化工进展 ›› 2018, Vol. 37 ›› Issue (07): 2473-2481.DOI: 10.16085/j.issn.1000-6613.2017-1829

• 化工过程与装备 • 上一篇    下一篇

油气管道水合物堵塞机理研究进展

宋光春1, 李玉星1, 王武昌1, 姜凯1, 施政灼1, 姚淑鹏1, 魏丁2   

  1. 1 中国石油大学(华东)山东省油气储运安全省级重点实验室, 山东 青岛 266580;
    2 泰能天然气有限公司, 山东 青岛 266580
  • 收稿日期:2017-09-01 修回日期:2017-10-30 出版日期:2018-07-05 发布日期:2018-07-05
  • 通讯作者: 李玉星,教授,博士生导师,研究方向为油气储运工程。
  • 作者简介:宋光春(1992-),男,博士研究生,研究方向为深水流动安全保障技术。
  • 基金资助:
    山东省自然科学基金(ZR2017MEE057)、中央高校基本科研业务费专项资金(14CX02207A,17CX06017,17CX05006)及中国石油大学(华东)研究生创新工程(YCX2017062)项目。

Review of hydrate plugging mechanisms in oil and gas transport pipelines

SONG Guangchun1, LI Yuxing1, WANG Wuchang1, JIANG Kai1, SHI Zhengzhuo1, YAO Shupeng1, WEI Ding2   

  1. 1 Shandong Key Laboratory of Oil-Gas Storage and Transportation Safety, China University of Petroleum(East China), Qingdao 266580, Shandong, China;
    2 Taineng Natural Gas Limited Company, Qingdao 266580, Shandong, China
  • Received:2017-09-01 Revised:2017-10-30 Online:2018-07-05 Published:2018-07-05

摘要: 国内外对油气管道水合物堵塞机理的实验研究虽然较多,但一直缺少系统的总结归纳。本文根据水合物堵塞实验开展条件的不同,首先将油气管输体系分为油基体系、水基体系(纯水体系及水主导体系)、气主导体系和部分分散体系。文章分析表明,管道水合物堵塞机理众多,具体包括水合物的聚集和沉积、水合物大量聚集阻塞管道流通截面及油水相分离等。其中,水合物的聚集和沉积是油基体系水合物堵塞的主要机理,水合物颗粒的着床沉积是纯水体系水合物堵塞的主要机理,水合物大量聚集阻塞管道流通截面则是气主导体系水合物堵塞的主要机理。水主导体系和部分分散体系的水合物堵塞机理,目前尚无统一定论,有待进一步深入研究。文章指出对环状流液滴分布、油水分散状态、乳状液稳定性及未乳化自由水层等的量化研究则是未来水合物堵塞机理的研究重点。

关键词: 油气管道, 水合物, 堵塞机理, 油基体系, 水基体系, 气主导体系, 部分分散体系

Abstract: Although many experimental studies were conducted on oil-gas transportation pipeline hydrate plugging mechanisms worldwide, there has always been a lack of systematic summary. According to the difference in experimental conditions, oil-gas transportation systems were firstly divided into oil-dominated systems, water-dominated systems(water systems and water-continuous systems), gas-dominated systems and partially-dispersed systems. Analyses show that there are many pipeline hydrate plugging mechanisms, including hydrate agglomeration and deposition, hydrate jamming and the separation of oil and water. For oil-dominated systems, hydrate agglomeration/jamming and hydrate deposition(film growth, wall adhesion and bedding) are the main plugging mechanisms. For water systems, hydrate particle bedding is the dominant plugging mechanism. For gas-dominated systems, hydrate agglomeration and stenosis caused by hydrate jamming are the main plugging mechanism. As for the main plugging mechanisms in water-continuous systems and partially-dispersed systems, there is no definite conclusion can be drawn and much work is still needed.Quantitative researches on droplet size distribution in annular flow, oil-water dispersion state, emulsion stability and non-emulsified free water are the focuses of hydrate plugging mechanism research in the future.

Key words: oil and gas transmission pipeline, hydrate, plugging mechanism, oil-dominated systems, water-dominated systems, gas-dominated systems, partially-dispersed systems

中图分类号: 

京ICP备12046843号-2;京公网安备 11010102001994号
版权所有 © 《化工进展》编辑部
地址:北京市东城区青年湖南街13号 邮编:100011
电子信箱:hgjz@cip.com.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn