化工进展 ›› 2017, Vol. 36 ›› Issue (01): 181-188.DOI: 10.16085/j.issn.1000-6613.2017.01.023

• 工业催化 • 上一篇    下一篇

常见金属氧化物烟气脱硫研究进展

孙丽娜1, 李凯1, 汤立红1, 刘娜1, 宁平1, 孙鑫1,2, 张旭3   

  1. 1 昆明理工大学环境科学与工程学院, 云南 昆明 650504;
    2 省部共建复杂有色金属资源清洁利用国家重点实验室, 云南 昆明 650093;
    3 昆明市城市排水监测站, 云南 昆明 650034
  • 收稿日期:2016-04-14 修回日期:2016-06-10 出版日期:2017-01-05 发布日期:2017-01-05
  • 通讯作者: 孙鑫,博士,讲师,主要从事大气污染控制及资源化技术的研究。E-mail:sunxin_kmust@163.com。
  • 作者简介:孙丽娜(1993-),女,硕士研究生,研究方向为大气污染控制。E-mail xiaohai311521@163.com。

Research progress of common metal oxides for flue gas desulfurization

SUN Lina1, LI Kai1, TANG Lihong1, LIU Na1, NING Ping1, SUN Xin1,2, ZHANG Xu3   

  1. 1 Faulty of Environmental Science and Engineering, Kunming University of Science & Technology, Kunming 650093, Yunnan, China;
    2 State Key Laboratory of Clean and Exploitation of Complex Non-ferrous Metal Resources, Kunming 650093, Yunnan, China;
    3 Kunming Urban Drainage Stations, Kunming 650034, Yunnan, China
  • Received:2016-04-14 Revised:2016-06-10 Online:2017-01-05 Published:2017-01-05

摘要: 对几种常见金属氧化物的烟气脱硫(SO2)进行了研究,分别从干法、湿法以及半干法详细介绍了常见金属氧化物的脱硫效果及影响脱硫效果的各种因素。干法脱硫剂主要发生吸附反应、氧化反应;湿法脱硫主要是液相催化氧化作用;半干法脱硫以CaO为主要脱硫成分。干法脱硫催化剂有再生操作复杂、制备成本较高的缺点;湿法烟气脱硫效率高、适应范围广,成为主要的烟气脱硫方法,但湿法脱硫也存在占地面积大、技术复杂、脱硫过程中会造成资源浪费等问题。本文对比总结了常见金属氧化物的脱硫特点及其工业应用现状,分析了矿浆脱硫的可行性,同时对矿浆脱硫的研究前景提出展望,从而进一步为工业废气净化研究奠定基础。

关键词: 金属氧化物, 烟气脱硫, 催化剂载体, 催化作用, 氧化

Abstract: In this paper,the desulfurization effect of several common flue gas desulfurization metal oxides(SO2) and the influence factors were studied,from the aspects of dry,wet and semi-dry desulfurization factors in detail. Dry desulfurization mainly includes adsorption reaction and oxidation reaction,while wet desulfurization mainly has liquid phase catalytic oxidation,and the main components of desulfurization of semi-dry desulfurization is calcium oxide. Dry desulfurization catalyst has the disadvantages of complex regeneration operation and high preparation cost,while wet flue gas desulfurization technology has high desulfurization efficiency,and wide range applications,which makes it a major method of flue gas desulfurization. However,wet desulfurization also requires large space,and complicated technology,and has the resource wastes and other issues. In this paper,we also compare and summarize the common metal oxide desulfurization characteristics and industrial application situation,analyze the feasibility of pulp desulfurization. The prospects of pulp desulfurization research,which provide a foundation for the research of industrial waste gas purification.

Key words: metal oxide, flue gas desulfurization, catalyst support, catalysis, oxidation

中图分类号: 

京ICP备12046843号-2;京公网安备 11010102001994号
版权所有 © 《化工进展》编辑部
地址:北京市东城区青年湖南街13号 邮编:100011
电子信箱:hgjz@cip.com.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn