Chemical Industry and Engineering Progress ›› 2022, Vol. 41 ›› Issue (11): 5936-5945.DOI: 10.16085/j.issn.1000-6613.2022-0221

• Materials science and technology • Previous Articles     Next Articles

Electro- and photo-driven phase change composites based on stearic acid-infiltrated biochar

YU Xinghai1,2(), TANG Haiwei1,3, LI Yan’an1,3, HAN Yuqi1,3, MIN Xuemei1,3   

  1. 1.Institute of Flexible Composite Materials, Hexi University, Zhangye 734000, Gansu, China
    2.College of Chemistry and Chemical Engineering, Hexi University, Zhangye 734000, Gansu, China
    3.Key Laboratory of Hexi Corridor Resources and Utilization of Gansu, Hexi University, Zhangye 734000, Gansu, China
  • Received:2022-02-11 Revised:2022-05-17 Online:2022-11-28 Published:2022-11-25
  • Contact: YU Xinghai

一种光、电驱动的生物炭/硬脂酸复合相变材料的制备及其性能

禹兴海1,2(), 唐海慰1,3, 李艳安1,3, 韩玉琦1,3, 闵雪梅1,3   

  1. 1.河西学院柔性复合材料应用基础研究所,甘肃 张掖 734000
    2.河西学院化学化工学院,甘肃 张掖 734000
    3.河西学院甘肃省河西走廊特色资源利用省级重点实验室,甘肃 张掖 734000
  • 通讯作者: 禹兴海
  • 作者简介:禹兴海(1978—),男,博士,教授,研究方向为高分子复合材料。E-mail:yuxinghai455@163.com
  • 基金资助:
    国家自然科学基金(21865008);甘肃省委组织部2022年度省级重点人才项目(甘组通字[2022]77号)

Abstract:

Biochar (BC) matrix with three-dimensional porous structure and large specific surface area (2136.67m2/g) was prepared by pyrolysis and KOH etching at 700℃ using corn straw as precursors. Afterward, a novel composite phase change materials (CPCMs) were fabricated via injecting stearic acid (SA) in BC supports where SA was mixed in ethanol, and then injected into BC scaffolds under vacuum. The prepared CPCMs were characterized by IR, XRD, SEM, TG and DSC methods. The results demonstrated that the CPCMs with a mass content of 71.2% possess well heat storage ability with a fusion enthalpy of 126.3J/g and a solidification enthalpy of 128.7J/g, respectively. This phase change enthalpy appeared a negligible change after 100 melting and freezing cycles, and no clear leakage was observed during the phase transition process, indicating that CPCMs were unique shape-stabilized phase change materials with excellent heat storage performance and reversibility. Besides, the fabricated CPCMs can be triggered by light irradiation or safe voltage (e.g., 5.0V) to fulfill electro- or photo-to-thermal conversion with 78.3% and 70.1% conversion efficiencies, respectively. With excellent energy transformation performance and ability of heat storage and releasing, the CPCMs were believed to have great potential values not only in heat storage but also in green and clean energy conversion and application.

Key words: biochar, stearic acid, electro- and photo- driven, composite phase change materials

摘要:

利用农业固体废弃物玉米秸秆为前体,经700℃高温热解、KOH刻蚀后得到了具有三维孔道结构和大比表面积(2136.67m²/g)的生物炭(KBC)。以KBC为载体,利用乙醇溶解、真空浸渍的方式将有机相变材料硬脂酸(SA)注入其内部孔道中,获得了一种生物炭/硬脂酸(KBC/SA)复合相变材料。通过红外光谱(IR)、粉末X射线衍射(XRD)、扫描电镜(SEM)、热重分析(TG)、差示扫描量热分析(DSC)等表征手段,对其组成结构、微观形貌、储热性能以及稳定性进行了研究。结果表明,当SA质量分数为71.2%时,复合相变材料的储热性能最佳,其相变过程中的熔融焓和结晶焓分别为126.3J/g和128.7J/g,且经过100次循环储、放热性能测试后,相变焓值无明显变化。相变过程中无渗漏现象发生,表明KBC/SA是一种性能优异的定形相变材料。此外,KBC/SA复合相变材料具有良好的光热、电热转换能力,能够将太阳光能和电能转化为热能并储存和释放。当被模拟太阳光和直流电(U=5.0V)驱动后,其光热、电热转换效率可分别达到78.3%和70.1%。因此所制备的KBC/SA复合相变材料不仅能作为一种储热材料使用,而且在绿色清洁能源转化利用方面具有潜在价值。

关键词: 生物炭, 硬脂酸, 光、电驱动, 复合相变材料

CLC Number: 

京ICP备12046843号-2;京公网安备 11010102001994号
Copyright © Chemical Industry and Engineering Progress, All Rights Reserved.
E-mail: hgjz@cip.com.cn
Powered by Beijing Magtech Co. Ltd