化工进展 ›› 2018, Vol. 37 ›› Issue (10): 3788-3798.DOI: 10.16085/j.issn.1000-6613.2017-2125

• 能源加工与技术 • 上一篇    下一篇

煤直接液化性能的影响因素浅析

桑磊, 舒歌平   

  1. 中国神华煤制油化工有限公司上海研究院, 煤炭直接液化国家工程实验室, 上海 201108
  • 收稿日期:2017-10-16 修回日期:2018-01-18 出版日期:2018-10-05 发布日期:2018-10-05
  • 通讯作者: 舒歌平,博士,研究员,总工程师,主要从事煤直接液化工艺、催化剂和设备的研发。
  • 作者简介:桑磊(1981-),男,博士,工程师,研究方向为煤、石油的清洁利用及轻烃转化。E-mail:wsh-sanglei@163.com。
  • 基金资助:
    国家重点研发计划项目(2016YFB0600303)。

Influencing factors of the performance of direct coal liquefaction process: a brief analysis

SANG Lei, SHU Geping   

  1. Shanghai Research Institute, National Engineering Laboratory for Direct Coal Liquefaction, China Shenhua Coal to Liquid and Chemical Co., Ltd., Shanghai 201108, China
  • Received:2017-10-16 Revised:2018-01-18 Online:2018-10-05 Published:2018-10-05

摘要: 发展煤直接液化技术是我国缓解石油供需矛盾和保障能源安全的一个较好的战略选择,但影响煤直接液化性能的因素很多,对这些影响因素进行阐述分析是该技术进一步发展的关键。本文首先在反应原料方面,主要综述了煤的煤化程度、官能团、显微组分和无机矿物质,催化剂的种类、特点、作用、添加量和研究热点,溶剂的种类、作用和研究现状,反应气氛的种类和作用,并指出:煤化程度适中、镜质组含量较高、灰分较低的煤更适宜作为直接液化原料;煤粉担载的原位合成高分散铁基催化剂性能较好,并且经过了工业装置的验证;含有较多部分氢化稠环芳香烃的物料适宜作为煤直接液化溶剂;氢气提供活性氢的机理及其他廉价气体替代氢气气氛还需进一步研究。然后在工艺条件方面,主要分析讨论了反应温度、反应压力、煤浆浓度、进料空速和气液比高低的影响,认为需综合考虑较高的油收率和装置处理量及装置的平稳运行,选择适当的工艺条件。最后指出这些工作将为煤直接液化技术的完善提供一定的参考,我国的煤直接液化产业也将取得良好的发展前景。

关键词: 煤直接液化, 性能, 影响因素, 反应原料, 工艺条件

Abstract: Developing direct coal liquefaction technology is a better strategic choice for China to alleviate the contradiction between supply and demand of petroleum and guarantee energy security. However, there are many factors which affect the performance of direct coal liquefaction, and the analysis of these factors is the key to further development of the technology. First in terms of raw materials, mainly summarizes the rank of coal, functional groups of coal, macerals and inorganic minerals of coal, the type, characteristic, function, content and research hotspot of catalyst, the type, function and research status of solvent, and the type and function of reaction atmosphere. It points out the following points:The coal with modest rank, higher content of vitrinite and low content of ash is more suitable for direct liquefaction. Coal powder loaded high dispersion ferro-based catalysts by in situ synthesis is preferable, and it is verified by industry. The materials with more partially hydrogenated polycyclic aromatic hydrocarbons are suitable for direct coal liquefaction solvent. The mechanism of hydrogen to provide active hydrogen and other cheap gases to replace the hydrogen atmosphere need further study. And then in terms of process conditions, the effects of rise or decrease of reaction temperature, reaction pressure, coal slurry concentration, feed space velocity and gas-liquid ratio are analyzed and discussed, pointed out that need to be comprehensive consideration of higher oil yield and unit capacity and the unit running smoothly, to select the appropriate process conditions. Finally, it is pointed out that these works will provide some reference for the improvement of direct coal liquefaction technology, and China's direct coal liquefaction industry will have good prospects.

Key words: direct coal liquefaction, performance, influencing factors, reaction material, process condition

中图分类号: 

京ICP备12046843号-2;京公网安备 11010102001994号
版权所有 © 《化工进展》编辑部
地址:北京市东城区青年湖南街13号 邮编:100011
电子信箱:hgjz@cip.com.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn