硅含量对氯甲烷制取低碳烯烃的SAPO-34分子筛酸性的影响

doi:10.16085/j.issn.1000-6613.2015.02.018

化工进展 ›› 2015, Vol. 34 ›› Issue (02): 413-418.DOI: 10.16085/j.issn.1000-6613.2015.02.018

硅含量对氯甲烷制取低碳烯烃的SAPO-34分子筛酸性的影响

孔令涛, 沈本贤, 蒋章

华东理工大学化学工程联合国家重点实验室, 上海 200237

收稿日期:2014-07-14 修回日期:2014-09-15 出版日期:2015-02-05 发布日期:2015-02-05
通讯作者: 沈本贤,教授,研究方向为石油炼制与化工。E-mail:sbx@ecust.edu.cn
作者简介:孔令涛(1987-),男,博士研究生,研究方向为无机合成与催化反应

Synthesis of SAPO-34 catalyst with different silicon contents and their catalytic performance in chloromethane to olefins

KONG Lingtao, SHEN Benxian, JIANG Zhang

State Key Laboratory of Chemical Engineering, East China University of Science & Technology, Shanghai 200237, China

Received:2014-07-14 Revised:2014-09-15 Online:2015-02-05 Published:2015-02-05

摘要/Abstract

摘要： 以三乙胺-四乙基氢氧化铵为复合模板剂,合成了不同硅含量的SAPO-34分子筛,并采用XRD、NH₃-TPD、以及²⁹Si MASNMR等方法对其进行了表征,最后考察了不同硅含量SAPO-34分子筛催化转化氯甲烷制取乙烯、丙烯的反应性能。结果表明:硅铝比在0.10~0.80时,均能合成规整的SAPO-34立方晶粒;硅铝比低于0.05或高于1.00时,易伴随形成片状和无定形晶相。当硅铝比为0.6时,SAPO-34的结晶度最大,微孔比表面积为588m²/g,微孔体积为0.267cm³/g。硅铝比从0.05到0.60逐渐增大时,SAPO-34酸强度和酸数目明显增多,继续增大硅铝比,酸强度增强,弱酸数目减少。在T=425℃、氯甲烷WHSV=2.73h^-1时,对所合成SAPO-34分子筛催化氯甲烷的反应性能进行了评价,随硅铝比增大,SAPO-34的酸性增强,氯甲烷的初始转化率逐渐升高,然而二次反应加剧致使乙烯丙烯选择性略有下降。

关键词: 硅含量, SAPO-34, 酸性质, 氯甲烷, 低碳烯烃

Abstract: SAPO-34 molecular sieves with different Si contents were synthesized and used as catalysts for conversion of chloromethane to light olefins. The influences of different Si amounts on crystalline structures,morphology features,textural properties and acidity of SAPO-34 samples were characterized with XRD,NH₃-TPD,and ²⁹Si MASNMR. Uniform SAPO-34 cubic crystals could be formed when ratio of Si/Al was in the range of 0.10-0.80. When ratio of Si/Al was 0.6,relative crystallinity of SAPO-34 sample was the highest,microporous specific surface area was 588m²/g,and microporous volume was 0.267cm³/g. NH₃-TPD results showed that when ratio of Si/Al was gradually increasing from 0.05 to 0.60,acid strength and acid amount were obviously enhanced,and acid strength was increasd with decreasing weak acid amounts when ratios of Si/Al was increased from 0.60 to 1.0. When conversion of chloromethane to light olefins was performed over SAPO-34 catalysts at 425℃,activity and stability of SAPO-34 catalysts were gradually improved with increasing ratio of Si/Al while selectivities of propene and ethene were slightly decreasing due to aggravated secondary reactions.

Key words: silicon content, SAPO-34, acidity, chloromethane, light olefins

中图分类号:

TQ426.94

孔令涛, 沈本贤, 蒋章. 硅含量对氯甲烷制取低碳烯烃的SAPO-34分子筛酸性的影响[J]. 化工进展, 2015, 34(02): 413-418.

KONG Lingtao, SHEN Benxian, JIANG Zhang. Synthesis of SAPO-34 catalyst with different silicon contents and their catalytic performance in chloromethane to olefins[J]. Chemical Industry and Engineering Progree, 2015, 34(02): 413-418.

参考文献

[1] Alvarez-Galvan M C,Mota N,Ojeda M,et al. Direct methane conversion routes to chemicals and fuels[J]. Catal. Today,2011,171:15-23.
[2] Elvira P,Michael S,Markus H,et al. Modified lanthanum catalysts for oxidative chlorination of methane[J]. Top. Catal.,2009,52:1220-1231.
[3] Patrick G,Michel P. Complete oxidation of methane at low temperature over noble metal based catalysts:A review[J]. Appl. Catal. B:Environ.,2002,39:1-37
[4] 应卫勇,曹发海,房鼎业. 碳一化工主要产品生产技术[M]. 北京:化学工业出版社,2004.
[5] George A O,Balaram G,Morteza F,et al. Selective monohalogenation of methane over supported acid or platinum metal catalysts and hydrolysis of methyl halides over γ-alumina-supported metal oxide/hydroxide catalysts:A feasible path for the oxidative conversion of methane into methyl alcohol/dimethyl ether[J]. J. Am. Chem. Soc.,1985,107:7097-7105.
[6] Stian S,Sharmala A,Morten B,et al. The methyl halide to hydrocarbon reaction over H-SAPO-34[J]. Journal of Catalysis,2006,241:243-254.
[7] Zhang D Z,Wei Y X,Xu L,et al. Chloromethane conversion to higher hydrocarbons over zeolites and SAPOs[J]. Catal. Lett.,2006,109:97-101
[8] 张大治,魏迎旭,沈江汉,等. 氯甲烷在镁修饰的ZSM-5分子筛催化剂上催化转化研究[J]. 天然气化工,2006,31:14-18．
[9] 张大治. 分子筛催化转化氯甲烷制取低碳烯烃及其反应机理的研究[D]. 大连:中国科学院大连化学物理研究所,2006．
[10] 叶丽萍,胡浩,曹发海,等. SAPO-34分子筛的合成及其对甲醇制低碳烯烃反应的催化性能[J]. 华东理工大学学报:自然科学版,2010,36(1):6-13．
[11] Unni O,Ole Vaaland S,Naresh B M,et al. Methane conversion to light olefins-How does the methyl halide route differ from the methanol to olefins (MTO) route?[J]. Catal. Today,2011,171:211-220.
[12] Wei Y X,Zhang D Z,Xu L,et al. Synthesis,characterization and catalytic performance of metal-incorporated SAPO-34 for chloromethane transformation to light olefins[J]. Catal. Today,2008,131:262-269.
[13] Zhang D Z,Zhang D Z,Xu L,et al. Highly efficient catalytic conversion of chloromethane to light olefins over HSAPO-34 as studied by catalytic testing and in situ FTIR[J]. J. Catal.,2006,238:46-57.
[14] Xu L,Du A P,Wei Y X,et al. Synthesis of SAPO-34 with only Si(4Al) species:Effect of Si contents on Si incorporation mechanism and Si coordination environment of SAPO-34[J]. Micropor. Mesopor. Mat.,2008,115:332-337.
[15] Wang P F,Lv A P,Hu J,et al. The synthesis of SAPO-34 with mixed template and its catalytic performance for methanol to olefins reaction[J]. Micropor. Mesopor. Mat.,2012,152:178-184.
[16] Sung H J,Jong-San C,Young K H. Crystal morphology control of AFI type molecular sieves with microwave irradiation[J]. J. Mater. Chem.,2004,14:280-285.
[17] Tan J,Liu Z M,Bao X H,et al. Crystallization and Si incorporation mechanisms of SAPO-34[J]. Micropor. Mesopor. Mat.,2002,53:97-108.
[18] Barthomeuf D. Topological model for the compared acidity of SAPOs and SiAl zeolites[J]. Zeolites,1994,14:394-401.
[19] Qi G Z,Xie Z K,Yang W M,et al. Behaviors of coke deposition on SAPO-34 catalyst during methanol conversion to light olefins[J]. Fuel Process Technol.,2007,88:437-441.
[20] Nilsen M H,Svelle S,Aravinthan S,et al. The conversion of chloromethane to light olefins over SAPO-34:The influence of dichloromethane addition[J]. Appl. Catal. A:Gen.,2009,367:23-31.
[21] James F H,Song W G,David M M,et al. The mechanism of methanol to hydrocarbon catalysis[J]. ACC. Chem. Res.,2003,36:317-326.
[22] Samia I,Aditya B. Mechanism of the catalytic conversion of methanol to hydrocarbons[J]. ACS Catal.,2013,3:18-31.

硅含量对氯甲烷制取低碳烯烃的SAPO-34分子筛酸性的影响

Synthesis of SAPO-34 catalyst with different silicon contents and their catalytic performance in chloromethane to olefins

PDF (PC)

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	刘美佳, 王刚, 张忠东, 何盛宝, 高金森. 石蜡基原油直接催化裂解制低碳烯烃新型炼化工艺的开发[J]. 化工进展, 2023, 42(10): 5191-5199.
[2]	胡文德, 王仰东, 王传明. 合成气直接催化转化制低碳烯烃研究进展[J]. 化工进展, 2022, 41(9): 4754-4766.
[3]	张鹏, 孟凡会, 杨贵楠, 李忠. 金属氧化物在OX-ZEO催化剂中催化CO _x 加氢制低碳烯烃研究进展[J]. 化工进展, 2022, 41(8): 4159-4172.
[4]	毕文菲, 代成义, 李雪梅, 贺建勋, 赵彬然, 马晓迅. 等离子体与Cu-Pd/S-1催化剂协同催化甲烷转化制低碳烯烃[J]. 化工进展, 2022, 41(1): 227-236.
[5]	安怀清, 周吉彬, 张今令, 张涛, 叶茂, 刘中民. 再生时间对甲醇制烯烃催化剂水蒸气再生过程的影响[J]. 化工进展, 2022, 41(1): 221-226.
[6]	孔维杰, 杨春亮, 卜婷婷, 周金波. 碳基硼基催化体系丙烷氧化脱氢催化剂的研究进展[J]. 化工进展, 2021, 40(S1): 223-230.
[7]	刘义涛, 朱明辉, 杨子旭, 孟博, 涂维峰, 韩一帆. 煤制化学品：合成气直接制低碳烯烃催化剂研究进展[J]. 化工进展, 2021, 40(2): 594-604.
[8]	陈静宇,张建红,盛浩,吴大凯,高新华,马清祥,张建利,范素兵,赵天生. CuZnTiO₂/SAPO-34双功能催化剂的设计、制备及其用于CO₂加氢制烯烃性能[J]. 化工进展, 2020, 39(2): 567-576.
[9]	代成义, 陈中顺, 杜康, 赵潇, 时一鸣, 陈星月, 刘丹, 马晓迅. 甲醇制芳烃催化剂及相关工艺研究进展[J]. 化工进展, 2020, 39(12): 5029-5041.
[10]	李春利, 安乐, 李浩, 李彤, 齐颖, 程永辉. 生物滴滤床法降解二氯甲烷废气的因素影响特征[J]. 化工进展, 2020, 39(11): 4625-4631.
[11]	刘丹, 陈星月, 时一鸣, 代成义, 马晓迅. 甲醇制对二甲苯联产低碳烯烃改性ZSM-5催化剂在流化床中的反应性能[J]. 化工进展, 2020, 39(11): 4488-4496.
[12]	李琦,张强,赵慧莹,陈志,宋进喜,延卫. 纳米片Ga-MFI分子筛合成及其对航空燃油催化裂解反应中低碳烯烃选择性的影响[J]. 化工进展, 2019, 38(9): 4075-4084.
[13]	王玲玉,韩文锋,刘化章,杨霞珍. 合成气制低碳烯烃铁催化剂活性相的研究进展[J]. 化工进展, 2019, 38(11): 4949-4955.
[14]	袁德林, 邢爱华, 繆平, 崔立山, 孙琦. 双模板剂法SAPO-34分子筛的合成及其MTO催化性能调变[J]. 化工进展, 2019, 38(05): 2353-2362.
[15]	马光远, 徐艳飞, 王捷, 王琼, 郑荣贵, 定明月. 合成气直接法制取低碳烯烃铁基催化体系研究进展[J]. 化工进展, 2018, 37(03): 992-1000.