化工进展 ›› 2019, Vol. 38 ›› Issue (12): 5449-5456.DOI: 10.16085/j.issn.1000-6613.2019-0474

• 材料科学与技术 • 上一篇    下一篇

含甲基纤维素的NaA沸石膜的制备和表征

刘光瑞(),杨建华(),王磊,鲁金明,张艳,王金渠   

  1. 大连理工大学化工与环境生命学部,辽宁 大连 116000
  • 收稿日期:2019-03-28 出版日期:2019-12-05 发布日期:2019-12-05
  • 通讯作者: 杨建华
  • 作者简介:刘光瑞(1992—),男,硕士研究生,研究方向为A型沸石膜的制备与改性。E-mail:251685183@qq.com
  • 基金资助:
    国家自然科学基金(21776032)

Preparation and characterization of NaA zeolite membrane with methylcellulose

Guangrui LIU(),Jianhua YANG(),Lei WANG,Jinming LU,Yan ZHANG,Jinqu WANG   

  1. Faculty of Chemical, Environment and Biological Science and Technology, Dalian University of Technology, Dalian 116000, Liaoning, China
  • Received:2019-03-28 Online:2019-12-05 Published:2019-12-05
  • Contact: Jianhua YANG

摘要:

NaA沸石膜具有规则的孔道结构,利于分子传输,在有机物脱水领域有一定的应用。为使沸石膜生长更连续均匀,提高渗透汽化性能,本文以甲基纤维素作为空间限制剂加入合成液,探究碱度、晶化温度以及晶化时间对膜的影响,按最优条件制备合成液,并依据质量比m(MC)∶m(H2O)=1∶100添加甲基纤维素,制备NaA沸石膜。表征方法采用XRD、SEM和渗透汽化3种方式,结果表明添加甲基纤维素的沸石膜表面结构完整,生长致密且性能优良,在75℃下对0.6mol/L的NaCl水溶液做渗透汽化测试时,通量达8.33kg/(m2·h),盐离子截留率为99.95%。在0.6mol/L的NaCl的水溶液中测试72h,结果表明添加甲基纤维素的NaA沸石膜时间依存性更好,通量保持在8.30kg/(m2·h)左右,离子截留率稳定在99.90%。渗透汽化分离ω(C2H6O)=90%乙醇的水溶液,随着温度从60℃升高到75℃,沸石膜的通量由1.55kg/(m2·h)升高到2.56kg/(m2·h),渗透侧水含量保持在99.90%左右。

关键词: NaA沸石膜, 甲基纤维素, 渗透汽化, 脱盐, 二次生长法

Abstract:

The NaA zeolite has a regular pore structure and strong hydrophilicity which make it a favorable material for molecular transport. Favorable characteristics of this material can be used for the development of NaA zeolite membrane with an excellent selectivity for dehydration of organic matter. Secondary growth method was employed to improve the pervaporation performance of NaA zeolite membrane. The effects of alkalinity, crystallization temperature and crystallization time were investigated. The synthetic fluid was prepared according to the optimal conditions. A NaA zeolite membrane was prepared by adding methylcellulose and water with a ratio of 1∶100. The SEM, XRD and pervaporation performance tests showed that the NaA zeolite membrane prepared by the improved method has a dense growth, compact structure and excellent pervaporation performance. The synthesized membrane exhibited a high flux and salt rejection of 8.33kg/(m2·h) and 99.95% at 75℃ for 0.6mol/L of NaCl aqueous solution respectively. The results showed that the NaA zeolite membranes for the desalination of 0.6mol/L of NaCl solution displayed a good stability over a period of 72 hours while the flux remains constant at 8.30kg/(m2·h) with a rejection rate of 99.90%. Moreover, the aqueous solution of ω(C2H6O) = 90% ethanol was separated by pervaporation at a temperature of 60℃ to 75℃. The flux of the zeolite membrane was increased from 1.55kg/(m2·h) to 2.56kg/(m2·h). The rejection rate was maintained around 99.90%.

Key words: NaA zeolite membrane, methylcellulose, pervaporation, desalination, secondary growth method

中图分类号: 

京ICP备12046843号-2;京公网安备 11010102001994号
版权所有 © 《化工进展》编辑部
地址:北京市东城区青年湖南街13号 邮编:100011
电子信箱:hgjz@cip.com.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn