化工进展 ›› 2017, Vol. 36 ›› Issue (05): 1946-1952.DOI: 10.16085/j.issn.1000-6613.2017.05.050

• 应用技术 • 上一篇    下一篇

THHC-I轻油型加氢裂化催化剂的研究开发与工业化生产

肖寒1,2, 于海斌1,2, 张景成1,2, 张玉婷1, 南军1,2, 臧甲忠1,2   

  1. 1. 中国海油天津化工研究设计院有限公司, 天津 300131;
    2. 天津市炼化催化技术工程中心, 天津 300131
  • 收稿日期:2016-09-19 修回日期:2017-01-19 出版日期:2017-05-05 发布日期:2017-05-05
  • 通讯作者: 于海斌,教授级高级工程师,研究方向为氧化铝与分子筛基催化剂与催化技术。
  • 作者简介:肖寒(1985-),男,工程师,硕士,主要从事分子筛型加氢催化剂及工艺研究。E-mail:xiohancup@163.com。
  • 基金资助:
    中国海油总公司“十二五”重大科技项目(CNOOC-KY125ZDXM26TJY03TJY2014-03)

Development and industrial production of THHC-I hydrocracking catalyst for producing light fraction

XIAO Han1,2, YU Haibin1,2, ZHANG Jingcheng1,2, ZHANG Yuting1, NAN Jun1,2, ZANG Jiazhong1,2   

  1. 1. CNOOC Tianjin Chemical Research and Design Institute Limited Corporation, Tianjin 300131, China;
    2. Tianjin Refining and Catalytic Technology Engineering Center, Tianjin 300131, China
  • Received:2016-09-19 Revised:2017-01-19 Online:2017-05-05 Published:2017-05-05

摘要: 针对高氮、环烷基特性的馏分油多产重整原料加氢裂化工艺,本文通过改性Y分子筛硅铝比、载体中分子筛含量与催化剂中Ni-Mo金属含量的优化,经过中试制备、工业放大与工业化生产,成功地开发出THHC-I加氢裂化催化剂。工业生产THHC-I加氢裂化的物理化学性质与催化剂性能及中试制备、工业放大的催化剂相当,催化剂对舟山焦化重馏分油的1500h中试评价结果为:>345℃馏分转化率75.8%,<170℃石脑油收率42.7%,石脑油中硫含量为1μg/g,氮含量为0.6μg/g,柴油中硫含量为5μg/g,氮含量为3μg/g。表明THHC-I加氢裂化对焦化重馏分油具有优异的加氢裂化活性、轻油选择性与稳定性。该催化剂完成30t的生产,并成功应用于舟山石化焦化重馏分油加氢裂化多产重整原料工艺中。

关键词: 加氢, 催化剂, 分子筛, 选择性

Abstract: Regarding the prolific reforming raw material technology for the high nitrogen and naphthenic distillate hydrocracking,China National Offshore Oil Corporation (CNOOC) Tianjin Chemical Research & Design Institute Limited Corporation,by modifying the silica alumina ratio of the molecular sieves,the molecular sieves content of the supporter and the metal content of the catalysts,has successfully developed THHC-I hydrocracking catalyst,after pilot preparation,industrial amplification,and industrial production. The THHC-I hydrocracking catalysts for industrial production show the same physical-chemical properties and catalytic performance as the hydrocracking catalysts for pilot preparation and industrial amplification. The 1500h assessment results of the catalyst pilot test for Zhoushan coking heavy distillates show that the conversion of distillate with boiling point>345℃ is 75.8% and the liquid yield of naphtha with boiling point<170℃ is 42.7%. The sulfur and nitrogen content of naphtha are 1μg/g,0.6μg/g respectively. The sulfur and nitrogen content of diesel are 5μg/g,3μg/g respectively. The assessment results also indicate that THHC-I hydrocracking catalysts show excellent cracking activity,selectivity and stability. THHC-I catalyst has been accomplished 30 tons of production,and successfully applied in the coker heavy distillate hydrocracking using the prolific reforming raw material technology in CNOOC Zhoushan Petrochemical.

Key words: hydrogenation, catalyst, molecular sieves, selectivity

中图分类号: 

京ICP备12046843号-2;京公网安备 11010102001994号
版权所有 © 《化工进展》编辑部
地址:北京市东城区青年湖南街13号 邮编:100011
电子信箱:hgjz@cip.com.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn