1 |
MOORE G. Progress in digital integrated electronics[J]. IEEE Solid-State Circuits Society Newsletter, 1975, 11(3): 36-37.
|
2 |
HAO Xiaohong, PENG Bei, XIE Gongnan, et al. Efficient on-chip hotspot removal combined solution of thermoelectric cooler and mini-channel heat sink[J]. Applied Thermal Engineering, 2016, 100: 170-178.
|
3 |
SADIQUE H, MURTAZA Q, SAMSHER. Heat transfer augmentation in microchannel heat sink using secondary flows: A review[J]. International Journal of Heat and Mass Transfer, 2022, 194: 123063.
|
4 |
ROBINSON A J, SCHNITZLER E. An experimental investigation of free and submerged miniature liquid jet array impingement heat transfer[J]. Experimental Thermal and Fluid Science, 2007, 32(1): 1-13.
|
5 |
崔付龙, 詹可敬, 洪芳军. 射流-针肋微通道混合型蒸发器换热特性的实验研究[J]. 制冷技术, 2017, 37(4): 1-6.
|
|
CUI Fulong, ZHAN Kejing, HONG Fangjun. Experimental study on heat transfer performance of jet impingement-pin fin microchannel hybrid evaporator[J]. Chinese Journal of Refrigeration Technology, 2017, 37(4): 1-6.
|
6 |
VADER D T, CHRYSLER G M, CHU R C, et al. Experimental investigation of subcooled liquid nitrogen impingement cooling of a silicon chip[C]//Proceedings of 1995 IEEE/CPMT 11th Semiconductor Thermal Measurement and Management Symposium (SEMI-THERM). IEEE, 2002: 115-121.
|
7 |
SUNG M K, MUDAWAR I. CHF determination for high-heat flux phase change cooling system incorporating both micro-channel flow and jet impingement[J]. International Journal of Heat and Mass Transfer, 2009, 52(3/4): 610-619.
|
8 |
ZHOU D W, MA C F. Local jet impingement boiling heat transfer with R113[J]. Heat and Mass Transfer, 2004, 40(6): 539-549.
|
9 |
MEYER M T, MUDAWAR I, BOYACK C E, et al. Single-phase and two-phase cooling with an array of rectangular jets[J]. International Journal of Heat and Mass Transfer, 2006, 49(1/2): 17-29.
|
10 |
NDAO S, PELES Y, JENSEN M K. Experimental investigation of flow boiling heat transfer of jet impingement on smooth and micro structured surfaces[J]. International Journal of Heat and Mass Transfer, 2012, 55(19/20): 5093-5101.
|
11 |
崔付龙, 洪芳军, 林涛, 等. 烧结多孔表面分布式阵列射流沸腾[J]. 科学通报, 2020, 65(17): 1760-1769.
|
|
CUI Fulong, HONG Fangjun, LIN Tao, et al. Distributed jet array impingement boiling on particle sintered porous surfaces[J]. Chinese Science Bulletin, 2020, 65(17): 1760-1769.
|
12 |
ZHANG Yonghai, WEI Jinjia, KONG Xin, et al. Confined submerged jet impingement boiling of subcooled FC-72 over micro-pin-finned surfaces[J]. Heat Transfer Engineering, 2016, 37(3/4): 269-278.
|
13 |
PROTICH Z, SANTHANAM K S V, JAIKUMAR A, et al. Electrochemical deposition of copper in graphene quantum dot bath: Pool boiling enhancement[J]. Journal of the Electrochemical Society, 2016, 163(6): E166-E172.
|
14 |
张伟, 牛志愿, 李亚, 等. 石墨烯/镍复合微结构表面的池沸腾传热特性[J]. 化工进展, 2018, 37(10): 3759-3764.
|
|
ZHANG Wei, NIU Zhiyuan, LI Ya, et al. Pool boiling heat transfer characteristics on graphene/nickel composite microstructures[J]. Chemical Industry and Engineering Progress, 2018, 37(10): 3759-3764.
|
15 |
丁小龙, 胡振峰, 金国, 等. 电刷镀Ni-石墨烯复合镀层的组织结构及性能[J]. 材料工程, 2018, 46(11): 110-117.
|
|
DING Xiaolong, HU Zhenfeng, JIN Guo, et al. Microstructure and properties of electro-brush plating Ni-graphene composite coating[J]. Journal of Materials Engineering, 2018, 46(11): 110-117.
|
16 |
曾龙, 郑贵森, 邓大祥, 等. 多孔壁面微通道换热性能的实验研究[J]. 化工进展, 2022, 41(9): 4625-4634.
|
|
ZENG Long, ZHENG Guisen, DENG Daxiang, et al. Experimental study of heat transfer performance of porous wall microchannels[J]. Chemical Industry and Engineering Progress, 2022, 41(9): 4625-4634.
|
17 |
MOFFAT R J. Describing the uncertainties in experimental results[J]. Experimental Thermal and Fluid Science, 1988, 1(1): 3-17.
|
18 |
TZENG Sheng-Chung, MA Weiping. Experimental investigation of heat transfer in sintered porous heat sink[J]. International Communications in Heat and Mass Transfer, 2004, 31(6): 827-836.
|
19 |
YANG H, LEE F, CHEIN R. Microchannel heat sink fabrication with roughened bottom walls[J]. Microsystem Technologies, 2006, 12(8): 760-765.
|
20 |
KHANIKAR V, MUDAWAR I, FISHER T. Effects of carbon nanotube coating on flow boiling in a micro-channel[J]. International Journal of Heat and Mass Transfer, 2009, 52(15/16): 3805-3817.
|
21 |
LI J, CHENG P. Bubble cavitation in a microchannel[J]. International Journal of Heat and Mass Transfer, 2004, 47(12/13): 2689-2698.
|
22 |
ZHANG Wei, CHAI Yongzhi, XU Jinliang, et al. 3D heterogeneous wetting microchannel surfaces for boiling heat transfer enhancement[J]. Applied Surface Science, 2018, 457: 891-901.
|
23 |
张添, 闫凯芬, 张畅, 等. 肋化结构对两相受限式阵列射流冷却的影响[J].化工进展, 2019, 38(10): 4470-4480.
|
|
ZHANG Tian, YAN Kaifen, ZHANG Chang, et al. Effects of pin-finned array porous surface on two-phase confined jet-impingement cooling[J]. Chemical Industry and Engineering Progress, 2019, 38(10): 4470-4480.
|