Chemical Industry and Engineering Progress ›› 2020, Vol. 39 ›› Issue (1): 267-277.DOI: 10.16085/j.issn.1000-6613.2019-0636

• Materials science and technology • Previous Articles     Next Articles

Optimal preparation of quaternary catalytic functional PPS filter materials and their chemical properties

Yinsheng LI(),Meng LIU(),Yufeng DUAN,Cong CHEN,Na LI,Jianhong LÜ   

  1. Key Laboratory of Energy Thermal Conversion and Control of Ministry of Education, School of Energy and Environment, Southeast University, Nanjing 210096, Jiangsu, China
  • Received:2019-04-21 Online:2020-01-14 Published:2020-01-05
  • Contact: Meng LIU

脱硝协同汞氧化聚苯硫醚四元催化滤料制备方法及理化特性

李银生(),刘猛(),段钰锋,陈聪,李娜,吕剑虹   

  1. 东南大学能源与环境学院,能源热转换及其过程测控教育部重点实验室,江苏 南京 210096
  • 通讯作者: 刘猛
  • 作者简介:李银生(1995—),男,硕士研究生,研究方向为大气污染物控制。E-mail:2929732729@qq.com
  • 基金资助:
    国家重点研发计划(2016YFB0600604-02);江苏省科技成果转化专项资金(SBA2018020041)

Abstract:

Catalytic polyphenylene sulfide(PPS) filters were prepared by using in-situ method(ISM), impregnation calcination method(ICM) and coating method(CM), respectively. The catalytic activities for NOx and Hg0 oxidation of the catalysts at low temperature were investigated in a fixed bed system to determine the best preparation method and related basic operation parameters. In addition, the surface morphology, crystalline structure and NOx occurrence morphology of (0.9)Mn-Ce-Fe-Co-Ox/PPS@ISM were analyzed. The experimental results showed that the maximum NOx and Hg0 conversions decreased in the sequence of Mn-Ce-Fe-Co-Ox/PPS@ISM > Mn-Ce-Fe-Co-Ox/PPS@ICM > Mn-Ce-Fe-Co-Ox/PPS@CM. The maximum efficiencies of NO oxidation, NOx reduction and Hg0 oxidation on (0.9)Mn-Ce-Fe-Co-Ox/PPS@ISM at 170℃ were 8.6%, 84.6% and 93.2%, respectively. The results of temperature programmed desorption showed that the NO interaction types were mainly in the form of nitrite/nitrate, followed by the adsorption state NO2. Besides, the mercury on the catalyst mainly existed in the form of HgO and Hg(NO3)2/Hg2(NO3)2 in the presence of NO. The results of characterizations showed that MnOx, CeOx, CoOx and Fe2O3 were in the form of amorphous phase and well dispersed on PPS@ISM in a flocculent structure.

Key words: composites, polymers, in-situ method, impregnation calcination method, coating method, Hg0 oxidation, selective catalytic reduction (SCR)

摘要:

采用原位氧化法(ISM)、浸渍煅烧法(ICM)和涂覆法(CM)制备聚苯硫醚(PPS)双效催化滤料,在模拟烟气固定床系统中考察了滤料低温NOx催化协同Hg0氧化性能,深入分析了原位氧化滤料表面形貌、元素分布、晶态结构和Hg及NOx赋存形态。结果表明:在相同条件下,3种制备方法对应滤料催化活性大小顺序为Mn-Ce-Fe-Co-Ox/PPS@ISM>Mn-Ce-Fe-Co-Ox/PPS@ICM>Mn-Ce-Fe-Co-Ox/PPS@CM。ISM对应PPS单层饱和负载量约为0.9,活性反应温度窗口为110~210℃,其中170℃时Mn-Ce-Fe-Co-Ox/PPS@ISM的非均相NO氧化、NOx还原和Hg0氧化效率最高分别达到8.6%、84.6%和93.2%。程序升温脱附实验结果表明:(0.9)Mn-Ce-Fe-Co-Ox/PPS@ ISM表面NOx吸附活性位点中弱碱位数量占优,而中碱位化学吸附NO主要以NOyy=2或3)结构存在,歧化态NO2次之。同时,Hg与NO在氧气条件下以非均相反应途径转化为HgO和Hg(NO3)2/Hg2(NO3)2。表征结果表明:ISM制备的MnOx、CeOx、CoOx和Fe2O3复合氧化物呈弱晶相、高度分散团絮状结构赋存于PPS@ISM纤维。

关键词: 复合材料, 聚合物, 原位氧化法, 浸渍煅烧法, 涂覆法, 汞氧化, 选择催化还原

CLC Number: 

京ICP备12046843号-2;京公网安备 11010102001994号
Copyright © Chemical Industry and Engineering Progress, All Rights Reserved.
E-mail: hgjz@cip.com.cn
Powered by Beijing Magtech Co. Ltd