Jiangsu Engineering Research Center of Alcohol Ether, Jiangyin 210000, Jiangsu, China
  • Received:2020-11-17 Revised:2021-01-12 Online:2021-11-05 Published:2021-11-19
  • Contact: TAN Jihuai,ZHU Xinbao

摘要:

以邻苯二甲酸酐和低毒型乙二醇醚(乙二醇甲/乙/丁醚、二乙二醇甲/乙/丁醚)为原料,固体酸SO42-/TiO2为催化剂,采用直接酯化法催化合成邻苯二甲酸二(乙二醇醚)酯(酯化率?97.0%),并利用傅里叶红外光谱(FTIR)、1H核磁共振(1H NMR)确定产物结构。对合成产物邻苯二甲酸二(乙二醇醚)酯的基本物性(酯含量、酸度、黏度、加热减量等)及其增塑后聚氯乙烯(PVC)制品的力学性能、热稳定性以及抗迁移性能进行测试。结果表明,邻苯二甲酸二(乙二醇醚)酯的增塑性能与其结构中乙氧基数目成正比,而与其末端烷基碳链长度呈现先增加后下降趋势。与邻苯二甲酸二辛酯(DOP)增塑后PVC制品(PVC/DOP)相比,邻苯二甲酸二(二乙二醇乙醚)酯增塑后PVC制品(PVC/DEEEP)的断裂伸长率和拉伸强度分别提高87.4%和3.4MPa,初始热分解温度(T5%)提高21.5℃。

关键词: 催化, 酯化, 邻苯二甲酸醇醚酯, 环保增塑剂, 聚氯乙烯树脂, 聚合物加工

Abstract:

Environment-friendly plasticizers of dialkyloxy phthalates were synthesized via direct esterification using phthalic anhydride and low toxic alcohol ethers (ethylene glycol methyl/ethylene/butyl ether, diethylene glycol methyl/ethylene/butyl ether) as feedstocks. Under the catalytic of of SO42-/TiO2, theesterification rate of the reaction was higher than 97.0%, and the structure of purified product was confirmed by FTIR and 1H NMR. The basic physical properties of dialkyloxy phthalate esters including ester content, acidity, viscosity and heating loss, were studied and then they were used as plasticizers for PVC resin. The results indicated that the plasticizing properties of dialkyloxy phthalate including mechanical properties, thermal stability and migration resistance of plasticized PVC were related to the length of ethoxyl group and terminal alkyl chain in their structures, and the plasticizing properties were increased as increasing the number of ethoxyl groups. However, with increasing length of alkyl carbon chain in the structure of dialkyloxy phthalate esters, the properties of plasticized PVC increased at first and then decreased. Compared with the PVC plasticized by traditional DOP (PVC/DOP), the elongation at break, tensile strength and thermal decomposition temperature (T5%) of PVC plasticized by diethylene glycol monoethyl ether phthalate (PVC/DEEEP) were increased by 87.4%, 3.4MPa and 21.5℃, respectively.

Key words: catalysis, esterification, phthalates, environment-friendly plasticizer, polyvinyl chloride(PVC) resin, polymer processing

中图分类号: 

京ICP备12046843号-2;京公网安备 11010102001994号
版权所有 © 《化工进展》编辑部
地址:北京市东城区青年湖南街13号 邮编:100011
电子信箱:hgjz@cip.com.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn