化工进展 ›› 2020, Vol. 39 ›› Issue (2): 489-495.DOI: 10.16085/j.issn.1000-6613.2019-0704

• 能源加工与技术 • 上一篇    下一篇

木质纤维素预处理技术研究进展

曹运齐1(),解先利1,郭振强1,王严严1,刘云云1(),吴蔼民2,赵于1   

  1. 1.陕西科技大学机电工程学院,陕西 西安 710021
    2.华南农业大学林学与风景园林学院,广东 广州 510642
  • 收稿日期:2019-05-04 出版日期:2020-02-05 发布日期:2020-03-12
  • 通讯作者: 刘云云
  • 作者简介:曹运齐(1994—),男,硕士研究生,研究方向为生物质资源高效转化与利用技术开发。E-mail:209118131@qq.com
  • 基金资助:
    陕西省自然科学基础研究计划青年项目(2018JQ5134);亚热带农业生物资源保护与利用国家重点实验室开放基金(SKLCUSA-b201802);陕西省教育厅项目(16JK1088)

Research progress on lignocellulose pretreatment technology

Yunqi CAO1(),Xianli XIE1,Zhenqiang GUO1,Yanyan WANG1,Yunyun LIU1(),Aimin WU2,Yu ZHAO1   

  1. 1.School of Mechanical and Electrical Engineering, Shaanxi University of Science & Technology, Xi'an 710021, Shaanxi, China
    2.College of Forestry and Landscape Architecture, South China Agricultural University, Guangzhou 510642, Guangdong, China
  • Received:2019-05-04 Online:2020-02-05 Published:2020-03-12
  • Contact: Yunyun LIU

摘要:

木质纤维素转化燃料乙醇一般需要经过原料预处理、酶水解和发酵过程。由于木质纤维原料化学结构复杂、直接酶解效率非常低,一般在酶水解之前需要进行适当的预处理以打破其致密结构,增加纤维表面积,提高后续纤维素酶的可及性。预处理程度直接影响纤维底物后续酶水解的效果。本文在木质纤维素常用预处理技术分析的基础上,重点讨论了3种相对高效的预处理技术:微波辅助离子液体预处理、两阶段深度共熔溶剂(DES)预处理和氯化铁预处理技术,分析了它们的优势、不足及发展现状。文中指出微波辅助离子液体预处理可有效解构木质素和半纤维素,破坏纤维素结晶区域,利于后续酶解,但微波加热过程会使离子液体分解和部分底物碳化。两阶段DES预处理可有效提高酶水解效率,但是预处理后原料中残留的DES可能会对后续反应中纤维素酶和微生物产生抑制作用。氯化铁预处理可有效破坏木质素与碳水化合物间的结合键,脱除底物中的半纤维素,而对木质素和纤维素降解较少,具有很好的发展前景。由于单一预处理技术的局限性,寻求低成本高效的联合预处理技术将是未来重点发展的方向。

关键词: 木质纤维素, 预处理, 微波辅助离子液体, 两阶段深度共熔溶剂, 氯化铁

Abstract:

Fuel ethanol conversion by lignocellulose generally requires raw materials pretreatment, enzymatic hydrolysis and fermentation processes. The efficiency of direct enzymatic hydrolysis of cellulosic biomass is very low due to the complex chemical structure of the lignocellulosic materials. Generally, appropriate pretreatment is necessary before enzymatic hydrolysis is carried out in order to break the dense structure of substrate, increase the surface area of the cellulose and improve the subsequent cellulase accessibility. Based on the analysis of common pretreatment techniques for lignocellulose, this paper focused on three relatively efficient pretreatment techniques: microwave-assisted ionic liquid pretreatment, two-stage deep eutectic solvents pretreatment and FeCl3 pretreatment. Their strengths and weaknesses were analyzed. Microwave-assisted ionic liquid pretreatment can effectively deconstruct lignin and hemicellulose, destroy the crystalline region of cellulose, and facilitate subsequent enzymatic hydrolysis. However, microwave heating process will decompose ionic liquid and carbonize some substrates, which will reduce the effect of pretreatment. Two-stage DES pretreatment can effectively improve the enzymatic hydrolysis efficiency, but the residual DES in the raw material after pretreatment may inhibit the cellulase and microorganisms in the subsequent reaction. FeCl3 pretreatment can effectively destroy the ether bond and partial ester bond between lignin and carbohydrate, and remove hemicellulose from the substrate, while less degradation of lignin and cellulose. Finally, the paper prospected the development trend of lignocellulose pretreatment technology.

Key words: lignocellulose, pretreatment, microwave-assisted ionic liquid, two-stage DES, Ferric trichloride

中图分类号: 

京ICP备12046843号-2;京公网安备 11010102001994号
版权所有 © 《化工进展》编辑部
地址:北京市东城区青年湖南街13号 邮编:100011
电子信箱:hgjz@cip.com.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn