Chemical Industry and Engineering Progress ›› 2018, Vol. 37 ›› Issue (08): 3051-3055.DOI: 10.16085/j.issn.1000-6613.2017-1737

Previous Articles     Next Articles

Preparation of magnetic ion exchange resin and its adsorption performance to Cl-

ZHANG Yuling, LI Xudong, ZHANG Liping, WANG Qian, KANG Shaoxin   

  1. Department of Environmental Science and Engineering, North China Electric Power University, Baoding 071003, Hebei, China
  • Received:2017-08-17 Revised:2018-02-10 Online:2018-08-05 Published:2018-08-05

磁性离子交换树脂的制备及其对Cl吸附性能

张玉玲, 李旭东, 张利平, 王倩, 康少鑫   

  1. 华北电力大学环境科学与工程系, 河北 保定 071003
  • 通讯作者: 张玉玲(1977-),女,博士,副教授,研究方向为工业水处理技术及理论研究。
  • 作者简介:张玉玲(1977-),女,博士,副教授,研究方向为工业水处理技术及理论研究。E-mail:zhangyuling_hit@163.com。
  • 基金资助:
    国家十三五水专项子课题(2017ZX07101001-07)、河北省自然科学基金(E2016502097)及国家自然科学基金青年基金(51308211)项目。

Abstract: Magnetic ion exchange resin (MIER) was successfully prepared using styrene type strongly alkaline ion exchange resin as matrix and with the method of co-precipitation. The surface morphology, magnetic component and magnetic property of MIER were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD) and vibrating sample magnetometer (VSM). The effects of adsorption time, temperature, pH and competitive ions on the adsorption performance of MIER to Cl- in waste water were studied. The results showed that the MIER's surface was rough, the magnetic component was Fe3O4, and the saturation magnetization was about 2.23emu/g. Adsorption time, temperature and pH all had great influence on the adsorption performance. When the adsorption time was 3h, temperature was 30℃, and pH=3, the saturated adsorption capacity of MIER could reach 140.43mg/g. The anti-interference ability and the adsorption selectivity to Cl- were enhanced in the wastewater containing competing ions such as SO42- or NO3-.

Key words: magnetic ion exchange resin, preparation, wastewater, chloride, adsorption, selectivity

摘要: 采用共沉淀法,以苯乙烯型强碱性离子交换树脂为基体,成功制备了磁性离子交换树脂。分别采用扫描电子显微镜(SEM)、X射线衍射(XRD)和振动样品磁强计(VSM)对磁性离子交换树脂的表观形貌、磁性组分和磁性能进行了表征。研究了吸附时间、温度、pH和竞争离子4个因素对磁性离子交换树脂吸附废水中Cl性能的影响。结果表明:磁性离子交换树脂表面粗糙,磁性组分为Fe3O4,比饱和磁化强度为2.23emu/g,具有超顺磁性。吸附时间、温度和pH对磁性离子交换树脂吸附Cl的影响较大,当吸附时间为3h、温度为30℃、pH=3时,磁性离子交换树脂的吸附量最大,达到140.43mg/g;当废水中含有SO42–或NO3等竞争离子时,磁性离子交换树脂的抗干扰能力增强,对Cl的吸附选择性也有所提高。

关键词: 磁性离子交换树脂, 制备, 废水, 氯离子, 吸附, 选择性

CLC Number: 

京ICP备12046843号-2;京公网安备 11010102001994号
Copyright © Chemical Industry and Engineering Progress, All Rights Reserved.
E-mail: hgjz@cip.com.cn
Powered by Beijing Magtech Co. Ltd