Chemical Industry and Engineering Progress ›› 2021, Vol. 40 ›› Issue (8): 4187-4195.DOI: 10.16085/j.issn.1000-6613.2020-1864
• Chemical processes and equipment • Previous Articles Next Articles
ZHANG He1,2(), SHAO Guoqiang2(), SHI Hebang2, WU Changzi3, WU Hao3, CHEN Jingbo1(), LYU Pengpeng2()
Received:
2020-09-14
Online:
2021-08-12
Published:
2021-08-05
Contact:
CHEN Jingbo,LYU Pengpeng
张鹤1,2(), 邵国强2(), 史和邦2, 吴昌梓3, 吴昊3, 陈敬波1(), 吕鹏鹏2()
通讯作者:
陈敬波,吕鹏鹏
作者简介:
张鹤(1995—),男,硕士研究生,研究方向为流态化气相包覆新能源材料。E-mail:基金资助:
CLC Number:
ZHANG He, SHAO Guoqiang, SHI Hebang, WU Changzi, WU Hao, CHEN Jingbo, LYU Pengpeng. Key parameters of preparing flake alumina by molten salt method[J]. Chemical Industry and Engineering Progress, 2021, 40(8): 4187-4195.
张鹤, 邵国强, 史和邦, 吴昌梓, 吴昊, 陈敬波, 吕鹏鹏. 片状氧化铝的熔盐法制备关键参数[J]. 化工进展, 2021, 40(8): 4187-4195.
Add to citation manager EndNote|Ris|BibTeX
URL: https://hgjz.cip.com.cn/EN/10.16085/j.issn.1000-6613.2020-1864
试验 编号 | 熔盐比 (摩尔比) | Na3P3O9 质量分数/% | TiO2 质量分数/% | 煅烧温度 /℃ |
---|---|---|---|---|
A-1 | 4 | 3 | 1 | 1200 |
A-2 | 4 | 3 | 2 | 1200 |
A-3 | 4 | 3 | 3 | 1200 |
A-4 | 4 | 3 | 5 | 1200 |
B-1 | 4 | 1 | 2 | 1200 |
B-2 | 4 | 2 | 2 | 1200 |
B-3 | 4 | 3 | 2 | 1200 |
B-4 | 4 | 4 | 2 | 1200 |
C-1 | 4 | 3 | 2 | 900 |
C-2 | 4 | 3 | 2 | 1100 |
C-3 | 4 | 3 | 2 | 1200 |
C-4 | 4 | 3 | 2 | 1300 |
D-1 | 2 | 3 | 2 | 1200 |
D-2 | 3 | 3 | 2 | 1200 |
D-3 | 4 | 3 | 2 | 1200 |
D-4 | 5 | 3 | 2 | 1200 |
试验 编号 | 熔盐比 (摩尔比) | Na3P3O9 质量分数/% | TiO2 质量分数/% | 煅烧温度 /℃ |
---|---|---|---|---|
A-1 | 4 | 3 | 1 | 1200 |
A-2 | 4 | 3 | 2 | 1200 |
A-3 | 4 | 3 | 3 | 1200 |
A-4 | 4 | 3 | 5 | 1200 |
B-1 | 4 | 1 | 2 | 1200 |
B-2 | 4 | 2 | 2 | 1200 |
B-3 | 4 | 3 | 2 | 1200 |
B-4 | 4 | 4 | 2 | 1200 |
C-1 | 4 | 3 | 2 | 900 |
C-2 | 4 | 3 | 2 | 1100 |
C-3 | 4 | 3 | 2 | 1200 |
C-4 | 4 | 3 | 2 | 1300 |
D-1 | 2 | 3 | 2 | 1200 |
D-2 | 3 | 3 | 2 | 1200 |
D-3 | 4 | 3 | 2 | 1200 |
D-4 | 5 | 3 | 2 | 1200 |
1 | 孙敬会, 伊家飞, 卿培林, 等. 碳分法制备超细片状氧化铝粉体[J]. 人工晶体学报, 2019, 48(1): 122-126, 136. |
SUN Jinghui, YI Jiafei, QING Peilin, et al. Preparation of ultrafine flake aluminum oxide powder by carbonation[J]. Journal of Synthetic Crystals, 2019, 48(1): 122-126, 136. | |
2 | GANGAR B V, NAGARAJAN K, KRISHNAN V R, et al. Preparation of alumina and alumina-ceria microspheres using an internal gelation process and their characterization[J]. Transactions of the Indian Ceramic Society, 2012, 71(2): 101-109. |
3 | 李超, 刘红宇. 用于导热填料的片状氧化铝的制备[J]. 硅酸盐通报, 2020, 39(7): 2286-2290, 2307. |
LI Chao, LIU Hongyu. Preparation of flaky alumina for heat conducting filler[J]. Bulletin of the Chinese Ceramic Society, 2020, 39(7): 2286-2290, 2307. | |
4 | 王玲, 王千瑞, 刘冲, 等. 片状氧化铝的发展历程与应用前景[J]. 陶瓷学报, 2016, 37(6): 608-612. |
WANG Ling, WANG Qianrui, LIU Chong, et al. Development process and application prospect of flaky aluminum oxide[J]. Journal of Ceramics, 2016, 37(6): 608-612. | |
5 | 刘小杰, 黄婉霞, 张月, 等. 珠光颜料的最新研究进展[J]. 材料导报, 2008, 22(S2): 280-282. |
LIU Xiaojie, HUANG Wanxia, ZHANG Yue, et al. New research developments of pearlescent pigments[J]. Materials Review, 2008, 22(S2): 280-282. | |
6 | FUKUDA T, SHIDO R. Flake-like alpha-alumina particles and method for producing the same: EP1148028[P]. 2004-04-14. |
7 | 王梦迪, 罗瑾, 周靖辉, 等. 微反应器水热法耦合制备纳米片状氧化铝[J]. 无机盐工业, 2021, 53(3): 87-92. |
WANG Mengdi, LUO Jin, ZHOU Jinghui, et al. Microreactor-hydrothermal coupling preparation of nano-flaky alumina[J]. Inorganic Chemicals Industry, 2021, 53(3): 87-92. | |
8 | YASUO S, KIICHI O, TAKESHI F. Verfahren zur herstellung feiner plättchenförmiger partikel sowie plastische werkstoffe basierend auf aluminiumoxid: DE69208753T2[P]. 1996-04-11. |
9 | CHO S B, VENIGALLA S, ADAIR J H. Morphological forms of α-alumina particles synthesized in 1,4-butanediol solution[J]. Journal of the American Ceramic Society, 1966, 79: 88-96. |
10 | 苏界. 新型片状Al2O3材料的可控制备及其在新一代珠光颜料中的应用研究[D]. 武汉: 湖北大学, 2017. |
SU Jie. Controllable preparation of a new flake alumina materials and its application in the new generation of pearlescent pigment[D]. Wuhan: Hubei University, 2017. | |
11 | 赵燕禹, 胡兴兰, 张志鸿, 等. 高温固相法制备片状氧化铝及表征[J]. 无机盐工业, 2014, 46(4): 46-48. |
ZHAO Yanyu, HU Xinglan, ZHANG Zhihong, et al. Preparation and characterization of flaky alumina by high temperature solid phase method[J]. Inorganic Chemicals Industry, 2014, 46(4): 46-48. | |
12 | KEBBEDE A, PARAI J, CARIM A H. Anisotropic grain growth in α-Al2O3 with SiO2 and TiO2 additions[J]. Journal of the American Ceramic Society, 2004, 83(11): 2845-2851. |
13 | SONG Huesup, COBLE R L. Origin and growth kinetics of platelike abnormal grains in liquid‐phase‐sintered alumina[J]. Journal of the American Ceramic Society, 1990, 73(7): 2077-2085. |
14 | 潘志东, 范玉涛, 胡程, 等. 机械法制备无机纳米粉体[J]. 中国粉体技术, 2010, 16(2): 45-48. |
PAN Zhidong, FAN Yutao, HU Cheng, et al. Mechanical preparation of nano-sized powder of inorganic materials[J]. China Powder Science and Technology, 2010, 16(2): 45-48. | |
15 | 曹茂盛. 超微颗粒制备科学与技术[M]. 哈尔滨: 哈尔滨工业大学出版社, 1995. |
CAO Maosheng. Ultrafine particle preparation science and technology[M]. Harbin: Harbin Institute of Technology Press, 1995. | |
16 | 胡程, 王燕民. 机械法制备超细氧化铝粉体及其在ZTA陶瓷上的应用[J]. 硅酸盐学报, 2009, 37(10): 1628-1633. |
HU Cheng, WANG Yanmin. Mechanical preparation of ultra-fine powder of alumina and its application in ZTA ceramic[J]. Journal of the Chinese Ceramic Society, 2009, 37(10): 1628-1633. | |
17 | 刘学文, 郑经堂, 李长海, 等. 氧化铝粉体湿法球磨参数优化[J]. 硅酸盐通报, 2013, 32(5): 777-781. |
LIU Xuewen, ZHENG Jingtang, LI Changhai, et al. Optimization on wet ball milling conditions for alumina powder[J]. Bulletin of the Chinese Ceramic Society, 2013, 32(5): 777-781. | |
18 | 李悦, 叶红齐, 刘辉. 溶胶-凝胶涂膜法制备片状TiO2的研究[J]. 上海涂料, 2007(1): 13-17. |
LI Yue, YE Hongqi, LIU Hui. Preparation of flake TiO2 by sol-gel method[J]. Shanghai Coatings, 2007(1): 13-17. | |
19 | 王喜娜, 敬承斌, 刘爱云, 等. 溶胶-凝胶法制备氧化铝涂层的镀膜新工艺研究[J]. 硅酸盐通报, 2004(2): 14-16. |
WANG Xina, JING Chengbin, LIU Aiyun, et al. A new coating technique used for preparation of sol-gel alumina films[J]. Bulletin of the Chinese Ceramic Society, 2004(2): 14-16. | |
20 | SAEGUSA K. A method for producing a flaky material: EP0236952A2[P]. 1987-04-03. |
21 | YOON Ki Hyun, Yong Soo CHO, KANG Dong Heon. Molten salt synthesis of lead-based relaxors[J]. Journal of Materials Science, 1998, 33(12): 2977-2984. |
22 | HASHIMOTO S, YAMAGUCHI A. Synthesis of α-Al2O3 platelets using sodium sulfate flux[J]. Journal of Materials Research, 1999, 14(12): 4667-4672. |
23 | 龙翔, 陈雯, 叶红齐. 熔盐法制备珠光颜料用片状氧化铝[J]. 粉末冶金材料科学与工程, 2011, 16(1): 73-79. |
LONG Xiang, CHEN Wen, YE Hongqi. Preparation of lamellar aluminium oxide through molten salt synthesis[J]. Materials Science and Engineering of Powder Metallurgy, 2011, 16(1): 73-79. | |
24 | 张集发, 程小苏, 曾令可. 用于珠光颜料的片状氧化铝制备[J]. 中国陶瓷工业, 2014, 21(6): 1-5. |
ZHANG Jifa, CHENG Xiaosu, ZENG Lingke. Preparation of flaky aluminum oxide for pearlescent pigment[J]. China Ceramic Industry, 2014, 21(6): 1-5. | |
25 | 杨鹰, 苏周, 刘辉, 等. 片状氧化铝粉体的熔盐法合成[J]. 过程工程学报, 2004, 4(S1): 279-283. |
YANG Ying, SU Zhou, LIU Hui, et al. Preparation of flaky alumina powder by molten salt synthesis method[J]. The Chinese Journal of Process Engineering, 2004, 4(S1): 279-283. | |
26 | 苏周. 熔盐法合成片状氧化铝粉体的研究[D]. 长沙: 中南大学, 2004. |
SU Zhou. Preparation of flaky alumina powder by molten salt synthesis method[D]. Changsha: Central South University, 2004. | |
27 | 于闽. 新型片状氧化铝材料的合成及在珠光颜料中的应用[D]. 上海: 复旦大学, 2010. |
YU Min. Preparation of novel flaky alumina and its application in pearlescent pigment[D]. Shanghai: Fudan University, 2010. | |
28 | ZHONG Weizhuo, TANG Dingyuan. Growth units and morphology of lithium triborate (LBO) crystals[J]. Journal of Crystal Growth, 1996, 166(1/2/3/4): 91-98. |
29 | 王步国, 田明原. 水热条件下直接制备的α-Al2O3微晶的形态特征[J]. 科学通报, 1997, 42(24): 2663-2667. |
WANG Buguo, TIAN Mingyuan. Morphological characteristics of α-Al2O3 crystallites directly prepared under hydrothermal conditions[J]. Chinese Science Bulletin, 1997, 42(24): 2663-2667. | |
30 | 袁晰, 叶红齐, 刘辉, 等. 珠光颜料用片状氧化铁的助熔剂法合成研究[J]. 涂料工业, 2009, 39(8): 34-37. |
YUAN Xi, YE Hongqi, LIU Hui, et al. Preparation of flake iron oxide pearlescent pigment by flux salt process[J]. Paint &Coatings Industry, 2009, 39(8): 34-37. | |
31 | HSIANG Hsing-I, CHUANG Chia Che, CHEN Tsung Hao, et al. Ti4+ addition effect on α-Al2O3 flakes synthesis using a mixture of boehmite and potassium sulfate[J]. Ceramics International, 2010, 36(4): 1467-1472. |
32 | 阚艳梅, 王佩玲, 李永祥, 等. 工艺参数对熔盐法制备钛酸铋粉体影响的研究[J]. 无机材料学报, 2002(5): 1063-1067. |
KAN Yanmei, WANG Peiling, LI Yongxiang, et al. Influences of processing parameters on Bi4Ti3O12 powder prepared by molten salt methods[J]. Journal of Inorganic Materials, 2002(5): 1063-1067. | |
33 | 于海洋, 隋万美, 翟会深, 等. 熔盐法二氧化钛针状晶的制备及表征[J]. 青岛大学学报(自然科学版), 2006(3): 44-47. |
YU Haiyang, Wanmei SUI, ZHAI Huishen, et al. Characterization of salt flux method prepared titania needle-like crystals[J]. Journal of Qingdao University: Natural Science Edition, 2006(3): 44-47. | |
34 | 仲维卓, 华素坤. 晶体生长形态学[M]. 北京: 科学出版社, 1999: 208. |
ZHONG Weizhuo, HUA Sukun. Crystal growth morphology[M]. Beijing: Science Press, 1999: 208. | |
35 | 张倩影, 朱丽慧, 刘伟, 等. 添加剂在熔盐法合成片状α-Al2O3中的作用[J]. 材料研究学报, 2008, 22(2): 205-208. |
ZHANG Qianying, ZHU Lihui, LIU Wei, et al. Influence of additives on the morphology control α-Al2O3 platelets synthesized in molten salt[J]. Chinese Journal of Materials Research, 2008, 22(2): 205-208. | |
36 | 王玲. 片状氧化铝制备与形成机理研究[D]. 武汉: 湖北工业大学, 2017. |
WANG Ling. The preparation and formation mechanism of flaky alumina[D]. Wuhan: Hubei University of Technology, 2017. |
[1] | XIANG Shuo, LU Peng, SHI Weinian, YANG Xin, HE Yan, ZHU Liye, KONG Xiangwei. Controllable and large-scale preparation of two-dimensional WS2 nanosheet and its tribological properties as lubricant additives in lithium grease [J]. Chemical Industry and Engineering Progress, 2023, 42(9): 4783-4790. |
[2] | YANG Kailu, CHEN Mingxing, WANG Xinya, ZHANG Wei, XIAO Changfa. Research progress of preparation and modification of nanofiltration membrane for dye wastewater treatment [J]. Chemical Industry and Engineering Progress, 2023, 42(10): 5470-5486. |
[3] | QIN Jian, LIU Tianxia, WANG Jian, LU Xing. Preparation and tribological properties of oleic acid modified graphene/molybdenum disulfide composite lubricating additives [J]. Chemical Industry and Engineering Progress, 2022, 41(9): 4973-4985. |
[4] | ZHANG Saihui, LI Xiaoyang, GAO Hui, WANG Lili. Recent progress in additives in interfacial polymerization for the preparation of polyamide composite membrane [J]. Chemical Industry and Engineering Progress, 2022, 41(9): 4884-4894. |
[5] | LI Yeqing, YANG Xingru, LIANG Zhuo, JIANG Hao, XU Quan, ZHOU Hongjun, FENG Lu. Impact of exogenous additives on hydrothermal dechlorination performance of polyvinyl chloride [J]. Chemical Industry and Engineering Progress, 2022, 41(5): 2706-2712. |
[6] | FANG Yufei, DING Donghai, XIAO Guoqing, FU Pengcheng, ZHONG Xiaochuan, ZHU Xianfeng. Progress in academic and application researches on ceramic proppant [J]. Chemical Industry and Engineering Progress, 2022, 41(5): 2511-2525. |
[7] | YANG Lining, ZHENG Donghao, WANG Lixin, YANG Guang. Bionic design and additive manufacturing of continuous carbon fiber reinforced resin matrix composites with dragonfly wing venation structure [J]. Chemical Industry and Engineering Progress, 2022, 41(11): 5961-5967. |
[8] | HU Huakun, XUE Wendong, JIANG Peng, LI Yong. Research progress of safety additives for lithium ion batteries [J]. Chemical Industry and Engineering Progress, 2022, 41(10): 5441-5455. |
[9] | LYU Penggang, LIU Tao, YE Hang, HUANG Xiaoliang, DUAN Hongchang, TAN Zhengguo. Advances in improving the performance of additives for increasing propylene production in FCC process [J]. Chemical Industry and Engineering Progress, 2022, 41(1): 210-220. |
[10] | SU Weiyi, LIU Xing, HAO Qi, GUO Pan, HAO Hongxun, LI Chunli. Research progress in the effect of additives on the polymorphic crystallization of amino acids in solution [J]. Chemical Industry and Engineering Progress, 2021, 40(8): 4463-4472. |
[11] | PAN Yi, XU Minglei, HOU Bing, GUO Qi, YANG Shuangchun, KANTOMA Daniel Bala. Research progress of temperature-sensitive polymer in oil and gas production [J]. Chemical Industry and Engineering Progress, 2021, 40(4): 2109-2119. |
[12] | WANG Xiaoda, CHEN Yu, WANG Qinglian, HUANG Zhixian, YANG Chen, WANG Hongxing, QIU Ting. Review on etherification by reactive distillation [J]. Chemical Industry and Engineering Progress, 2021, 40(4): 1797-1811. |
[13] | YANG Lining, WANG Jinye, ZHANG Yongdi, CHANG Hongjie, YANG Guang. Performance of continuous carbon fiber reinforced metal matrix composites formed by additive manufacturing [J]. Chemical Industry and Engineering Progress, 2021, 40(12): 6777-6784. |
[14] | SUN Yue, LIU Lingling, LI Xinquan, PAN Jianfeng, LIU Jiabin. Research progress in mechanisms and effects of various additives used for preparing electrolytic copper foils [J]. Chemical Industry and Engineering Progress, 2021, 40(11): 5861-5874. |
[15] | Yuehua LIU, Ju SHANGGUAN, Shoujun LIU, Song YANG, Wenguang DU. Nitrogen migration regarding the addition of iron-Ni composite additives during coal pyrolysis [J]. Chemical Industry and Engineering Progress, 2021, 40(1): 164-172. |
Viewed | ||||||
Full text |
|
|||||
Abstract |
|
|||||
京ICP备12046843号-2;京公网安备 11010102001994号 Copyright © Chemical Industry and Engineering Progress, All Rights Reserved. E-mail: hgjz@cip.com.cn Powered by Beijing Magtech Co. Ltd |