硅溶胶粒径大小对SAPO-34合成及甲醇制烯烃催化性能的影响

doi:10.16085/j.issn.1000-6613.2019-1999

摘要/Abstract

摘要：

在合成SAPO-34的过程中加入不同粒径的硅溶胶来考察其对分子筛酸性和甲醇制烯烃（MTO）性能的影响。采用XRD、SEM、FTIR、NH₃-TPD和²⁹Si MAS NMR等表征手段对合成的分子筛进行表征，并通过固定床反应器对制备的SAPO-34分子筛进行MTO催化性能评价。实验结果表明，不同粒径的硅溶胶对合成的分子筛酸性有很大影响，通过NH₃-TPD表征结果可以看出，随着硅溶胶粒径的增大，分子筛的强酸量、弱酸量均降低。由分子筛的NMR表征结果发现，大颗粒硅溶胶合成的SAPO-34分子筛中存在硅岛。从MTO性能评价结果可以发现，适宜的硅溶胶粒径更有利于提高催化剂的双烯选择性和催化寿命。

关键词: 硅溶胶, 合成, 分子筛, 催化, 甲醇制烯烃, 酸性, 粒径

Abstract:

The effect of particle size of silica sol on the acidity and MTO reaction performance of SAPO-34 was investigated. The synthesized molecular sieves were characterized by XRD, SEM, FTIR, NH₃-TPD and ²⁹Si MAS NMR, and their catalytic performance was evaluated on a fixed bed micro reactor at atmospheric pressure. The experimental results displayed that the particle size of silica sol had significantly affected the acidity of the prepared molecular sieves. The NH₃-TPD characterization results demonstrated that the strong and weak acidity of the molecular sieves decreased with the increase of the particle size of the silica sol. The ²⁹Si MAS NMR results indicated that the use of silica sol with large particles led to the formation of silicon island in the structure of SAPO-34 molecular sieve. From the results of MTO performance evaluation, it could be found that the silica sol with suitable particle size was more conducive to improve the selectivity of light olefins and the catalyst’s life.

Key words: silica sol, synthesis, molecular sieves, catalysis, methanol to olefin, acidity, particle size

中图分类号:

O643.36

李渊, 孙丹, 杨晨芳, 谭小耀. 硅溶胶粒径大小对SAPO-34合成及甲醇制烯烃催化性能的影响[J]. 化工进展, 2020, 39(9): 3701-3707.

Yuan LI, Dan SUN, Chenfang YANG, Xiaoyao TAN. Effect of silica sol particle size on SAPO-34 synthesis and catalytic performance in methanol to olefin reaction[J]. Chemical Industry and Engineering Progress, 2020, 39(9): 3701-3707.

参考文献

1	ZHANG L, WANG H, LIU G, et al. Methanol-to-olefin conversion over H-MCM-22 catalyst[J]. Journal of Molecular Catalysis A?: Chemical, 2016, 411(1): 311-316.
2	LOSCH P, BOLTZ M, LOUIS B, et al. Catalyst optimization for enhanced propylene formation in the methanol-to-olefins reaction[J]. Comptes Rendus Chimie, 2015, 18(3): 330-335.
3	SALMASI M, FATEMI S, HASHEMI S J. MTO reaction over SAPO-34 catalysts synthesized by combination of TEAOH and morpholine templates and different silica sources[J]. Scientia Iranica, 2012, 19(6): 1632-1637.
4	LIU F, WANG X, XU F, et al. Fabrication and characterization of composites comprising (CHA)SAPO-34 with (MFI)ZSM-5 topologies and their catalytic performances on MTO reaction[J]. Microporous and Mesoporous Materials, 2017, 252: 197-206.
5	DAI W, WU G, LI L, et al. Mechanisms of the deactivation of SAPO-34 materials with different crystal sizes applied as MTO catalysts[J]. ACS Catalysis, 2013, 3(4): 588-596.
6	DAI W, WANG X, WU G, et al. Methanol-to-olefin conversion on silicoaluminophosphate catalysts: effect of br?nsted acid sites and framework structures[J]. ACS Catalysis, 2011, 1(4): 292-299.
7	AGHAMOHAMMADI S, HAGHIGHI M, EBRAHIMI A. Pathways in particle assembly by ultrasound-assisted spray-drying of kaolin/SAPO-34 as a fluidized bed catalyst for methanol to light olefins[J]. Ultrasonics Sonochemistry, 2019, 53: 237-251.
8	áLVARO-MU?OZ T, MáRQUEZ-áLVAREZ C, SASTRE E. Use of different templates on SAPO-34 synthesis: effect on the acidity and catalytic activity in the MTO reaction[J]. Catalysis Today, 2012, 179(1): 27-34.
9	SADEGHPOUR P, HAGHIGHI M. DEA/TEAOH templated synthesis and characterization of nanostructured NiAPSO-34 particles: effect of single and mixed templates on catalyst properties and performance in the methanol to olefin reaction[J]. Particuology, 2015, 19: 69-81.
10	GUO L, ZHU W, MIAO P, et al. Intergrowth silicoaluminophosphate molecular sieves synthesized and their catalytic performances for methanol to olefins reaction[J]. Industrial and Engineering Chemistry Research, 2018, 57(31): 10398-10402.
11	ZHANG L, HUANG Y. New insights into formation of molecular sieve SAPO-34 for MTO reactions[J]. Journal of Physical Chemistry C, 2016, 120(45): 25945-25957.
12	BHAWE Y, MOLINER-MARIN M, LUNN J D, et al. Effect of cage size on the selective conversion of methanol to light olefins[J]. ACS Catalysis, 2012, 2(12): 2490-2495.
13	GALADIMA A, MURAZA O. Recent developments on silicoaluminates and silicoaluminophosphates in the methanol-to-propylene reaction: a mini review[J]. Industrial and Engineering Chemistry Research, 2015, 54(18): 4891-4905.
14	SADEGHPOUR P, HAGHIGHI M. Incorporation of mono and bimetallic MnNi into SAPO-34 framework used in conversion of methanol to ethylene and propylene: alteration of acidic properties and catalytic performance[J]. Asia-Pacific Journal of Chemical Engineering, 2018, 13(1): 1-19.
15	AGHAEI E, HAGHIGHI M. Hydrothermal synthesis of nanostructured Ce-SAPO-34: high-performance and long-lifetime catalyst with various ceria contents for methanol to light olefins conversion[J]. Microporous and Mesoporous Materials, 2018, 270(10): 227-240.
16	AGHAMOHAMMADI S, HAGHIGHI M. Effect of template combinations (TEA/MOR, TEA/DEA, DEA/MOR) in synthesis of nanostructured CoAPSO-34 catalyst used in conversion of methanol to light olefins[J]. Advanced Powder Technology, 2016, 27(4): 1738-1749.
17	SUN C, WANG Y, WANG Z, et al. Fabrication of hierarchical ZnSAPO-34 by alkali treatment with improved catalytic performance in the methanol-to-olefin reaction[J]. Comptes Rendus Chimie, 2018, 21(1): 61-70.
18	WANG P, LV A, HU J, et al. In situ synthesis of SAPO-34 grown onto fully calcined Kaolin microspheres and its catalytic properties for the MTO reaction[J]. Industrial and Engineering Chemistry Research, 2011, 50(17): 9989-9997.
19	SALIH H A, MURAZA O, ABUSSAUD B, et al. Catalytic enhancement of SAPO-34 for methanol conversion to light olefins using in situ metal incorporation[J]. Industrial and Engineering Chemistry Research, 2018, 57(19): 6639-6646.
20	RAHIMI K, TOWFIGHI J, SEDIGHI M, et al. The effects of SiO₂/Al₂O₃ and H₂O/Al₂O₃ molar ratios on SAPO-34 catalysts in methanol to olefins (MTO) process using experimental design[J]. Journal of Industrial and Engineering Chemistry, 2016, 35: 123-131.
21	BAHRAMI H, DARIAN J T, SEDIGHI M. Simultaneous effects of water, TEAOH and morpholine on SAPO-34 synthesis and its performance in MTO process[J]. Microporous and Mesoporous Materials, 2018, 261: 111-118.

[1]	张明焱, 刘燕, 张雪婷, 刘亚科, 李从举, 张秀玲. 非贵金属双功能催化剂在锌空气电池研究进展[J]. 化工进展, 2023, 42(S1): 276-286.
[2]	时永兴, 林刚, 孙晓航, 蒋韦庚, 乔大伟, 颜彬航. 二氧化碳加氢制甲醇过程中铜基催化剂活性位点研究进展[J]. 化工进展, 2023, 42(S1): 287-298.
[3]	谢璐垚, 陈崧哲, 王来军, 张平. 用于SO₂去极化电解制氢的铂基催化剂[J]. 化工进展, 2023, 42(S1): 299-309.
[4]	杨霞珍, 彭伊凡, 刘化章, 霍超. 熔铁催化剂活性相的调控及其费托反应性能[J]. 化工进展, 2023, 42(S1): 310-318.
[5]	郑谦, 官修帅, 靳山彪, 张长明, 张小超. 铈锆固溶体Ce_0.25Zr_0.75O₂光热协同催化CO₂与甲醇合成DMC[J]. 化工进展, 2023, 42(S1): 319-327.
[6]	赵巍, 赵德银, 李世瀚, 刘洪达, 孙进, 郭艳秋. 三嗪型天然气管道缓蚀型减阻剂合成与应用[J]. 化工进展, 2023, 42(S1): 391-399.
[7]	王正坤, 黎四芳. 双子表面活性剂癸炔二醇的绿色合成[J]. 化工进展, 2023, 42(S1): 400-410.
[8]	陈崇明, 陈秋, 宫云茜, 车凯, 郁金星, 孙楠楠. 分子筛基CO₂吸附剂研究进展[J]. 化工进展, 2023, 42(S1): 411-419.
[9]	高雨飞, 鲁金凤. 非均相催化臭氧氧化作用机理研究进展[J]. 化工进展, 2023, 42(S1): 430-438.
[10]	王乐乐, 杨万荣, 姚燕, 刘涛, 何川, 刘逍, 苏胜, 孔凡海, 朱仓海, 向军. SCR脱硝催化剂掺废特性及性能影响[J]. 化工进展, 2023, 42(S1): 489-497.
[11]	邓丽萍, 时好雨, 刘霄龙, 陈瑶姬, 严晶颖. 非贵金属改性钒钛基催化剂NH₃-SCR脱硝协同控制VOCs[J]. 化工进展, 2023, 42(S1): 542-548.
[12]	许友好, 王维, 鲁波娜, 徐惠, 何鸣元. 中国炼油创新技术MIP的开发策略及启示[J]. 化工进展, 2023, 42(9): 4465-4470.
[13]	耿源泽, 周俊虎, 张天佑, 朱晓宇, 杨卫娟. 部分填充床燃烧器中庚烷均相/异相耦合燃烧[J]. 化工进展, 2023, 42(9): 4514-4521.
[14]	程涛, 崔瑞利, 宋俊男, 张天琪, 张耘赫, 梁世杰, 朴实. 渣油加氢装置杂质沉积规律与压降升高机理分析[J]. 化工进展, 2023, 42(9): 4616-4627.
[15]	王晋刚, 张剑波, 唐雪娇, 刘金鹏, 鞠美庭. 机动车尾气脱硝催化剂Cu-SSZ-13的改性研究进展[J]. 化工进展, 2023, 42(9): 4636-4648.