Chemical Industry and Engineering Progress ›› 2022, Vol. 41 ›› Issue (S1): 580-594.DOI: 10.16085/j.issn.1000-6613.2022-1116

• Resources and environmental engineering • Previous Articles     Next Articles

Research progress on recovery of spent vanadium-titanium based deNO x catalyst with alkaline process

ZHANG Xinyuan1(), ZHANG Bolin1,2(), ZHANG Shengen1()   

  1. 1.Institute for Advanced Materials and Technology, University of Science and Technology Beijing, Beijing 100083, China
    2.Shunde Graduate School, University of Science and Technology Beijing, Foshan 528399, Guangdong, China
  • Received:2022-06-14 Revised:2022-08-05 Online:2022-11-10 Published:2022-10-20
  • Contact: ZHANG Bolin, ZHANG Shengen

废钒钛系脱硝催化剂碱法回收研究进展

张新远1(), 张柏林1,2(), 张深根1()   

  1. 1.北京科技大学新材料技术研究院,北京 100083
    2.北京科技大学顺德研究生院,广东 佛山 528399
  • 通讯作者: 张柏林,张深根
  • 作者简介:张新远(1997—),男,硕士研究生,研究方向为废脱硝催化剂资源化。E-mail:18821798313@163.com
  • 基金资助:
    国家自然科学基金重点项目(U2002212);中央高校基本科研业务费项目(FRF-TP-20-097A1Z);北京科技大学顺德研究生院博士后科研经费(2020BH012)

Abstract:

Waste vanadium-titanium-based deNO x catalysts belong to HW50 hazardous wastes. They are rich in V, W/Mo and Ti strategic metal resources, and have dual characteristics of pollution and resources, and thus their recycling has important economic value and environmental benefits. Alkali recovery is the current mainstream recovery process. This paper mainly summarized the research progress of alkali leaching and alkali calcination recovery of waste vanadium-titanium-based deNO x catalysts. The process parameters of leaching with alkaline solutions such as NaOH, NH4OH and (NH4)2CO3, calcination and extraction with alkaline compounds such as NaOH, Na2CO3 and CaO, and the recovery effect of valuable metal elements are analyzed. In view of the corresponding problems such as large alkali consumption, high energy consumption, large amount of waste liquid and serious pollution in the current alkali process, it is proposed that further attention should be focused on the clarification of the synergistic effect between various alkaline substances that is through the coupling reaction of mixed alkalis to improv the recovery effect. This paper have good guiding significance for reducing the energy consumption of waste vanadium-titanium-based deNO x catalyst recovery and improving the utilization rate of basic compounds and the quality of recovered products.

Key words: spent vanadium-titanium-based deNO x catalyst, recovery, alkali leaching, alkali calcination

摘要:

废钒钛系脱硝催化剂属于HW50危险废物,富含V、W/Mo和Ti战略金属资源,具有污染性和资源性的双重特性,对其进行回收具有重要的经济价值和环境效益。碱法回收是当前的主流回收工艺。本文主要总结了废钒钛系脱硝催化剂碱浸法和碱焙烧法回收的研究进展,重点分析了采用NaOH、NH4OH、(NH4)2CO3等碱性溶液浸出以及采用NaOH、Na2CO3、CaO等碱性化合物焙烧提取工艺参数及对其中有价金属元素的回收效果。针对当前碱法工艺存在的碱耗量大、能耗高、废液产生量大、污染严重等相应问题,提出了进一步关注点应集中于阐明多种碱性物质之间的协同作用,通过混合碱的耦合反应提升回收效果。本文对降低废钒钛系脱硝催化剂回收能耗,提升碱性化合物利用率和回收产品质量具有良好的指导意义。

关键词: 废钒钛系脱硝催化剂, 回收, 碱浸法, 碱焙烧法

CLC Number: 

京ICP备12046843号-2;京公网安备 11010102001994号
Copyright © Chemical Industry and Engineering Progress, All Rights Reserved.
E-mail: hgjz@cip.com.cn
Powered by Beijing Magtech Co. Ltd