化工进展 ›› 2020, Vol. 39 ›› Issue (6): 2495-2502.DOI: 10.16085/j.issn.1000-6613.2019-1378

• 资源与环境化工 • 上一篇    下一篇

废旧磷酸铁锂正极粉磷酸浸出过程的优化及宏观动力学

万青珂1,2(), 张洋1(), 郑诗礼1, 张盈1, 王晓健1, 娄文博1,3   

  1. 1.中国科学院过程工程研究所绿色过程与工程重点实验室,湿法冶金清洁生产技术国家工程实验室,北京 100190
    2.中国科学院大学,北京 100049
    3.东北大学冶金学院,辽宁 沈阳 110819
    4.Dresden University of Technology, 01062 Dresden, Germany
  • 出版日期:2020-06-05 发布日期:2020-06-16
  • 通讯作者: 张洋
  • 作者简介:万青珂(1995—),女,硕士研究生,研究方向为废旧电池回收。E-mail:wanqingke17@ucas.ac.cn
  • 基金资助:
    国家自然科学基金(51761135108)

Process optimization and kinetics for leaching spent lithium iron phosphate cathode powder by phosphate acid

Qingke WAN1,2(), Yang ZHANG1(), Shili ZHENG1, Ying ZHANG1, Xiaojian WANG1, Wenbo LOU1,3, J. Weigand JAN4, Wenzel MARCO4   

  1. 1.National Engineering Laboratory for Hydrometallurgical Cleaner Production Technology, CAS Key Laboratory of Green Process and Engineering, Institute of Process Engineering, Chinese Academy of Sciences, Beijing 100190, China
    2.University of Chinese Academy of Sciences, Beijing 100049, China
    3.School of Metallurgy, Northeastern University, Shenyang 110819, Liaoning, China
    4.Dresden University of Technology, 01062 Dresden, Germany
  • Online:2020-06-05 Published:2020-06-16
  • Contact: Yang ZHANG

摘要:

随着新能源汽车产业快速发展,磷酸铁锂动力电池退役量爆发式增长,回收需求迫切,但面临回收利用经济性较差的难题。正极材料价值较高,本文提出采用磷酸浸出废旧正极材料以制备电池用磷酸铁,但铝等杂质的分离是关键。本文以含铝的磷酸铁锂正极粉为原料,开展了磷酸浸出过程优化及宏观动力学研究,重点研究了酸料比、浸出温度、液固比、搅拌速度等参数对磷酸铁锂及铝浸出效果的影响规律,并考察了磷酸铁锂在磷酸溶液中浸出的宏观动力学。研究结果表明,在酸料比1.1mL/g、温度20℃、液固比(5∶1)mL/g、搅拌速度400r/min、浸出时间120min条件下,磷酸铁锂浸出率大于93%,铝浸出率小于20%;磷酸铁锂正极粉磷酸浸出过程符合无固态产物层的收缩核模型,表观活化能为24.62kJ/mol,浸出过程受扩散控制。

关键词: 废旧磷酸铁锂, 磷酸, 浸取, 动力学, 回收

Abstract:

With the rapid development of new energy vehicles, the amount of spent lithium iron phosphate (LFP) power batteries increase explosively, and the demand for recycling the spent LFP batteries is very urgent, which however still faces the problem of poor economics of recycling. Due to the high value of the cathode materials in LFP battery, we proposed a new method for preparing battery grade iron phosphate from the spent LFP cathode material by using phosphoric acid, whose key is to remove the impurities such as Al. In this paper, the leaching of aluminum-containing lithium iron phosphate cathode powder was optimized and the process kinetics was studied. The effects of the ratio of acid to material, leaching temperature, liquid-solid ratio and stirring speed on the leaching efficiency of lithium iron phosphate and aluminum, as well as the leaching kinetics in phosphoric acid solution, were also investigated. The results showed that under the optimal conditions of ratio of acid to material 1.1mL/g, temperature 20℃, liquid-solid ratio (5∶1)mL/g, stirring speed 400r/min and reaction time 120min, the leaching efficiency of lithium iron phosphate was above 93%, and the leaching efficiency of aluminum is below 20%. The leaching model was fit to the shrinking core model without solid product layer, yielding an apparent activation energy of 24.62kJ/mol with the liquid film diffusion as the rate limiting step.

Key words: spent lithium iron phosphate, phosphate acid, leaching, kinetics, recovery

中图分类号: 

京ICP备12046843号-2;京公网安备 11010102001994号
版权所有 © 《化工进展》编辑部
地址:北京市东城区青年湖南街13号 邮编:100011
电子信箱:hgjz@cip.com.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn