[1] 范普兴, 龚岩, 张庆, 等. 多喷嘴对置式气化炉内撞击火焰高度研究[J].中国电机工程学报, 2014, 34(17):2761-2768. FAN Puxing, GONG Yan, ZHANG Qing, et al. Study on the characteristics of impinging flame height in an opposed multi-burner gasifier[J]. Proceedings of the CSEE, 2014, 34(17):2761-2768.
[2] 黄桃花, 王亦飞, 焦延涛, 等.高效能两段组合式煤气化过程热态试验[J].化工学报, 2010, 61(11):2924-2930. HUANG Taohua, WANG Yifei, JIAO Yantao, et al. Hot-state experiment of high-performance two stage combined coal gasification[J]. CIESC Journal, 2010, 61(11):2924-2930.
[3] 胡文斌. 高温煤气化动力学及两段式气化炉的模型研究[D]. 北京:清华大学, 2005. HU Wenbin. Kinetics of coal gasification at high temperature and modeling of two-stage entrained flow coal gasifier[D]. Beijing:Tsinghua University, 2005.
[4] 乌晓江, 张忠孝, 朴桂林, 等. 高灰熔点煤高温下煤焦CO2/水蒸气气化反应特性的实验研究[J]. 中国电机工程学报, 2007, 27(32):24-28. WU Xiaojiang, ZHANG Zhongxiao, PIAO Guilin, et al. Experimental study on gasification reaction characteristics of Chinese high ash fusion temperature coal with CO2 and steam at elevated temperature[J]. Proceedings of the CSEE, 2007, 27(32):24-28.
[5] 周俊虎, 杨卫娟, 刘建忠, 等. 锅炉变负荷引起的水冷壁渣层热应力[J].化工学报, 2003, 54(12):1678-1682. ZHOU Junhu, YANG Weijuan, LIU Jianzhong, et al. Thermal stress of slag on wall tube created by boiler load shift[J]. Journal of Chemical Industry and Engineering(China), 2003, 54(12):1678-1682.
[6] 林伟宁, 梁钦锋, 刘海峰, 等.水冷壁气化炉变工况温度及热应力分析[J].化工学报, 2009, 60(10):2568-2573. LIN Weining, LIANG Qinfeng, LIU Haifeng, et al. Temperature and thermal stress analysis in membrane wall gasifier under varied work conditions[J]. CIESC Journal, 2009, 60(10):2568-2573.
[7] ZBOGAR A, FRANDSEN F, JENSEN P, et al. Shedding of ash deposits[J]. Progress in Energy and Combustion Science, 2009, 35(1):31-56.
[8] WANG P, MASSOUDI M. Slag behavior in gasifiers. Part Ⅰ:Influence of coal properties and gasification conditions[J]. Energies, 2013, 6(2):784-806.
[9] LIN W, LIANG Q, LIU H, et al. Study on the temperature and thermal stress of the slag layer cooling process in a membrane wall entrained-flow gasifier[J]. Energy & Fuels, 2011, 25(6):2579-2586.
[10] LIN W, LIANG Q, YU G, et al. Numerical modeling for non-steady thermal stress analysis of slag layer in a membrane wall entrained-flow gasifier[J]. Fuel, 2011, 90(7):2396-2403.
[11] RÖSLER J, BÄKER M, AUFZUG K. A parametric study of the stress state of thermal barriercoatings. Part Ⅰ. Creep relaxation[J]. Acta Materialia, 2004, 52(16):4809-4817.
[12] BÄKER M, RÖSLER J, HEINZE G. A parametric study of the stress state of thermal barrier coatings. Part Ⅱ. Cooling stresses[J]. Acta Materialia, 2005, 53(2):469-476.
[13] AJDELSZTAJN L, HULBERT D, MUKHERJEE A, et al. Creep deformation mechanism of cryomilled NiCrAlY bond coat material[J]. Surface and Coatings Technology, 2007, 201(24):9462-9467.
[14] TOPARLI M, SEN F, CULHA O, et al. Thermal stress analysis of HVOF sprayed WC_Co/NiAl multilayer coatings on stainless steel substrate using finite element methods[J]. Journal of Materials Processing Technology, 2007, 190(1/2/3):26-32.
[15] BAREA R, BELMONTE M, OSENDI M, et al. Thermal conductivity of Al2O3/SiC platelet composites[J]. Journal of the European Ceramic Society, 2003, 23(11):1773-1778.
[16] LIU H, TAO J, GAUTREAU Y, et al. Simulation of thermal stresses in SiC-Al2O3 composite tritium penetration barrier by finite-element analysis[J]. Materials & Design, 2009, 30(8):2785-2790.
[17] 吴清仁, 文璧璇. SiC材料导热系数和热膨胀系数与温度关系[J]. 华南理工大学学报(自然科学版), 1996, 24(3):11-15. WU Q R, WEN B X. Studies on temperature dependence of thermal conductivity and linear expansion for SiC material[J]. Journal of South China University of Technology(Natural Science), 1996, 24(3):11-15.
[18] ZBOGAR A, FRANDSEN F J, JENSEN P, et al. Heat transfer in ash deposits:a modelling tool-box[J]. Progress in Energy and Combustion Science, 2005, 31(5/6):371-421. |