Chemical Industry and Engineering Progress ›› 2017, Vol. 36 ›› Issue (06): 2197-2207.DOI: 10.16085/j.issn.1000-6613.2017.06.033
Previous Articles Next Articles
WANG Zhiqiang1,2, SUN Yuqing1, YU Xiaolong1, NI Jing1
Received:
2016-11-02
Revised:
2017-02-27
Online:
2017-06-05
Published:
2017-06-05
王志强1,2, 孙雨晴1, 余小龙1, 倪敬1
通讯作者:
倪敬
作者简介:
王志强(1984—),男,博士,讲师,主要从事海水液压元件及其关键零部件材料的研究。E-mail:wzq78452501@163.com。
基金资助:
CLC Number:
WANG Zhiqiang, SUN Yuqing, YU Xiaolong, NI Jing. Research progress and development prospect of the noise of milti-medium nanocomposites friction pairs[J]. Chemical Industry and Engineering Progress, 2017, 36(06): 2197-2207.
王志强, 孙雨晴, 余小龙, 倪敬. 多介质纳米复合材料摩擦副的噪声研究进展与展望[J]. 化工进展, 2017, 36(06): 2197-2207.
Add to citation manager EndNote|Ris|BibTeX
URL: https://hgjz.cip.com.cn/EN/10.16085/j.issn.1000-6613.2017.06.033
[1] 何龙,谭业发,屠义强,等. 铝合金表面纳米Al2O3-40%TiO2复相陶瓷层力学与摩擦学性能[J]. 机械工程学报,2013,49(2):79-86. HE L,TAN Y F,TU Y Q,et al. Mechanical and tribological properties of nanostructured Al2O3-40%TiO2 multiphase ceramic coatings on the surfaces of aluminum alloy[J]. Journal of Mechanicl Engineering,2013,49(2):79-86. [2] 张志丹,徐娟,孙克原,等. 聚醚醚酮复合材料耐磨性能的研究进展[J]. 玻璃钢/复合材料,2013(1):94-98. ZHANG Z D,XU J,SUN K Y,et al. Research development on the wear-resisting performance of PEEK composites[J]. Fiber Reinforced Plastics/Composites,2013(1):94-98. [3] 吕乐华,孙乐民,上官宝,等. 石墨含量对石墨/铜复合材料载流摩擦磨损性能的影响[J]. 润滑与密封,2013,38(1):24-27. LV L H,SUN L M,SHANGGUAN B,et al. Effects of graphite content on current carrying friction and wear behaviors of graphite/copper composites[J]. Lubrication Engineering,2013,38(1):24-27. [4] ZHOU H,LIU G. A model-based ultrasonic quantitative evaluation method for bonding quality of multi-layered material[J]. Measurement,2012,45(6):1414-1423. [5] KAZYS R J,MAZEIKA L,JASIUNIENE E. Ultrasonic fields radiated through matching layers with nonparallel boundaries[J]. Ultrasonics,2004,42(1-9):267-271. [6] KA?YS R,TUMŠYS O,PAGODINAS D. A new ultrasonic technique for detection and location of defects in three-layer plastic pipes with a reinforced internal layer[J]. Ultrasonics,2008,63(3):19-27. [7] KOLKOORI S R,RAHMAN M U,CHINTA P K,et al. Ultrasonic field profile evaluation in acoustically inhomogeneous anisotropicmaterials using 2D ray tracing model:numerical and experimental comparison[J]. Ultrasonics,2013,53:396-411. [8] 刘锐,胡铁华,靳倩倩,等. 超声波检测中的小波降噪[J]. 机电产品开发与创新,2015,28(1):4-6. LIU R,HU T H,JIN Q Q,et al. Wavelet de-noising in the ultrasonic detecting[J]. Development & Innovation of Machinery & Electrical Products,2015,28(1):4-6. [9] 邬冠华,吴伟,王铮,等. 小波变换对超声检查信号去噪效果的分析[J]. 无损检测,2007,29(1):20-23. WU G H,WU W,WANG Z. Analysis of denoising for ultrasonic testing dignal using wavelet[J]. Nondestructive Testing,2007,29(1):20-23. [10] LHÉMERY A,CALMON P,LECOEUR-TAÏBI I,et al. Modeling tools for ultrasonic inspection of welds[J]. NDT & E International,2000,33(7):499-513. [11] 孔涛,徐春广,张运涛,等. 空气耦合超声换能器声场计算与测量研究[J]. 机械工程学报,2011,47(22):19-24. KONG T,XU C G,ZHANG Y T,et al. Investigation of acoustic field calculation and measurement method for air-coupled ultrasonic transducer[J]. Journal of Mechanicl Engineering,2011,47(22):19-24. [12] HUANG R,SCHMERR L W,SEDOV A. Multi-gaussian beam modeling for multilayered anisotropic media. I:Modeling foundations[J]. Research in Nondestructive Evaluation,2007,18(4):193-220. [13] HYUNJO J. Time reversal study of ultrasonic waves for anisotropic solids using a Gaussian beam model[J]. NDT&E International,2009,42:210-214. [14] SCHMERR L W,LOPEZ A L,SEDOV A. K-space Prony's method for generating the basis functions of multi-Gaussian beam models[J]. Ultrasonics,2010,50(6):600-605. [15] SCHMERR L W,HUANG R,SEDOV A. The simulation of ultrasonic beams with a Gaussian beam equivalent point source model[J]. Chinese Journal of Acoustics,2010(2):97-106. [16] 韩鹏,王召巴,陈友兴. 多元高斯声束模型相控阵超声传感器声场仿真[J]. 传感器与微系统,2010,29(2):22-25. HAN P,WANG Z B,CHEN Y X. Simulation of sound fields of phased array ultrasonic sensor based on multi-Gaussian beam model[J]. Transducer and Microsystem Technologies,2010,29(2):22-25. [17] 李力,姜恺,曾德学. 基于多元高斯模型的超声声场仿真系统设计[J]. 三峡大学学报,2014,36(2):77-80. LI L,JIANG K,ZENG D X. Design of ultrasonic field simulation system based on multi-gaussian beam model[J]. Journal of China Three Gorges University(Natural Sciences),2014,36(2):77-80. [18] 段晓敏,赵新玉,孙华飞. 矩形表面波探头声场的高斯声束叠加法[J]. 物理学报,2014,63(1):1-6. DUAN X M,ZHAO X Y,SUN H F. Multi-Gaussian beam model for ultrasonic surface waves with angle beam rectangular transducers[J]. Acta Physica Sinica,2014,63(1):1-6. [19] 段琼,刘迎新,李荣喜. 反应性丙烯酸微凝胶的制备及其应用[J]. 涂料工业,2009,39(3):37-40. DUAN Q,LIU Y M,LI R X. Synthesis and application of reactive acrylate microgels[J]. Paint & Coatings Industry,2009,39(3):37-40. [20] 高静,李晓,张卫英,等. 透明多孔聚合物凝胶的微乳液合成研究[J]. 石油化工,2003,32(7):559-603. GAO J,LI X,ZHANG W Y,et al. Study on preparation of transparent microporous polymer gels from microemulsion polymerization[J]. Petrochemical Technology,2003,32(7):559-603. [21] 张得坤,葛世荣,沈艳秋. 聚乙烯醇/羟基磷灰石复合水凝胶的摩擦磨损机理研究[J]. 中国科学(技术科学),2009,39(4):713-719. ZHANG D K,GE S R,SHEN Y Q. Friction and wear characteristics of PVA/HA composite hydrogel[J]. Scientia Sinica(Technologica),2009,39(4):713-719. [22] 冯纪璐,齐军茹,翁静宜,等. 大豆 7S 球蛋白与葡聚糖共价键合纳米凝胶的制备与表征[J]. 化工学报,2016,67(9):4020-4026. FENG J L,QI J R,WENG J Y. et al. Preparation and characterization of soy β-conglycinin-dextran nanogels based on Maillard reaction[J]. CIESC Journal,2016,67(9):4020-4026. [23] 赵书彦,陈军君,刘福春,等. 纳米石墨/聚氨酯复合涂层的制备及耐腐蚀性能[J]. 复合材料学报,2016,33(9):1868-1878. ZHAO S Y,CHEN J J,LIU F C,et al. Preparation and anti-corrosion performances of nano-graphite/polyurethane composite coatings[J]. Acta Materiae Compositae Sinica,2016,33(9):1868-1878. [24] GUTSEV D,ANTONOV M,HUSSAINOVA I,et al. Effect of SiO2 and PTFE additives on dry sliding of NiP electroless coating[J]. Tribology International,2013,65:295-302. [25] ROSSI S,CHINI F,STRAFFELINI G,et al. Corrosion protection properties of electroless Nickely PTFE,Phosphatey MoS2 and Bronzey PTFE coatings applied to improve the wear resistance of carbon steel[J]. Surface and Coatings Technology,2003,173:235-242. [26] 解挺,杨华平,周正华,等. 聚合物/金属摩擦界面迁移过程的数值模拟[J]. 摩擦学学报,2014,34(2):140-145. XIE T,YANG H P,ZHOU Z H,et al. Numerical simulation of the transfer process at tribo-interface of polymer/metal[J]. Tribology,2014,34(2):140-145. [27] 胡彦伟,程珙,李浩然,等. 化学沉淀法制备纳米SiO2颗粒[J]. 化工学报,2016,67(s1):379-383. HU Y W,CHEN H,LI H R,et al. Synthesis of SiO2 nanoparticles by chemical precipitation[J]. CIESC Joural,2016,67(s1):379-383. [28] 陈岁元,刘义节,刘常升,等. 纳米Al2O3颗粒增强新型铜基自润滑复合材料[J]. 复合材料学报,2009,26(6):109-115. CHEN S Y,LIU Y J,LIU C S,et al. Nano-Al2O3 particle reinforced Cu-based self-lubricating composites[J]. Acta Materiae Compositae Sinica,2009,26(6):109-115. [29] LIEW K W,CHIA S Y,KOK C K,et al. Evaluation on tribological design coatings of Al203,Ni-P-PTFE and MoS2 on aluminium alloy 7075 under oil lubrication[J]. Materials & Design,2013,48(2):77-84. [30] 孙少明,徐成宇,任露泉,等. 轴流风机仿生叶片降噪试验研究及机理分析[J]. 吉林大学学报,2009,39(2):382-387. SUN S M,XU C Y,REN L Q,et al. Experimental research on noise reduction of bionic axial fan blade and mechanism analysis[J]. Journal of Jilin University (Enginee ring and Technology Edition),2009,39(2):382-387. [31] SHI L,ZHANG C C,WANG J,et al. Numerical simulation of the effect of bionic serrated structures on the aerodynamic noise of a circular cylinder[J]. Journal of Bionic Engineering,2012,9:91-98. [32] WANG Y H,ZHANG C C,REN L Q,et al. Sound absorption of a new bionic multi-layer absorber[J]. Composite Structures,2014,108:400-408. [33] 汪久根,陈仕洪. Koch雪花表面织构设计与高铁空气摩擦噪声分析[J]. 机械工程学报. 2014,50(7):78-83. WANG J G,CHEN S H. Bionic design of koch snowflake surface texture and its effects on air frictional noise of high speed train[J]. Journal of Mechanicl Engineering,2014,50(7):78-83. [34] 汪久根,陈仕洪,王庆九. 仿生菱形表面织构对高速列车摩擦噪声的影响[J]. 交通运输工程学报,2014,14(1):43-48. WANG J G,CHEN S H,WANG Q J. Effect of bionic rhombic surface texture on frictional noise of high-speed train[J]. Journal of Traffic and Transportation Engineering,2014,14(1):43-48. [35] 林世才,汪久根. 圆坑织构高速列车气固界面的摩擦噪声分析[J]. 交通运输工程学报,2012,12(3):53-59. LIN S C,WANG J G. Frictional noise analysis of gas-solid interface with circular dents for high-speed train[J]. Journal of Traffic and Transportation Engineering,2012,12(3):53-59. [36] 胡海豹,宋保维,潘光,等. 回转体表面条纹沟槽降噪水洞试验[J]. 火力与指挥控制,2008,33(2):139-141. HU H B,SONG B W,PAN G,et al. Water tunnel test study on noise reduction of revolving bodies with riblets surface[J]. Fire Control and Command Control,2008,33(2):139-141. [37] 潘光,黄明明,马骥. 脊状表面降噪特性研究[J]. 火力与指挥控制,2010,35(5):16-19. PAN G,HUANG M M,MA J,et al. On noise-reduction characteristic of ridge surface[J]. Fire Control and Command Control,2010,35(5):16-19. [38] 王正国,莫继良,王安宇,等. 沟槽型表面织构对界面摩擦振动噪声特性的研究[J]. 振动与冲击,2013,32(23):175-179. WANG Z G,MO J L,WANG A Y,et al. Effect of grooved surface texture on interface friction vibration and noise properties[J]. Journal of Vibration and Shock,2013,32(23):175-179. [39] 王东伟,莫继良,王正国,等. 沟槽织构化表面影响摩擦振动噪声机理[J]. 机械工程学报,2013,49(23):112-116. WANG D W,MO J L,WANG Z G,et al. Mechanism of the effect of groove-textured surface on the friction vibration and noise[J]. Journal of Mechanicl Engineering,2013,49(23):112-116. [40] 邓海顺,祁胜,于海武,等. 轴向柱塞泵配流副低压区织构化数值分析[J]. 农业机械学报. 2011,42(6):203-207. DENG H S,QI S,YU H W,et al. Numerical analysis for textured port plate of axial piston pump[J]. Transactions of the Chinese Society for Agricultural Machinery,2011,42(6):203-207. [41] 邓海顺,于海武,王晓雷. 轴向柱塞泵配流副低压区织构化试验研究[J]. 华中科技大学学报,2012,40(6):16-19. DENG H S,YU H W,WANG X L. Study on tribological performance of textured port plates of axial piston pumps[J]. Journal of Huazhong University of Science and Technology(Nature Science Edition),2012,40(6):16-19. [42] 姜婷,边新迎. 表面涂层对航行体的减阻降噪作用分析[J]. 水雷战与舰船防护,2010,18(4):42-45. JIANG T,BIAN X Y. Analysis on drag & noise reduction by surface coating of vehicles[J]. Mine Warfare & Ship Self-Defence,2010,18(4):42-45. [43] KOVALCHENKO A,AJAYI O,ERDEMIR A,et al. The effect of laser surface texturing on transitions in lubrication regimes during unidirectional sliding contact[J]. Tribology International,2005,38:219-225. [44] ASHWIN R,WASIM A,SURYA P M,et al. Friction characteristics of microtextured surfaces under mixed and hydrodynamic lubrication[J]. Tribology International,2013,57:170-176. [45] RAHMANI R,MIRZAEE I,SHIRVANI A,et al. An analytical approach for analysis and optimization of slider bearings with infinite width parallel textures[J]. Tribology International,2010,43(8):1551-1565. [46] SCHREC K S,GAHR K H Z. Laser-assisted structuring of ceramic and steel surfaces for improving tribological properties[J]. Applied Surface Science,2005,247:616-622. [47] ETSION I,SHER E. Improving fuel efficiency with laser surface textured piston rings[J]. Tribology Internatial,2009,42(4):542-547. [48] WANG X,KATO K,ADACHI K,et al. Loads carrying capacity map for the surface texture design of SiC thrust bearing sliding in water[J]. Tribology International,2003,36(3):189-197. [49] WANG X,ADACHI K,OTSUKA K,et al. Optimization of the surface texture for silicon carbide sliding in water[J]. Applied Surface Science,2006,253(3):1282-1286. [50] 赵帅,王晓雷. 高分子材料机械密封磨损特性及表面织构的影响[J]. 摩擦学学报,2015,35(6):761-767. ZHAO S,WANG X L. The effects of surface texture on the wear properties of mechanical seals made of metal and polymers[J]. Tribology,2015,35(6):761-767. [51] 禹营,汪家道,陈大融. 超疏水表面在减阻中的应用[J]. 哈尔滨工业大学学报,2006,38(s1):68-70. YU Y,WANG J D,CHEN D R. The application of ultra hydrophobic surface in drag reduction[J]. Journal of Harbin Institute of Technology,2006,38(s1):68-70. [52] 朱秀芳,王钧. 高分子涂层在水中减阻效果的研究[J]. 建材世界,2006,27(2):6-7. ZHU X F,WANG J. Polymer coating effect of drag reduction in water[J]. The World of Building Materials,2006,27(2):6-7. [53] 张旭,马骋,钱正芳,等. 船舶表面减阻降噪涂层技术研究[C]//船舶水下噪声学术讨论会论文集. 苏州:中国造船工程学会,2003:179-184. ZHANG X,MA C,QIAN Z F. Coating surface drag reduction noise reduction technology research of the ship[C]//Proceedings of marine underwater noise academic seminar. Suzhou:The Chinese Society of Naval Architects and Marine Engineers,2003:179-184. [54] 王庆军,陈庆民. 超疏水表面的制备技术及其应用[J]. 高分子材料科学与工程,2005,21(2):6-10. WANG Q J,CHEN Q M. Recent research advances in manufacturing super hydrophobic membrane and applications[J]. Polymer Materials Science and Engineering,2005,21(2):6-10. [55] 李涛,刘长松,张强,等. ZnO基超疏水表面的制备及其与水黏着性研究[J]. 中国科技论文在线,2009,2(22):1-7. LI T,LIU C S,ZHANG Q,et al. Fabrication of ZnO-based super hydrophobic surfaces and their water-adhesion properties[J]. Sciencepaper Online,2009,2(22):1-7. [56] 卢思,姚朝晖,郝鹏飞,等. 具有微纳结构超疏水表面的槽道减阻特性研究[J].中国科学(物理学力学天文学),2010,40(7):916-924. LU S,YAO Z H,HAO P F,et al. Drag reduction in turbulent flows over superhydrophobic surfaces with micro-nano textures[J]. Science China(Physics,Mechanics & Astronomy),2010,40(7):916-924. [57] WANG H B,CHEN E,JIA X B,et al. Superhydrophobic coatings fabricated with polytetrafluoroethylene and SiO2 nanoparticles by spraying process on carbon steel surfaces[J]. Applied Surface Science,2015,349:724-732. [58] 赵丹阳,郭纯方,田倩倩,等. 仿生鲨鱼皮减阻微沟槽滚压复制技术基础研究[C]//先进成型与材料加工技术国际研讨会论文集. 大连:中国机械工程学会,2014:95-99. ZHAO D Y,GUO C F,TIAN Q Q,et al. Basic research on roll-to-roll embossing of shark-skin-inspired drag-reduction Micro-riblets[C]//Proceedings of international conference on advanced molding and materials processing technology. Dalian:Chinese Mechanical Engineering Society,2014:95-99. [59] 曲冰,汪静,潘超,等. 仿鲨鱼皮表面微结构材料制备的研究[J]. 大连海洋大学学报,2011,26(2):173-175. QU B,WANG J,PAN C,et al. Preparation of shark skin surface micro-structure materials[J]. Journal of Dalian Ocean University,2011,26(2):173-175. [60] 张赫男,李翔,陈博,等. 仿鲨鱼体表结构的生物非光滑减阻表面制造[C]//中国机械工程学会年会. 重庆:中国机械工程学会,2005:1-5. ZHANG H N,LI X,CHEN B,et al. Imitation shark biological nonsmooth surface of drag reduction of surface structure[C]//The Chinese mechanical engineering society annual meeting. Chongqing:Chinese Mechanical Engineering Society,2005:1-5. [61] 韩鑫,张德远. 鲨鱼皮微电铸复制工艺研究[J]. 农业机械学报,2011,42(2):229-234. HAN X,ZHANG D Y. Replication of shark skin based on micro-electroforming[J]. Transactions of The Chinese Society of Agricultural Machinery,2011,26(2):229-234. [62] 赵丹阳,李涛,王敏杰,等. 仿鲨鱼皮微沟槽结构疏水机理实验研究[J]. 大连理工大学学报,2013,53(4):503-507. ZHAO D Y,LI T,WANG M J,et al. Experimental study of hydrophobic mechanism of micro-riblets on imitative shark skin[J]. Journal of Dalian University of Technology,2013,53(4):503-507. [63] 孙少明,任露泉,徐成宇. 长耳鹗皮肤和覆羽耦合吸声降噪特性研究[J]. 噪声与振动控制,2008,28(3):119-123. SUN S M,REN L Q,XUN C Y. Research on coupling sound absorption property of owl skin and feather[J]. Noise and Vibration Control,2008,28(3):119-123. [64] 吴少华. 仿猫头鹰柔性微纳米降噪与能量收集器件研究[D]. 北京:中国科学院大学,2014. WU S H. Study on flexible micro nano noise reduction and energy harvesting device based on the imitation of owl[D]. Beijing:University of Chinese Academy of Sciences,2014. [65] 陈坤,刘庆平,廖庚华,等. 利用雕鸮羽毛的消音特性降低小型轴流风机的气动噪声[J]. 吉林大学学报,2012,42(1):79-84. CHEN K,LIU Q P,LIAO G H,et al. Aerodynamic noise reduction of small axial fan using hush characteristics of eagle owl feather[J]. Journal of Jilin University,2012,42(1):79-84. |
[1] | ZHANG Mingyan, LIU Yan, ZHANG Xueting, LIU Yake, LI Congju, ZHANG Xiuling. Research progress of non-noble metal bifunctional catalysts in zinc-air batteries [J]. Chemical Industry and Engineering Progress, 2023, 42(S1): 276-286. |
[2] | HU Xi, WANG Mingshan, LI Enzhi, HUANG Siming, CHEN Junchen, GUO Bingshu, YU Bo, MA Zhiyuan, LI Xing. Research progress on preparation and sodium storage properties of tungsten disulfide composites [J]. Chemical Industry and Engineering Progress, 2023, 42(S1): 344-355. |
[3] | XU Chunshu, YAO Qingda, LIANG Yongxian, ZHOU Hualong. Research progress on functionalization strategies of covalent organic frame materials and its adsorption properties for Hg(Ⅱ) and Cr(Ⅵ) [J]. Chemical Industry and Engineering Progress, 2023, 42(S1): 461-478. |
[4] | GUO Qiang, ZHAO Wenkai, XIAO Yonghou. Numerical simulation of enhancing fluid perturbation to improve separation of dimethyl sulfide/nitrogen via pressure swing adsorption [J]. Chemical Industry and Engineering Progress, 2023, 42(S1): 64-72. |
[5] | SHAO Boshi, TAN Hongbo. Simulation on the enhancement of cryogenic removal of volatile organic compounds by sawtooth plate [J]. Chemical Industry and Engineering Progress, 2023, 42(S1): 84-93. |
[6] | WANG Tai, SU Shuo, LI Shengrui, MA Xiaolong, LIU Chuntao. Dynamic behavior of single bubble attached to the solid wall in the AC electric field [J]. Chemical Industry and Engineering Progress, 2023, 42(S1): 133-141. |
[7] | CHEN Kuangyin, LI Ruilan, TONG Yang, SHEN Jianhua. Structure design of gas diffusion layer in proton exchange membrane fuel cell [J]. Chemical Industry and Engineering Progress, 2023, 42(S1): 246-259. |
[8] | YANG Yudi, LI Wentao, QIAN Yongkang, HUI Junhong. Analysis of influencing factors of natural gas turbulent diffusion flame length in industrial combustion chamber [J]. Chemical Industry and Engineering Progress, 2023, 42(S1): 267-275. |
[9] | CHEN Lin, XU Peiyuan, ZHANG Xiaohui, CHEN Jie, XU Zhenjun, CHEN Jiaxiang, MI Xiaoguang, FENG Yongchang, MEI Deqing. Investigation on the LNG mixed refrigerant flow and heat transfer characteristics in coil-wounded heat exchanger (CWHE) system [J]. Chemical Industry and Engineering Progress, 2023, 42(9): 4496-4503. |
[10] | LIU Xuanlin, WANG Yikai, DAI Suzhou, YIN Yonggao. Analysis and optimization of decomposition reactor based on ammonium carbamate in heat pump [J]. Chemical Industry and Engineering Progress, 2023, 42(9): 4522-4530. |
[11] | ZHAO Xi, MA Haoran, LI Ping, HUANG Ailing. Simulation analysis and optimization design of mixing performance of staggered impact micromixer [J]. Chemical Industry and Engineering Progress, 2023, 42(9): 4559-4572. |
[12] | YANG Ying, HOU Haojie, HUANG Rui, CUI Yu, WANG Bing, LIU Jian, BAO Weiren, CHANG Liping, WANG Jiancheng, HAN Lina. Coal tar phenol-based carbon nanosphere prepared by Stöber method for adsorption of CO2 [J]. Chemical Industry and Engineering Progress, 2023, 42(9): 5011-5018. |
[13] | YIN Xinyu, PI Pihui, WEN Xiufang, QIAN Yu. Application of special wettability materials for anti-hydrate-nucleation and anti-hydrate-adhesion in oil and gas pipelines [J]. Chemical Industry and Engineering Progress, 2023, 42(8): 4076-4092. |
[14] | YE Zhendong, LIU Han, LYU Jing, ZHANG Yaning, LIU Hongzhi. Optimization of thermochemical energy storage reactor based on calcium and magnesium binary salt hydrates [J]. Chemical Industry and Engineering Progress, 2023, 42(8): 4307-4314. |
[15] | TANG Lei, ZENG Desen, LING Ziye, ZHANG Zhengguo, FANG Xiaoming. Research progress of phase change materials and their application systems for cool storage [J]. Chemical Industry and Engineering Progress, 2023, 42(8): 4322-4339. |
Viewed | ||||||
Full text |
|
|||||
Abstract |
|
|||||
京ICP备12046843号-2;京公网安备 11010102001994号 Copyright © Chemical Industry and Engineering Progress, All Rights Reserved. E-mail: hgjz@cip.com.cn Powered by Beijing Magtech Co. Ltd |