[1] 住房和城乡建设部. 2015年城乡建设统计公报[J]. 城乡建设,2016(8):58-63. MHURC. Statistical bulletin of urban and rural construction in 2015[J]. Urban and Rural Development, 2016(8):58-63.
[2] 顾杨. 我国市政污泥干化焚烧技术及应用[J]. 中国市政工程,2016(3):45-48. GU Yang. Municipal sludge drying incineration technology & application in China[J]. China Municipal Engineering, 2016(3):45-48.
[3] 张杰. 污泥资源化有望成为行业发展趋势[N]. 中国环境报, 2016-10-11(10). ZHANG J. Sludge recycling is expected to become the development trend of the industry[N]. China Environmental News, 2016-10-11(10).
[4] DENG W Y, LI X D, YAN J H, et al. Moisture distribution in sludges based on different testing methods[J]. Journal of Environmental Sciences, 2011, 23(5):875-880.
[5] DENG W Y, YAN J H, LI X D, et al. Measurement and simulation of the contact drying of sewage sludge in a Nara-type paddle dryer[J]. Chemical Engineering Science, 2009, 24(64):5117-5124.
[6] YAN J H, DENG W Y, LI X D, et al. Experimental and theoretical study of agitated contact drying of sewage sludge under partial vacuum conditions[J]. Drying Technology, 2009, 27(6):787-796.
[7] PEETERS B, DEWIL R, VERNIMMEN L, et al. Addition of polyaluminiumchloride(PACl) to waste activated sludge to mitigate the negative effects of its sticky phase in dewatering-drying operations[J]. Water Research, 2013, 47(11):3600-3609.
[8] FERRASSE J H, ARLABOSSE P, LECOMTE D, et al. Heat, momentum, and mass transfer measurements in indirect agitated sludge dryer[J]. Drying Technology, 2002, 20(4/5):749-769.
[9] 刘峰,史元芝,倪春林,等. 城镇污泥干燥过程中胶粘性的研究[J]. 干燥技术与设备, 2010, 8(6):285-290. LIU Feng, SHI Yuanzhi, NI Chunlin, et al. Study of town sludge stickiness during drying process[J]. Drying Technology & Equipment, 2010, 8(6):285-290.
[10] 金澎,朱秀伟,亓永亮,等. 市政污泥干燥过程中粘性的研究[J]. 干燥技术与设备, 2015, 13(5):35-42. JIN Peng, ZHU Xiuwei, QI Yongliang, et al. Study of town sludge stickiness in drying process[J]. Drying Technology & Equipment, 2015, 13(5):35-42.
[11] PEETERS B. Effect of activated sludge composition on its dewaterability and sticky phase[D]. Catholic University of Leuven (Belgium), Department of Chemical Engineering, Research Division BioTeC, 2011.
[12] INTIPUNYA P, SHRESTHA A, HOWES T, et al. A modified cyclone stickiness test for characterizing food powders[J]. Journal of Food Engineering, 2009, 94(3):300-306.
[13] BHANDARI B. Relating the stickiness property of foods undergoing drying and dried products to their surface energetics[J]. Drying Technology, 2005, 23(4):781-797.
[14] ADHIKARI B, HOWES T, SHRESTHA A, et al. Effect of surface tension and viscosity on the surface stickiness of carbohydrate and protein solutions[J]. Journal of Food Engineering, 2007, 79(4):1136-1143.
[15] PATERSON A H, ZUO J Y, BRONLUND J E, et al. Stickiness curves of high fat dairy powders using the particle gun[J]. International Dairy Journal, 2007, 17(8):998-1005.
[16] PAPADAKIS S E, BAHU R E. The sticky issues of drying[J]. Drying Technology, 1992, 10(4):817-837.
[17] BECERRA F Y G. Recovery of surface active material from municipal wastewater activated sludge[D]. Department of Chemical Engineering and Applied Chemistry, University of Toronto, 2010.
[18] PERVAIZ M, SAIN M. Protein extraction from secondary sludge of paper mill wastewater and its utilization as a wood adhesive[J]. Bio. Resources, 2011, 6(2):961-970.
[19] LI H, ZOU S X, LI Y Y, et al. Characteristics and model of sludge adhesion during thermal drying[J]. Environmental Technology, 2013, 34(6):807-812.
[20] DENG W Y, YUAN M H, MEI J, et al. Effect of calcium oxide (CaO) and sawdust on adhesion and cohesion characteristics of sewage sludge under agitated and non-agitated drying conditions[J]. Water Research, 2017, 110:160.
[21] SEYSSIECQ I, FERRASSE J H, ROCHE N. State-of-the-art:rheological characterization of wastewater treatment sludge[J]. Biochemical Engineering Journal, 2003, 16(1):41-56.
[22] POLLICE A, LEARA G, SATURNO D, et al. Effects of sludge retention time on the performance of a membrane bioreactor treating municipal sewage[J]. Journal of Membrane Science, 2008, 317(1/2):65-70.
[23] RUIZ-HERNANDO M, LABANDA J, LORENS J. Effect of ultrasonic waves on the rheological features of secondary sludge[J]. Biochemical Engineering Journal, 2010, 52(2/3):131-136.
[24] ARLABOSSE P, CHITU T. Identification of the limiting mechanism in contact drying of agitated sewage sludge[J]. Drying Technology, 2007, 25(4):557-567.
[25] FERRASSE J H, ARLABOSSE P, LECOMTE D. Heat, momentum, and mass transfer measurements in indirect agitated sludge dryer[J]. Drying Technology, 2002, 20(4-5):749-769.
[26] PEETERS B, DWEIL R, VAN-IMPE J F, et al. Using a shear test-based lab protocol to map the sticky phase of activated sludge[J]. Environmental Engineering Science, 2011, 28(1):81-85.
[27] LI B, WANG F, CHI Y, et al. Adhesion and cohesion characteristics of sewage sludge during drying[J]. Drying Technology, 2014, 32(3):1598-1607.
[28] 邓文义,梅静,刘亚军,等. CaO和木屑对市政污泥干化过程中黏滞特性的影响[J],化工进展, 2017, 36(5):1933-1939. DENG Wenyi, MEI Jing, LIU Yajun, et al. Effect of CaO and sawdust on sticky properties of municipal sewage sludge during drying process[J]. Chemical Industry and Engineering Progress, 2017, 36(5):1933-1939.
[29] WERNER S R L, JONES J R, PATERSON A H J. Stickiness during drying of amorphous skin-forming solutions using a probe tack test[J]. Journal of Food Engineering, 2007, 81(4):647-656.
[30] LI H, ZOU S X, LI C C. Liming pretreatment reduces sludge build-up on the dryer wall during thermal drying[J]. Drying Technology,2012, 30(14):1563-1569.
[31] 吴兆晴. 污泥粘壁影响因素实验探索及粘壁机理分析[D]. 天津:天津大学, 2007. WU Zhaoqing. Experimental and mechanism study on stickiness of sewage sludge[D]. Tianjin:Tianjin University, 2007.
[32] DIEUDE-FAUVEL E, DAMME H V, BAUDEZ J C. Improving rheological sludge characterization with electrical measurements[J]. Chemical Engineering Research and Desigh, 2009, 87(7):982-986.
[33] 王伟云. 脱水污泥流变特性及表观干燥动力学研究[D]. 沈阳:沈阳航空工学院, 2007. WANG W Y. Research on the rheological property and drying dynamic of dewatered sludge[D]. Shenyang:Shenyang Institute of Aeronautical Engineering, 2007.
[34] SHENG G P, YU H Q, LI X Y. Extracellular polymeric substances (EPS) of microbial aggregates in biological wastewater treatment systems:a review[J]. Biotechnology Advances, 2010, 28(6):882-894.
[35] 王伟之,徐晖,吴兆晴,等. 污泥热干燥粘壁的影响因素与机理分析[J]. 中国给水排水, 2009, 25(17):1-4. WANG W Z, XU H, WU Z Q, et al. Analysis on influencing factors and mechanism of sludge adhering behavior during thermal drying[J]. China Water & Wastewater, 2009, 25(17):1-4.
[36] CAO Y Y, WEI X, CAI P, et al. Preferential adsorption of extracellular polymeric substances from bacteria on clay minerals and iron oxide[J]. Colloids and Surfaces B:Biointerfaces, 2011, 83(1):122-127.
[37] SHENG G P, ZHANG M L, YU H Q. Characterization of adsorption properties of extracellular polymeric substances (EPS) extracted from sludge[J]. Colloids and Surfaces B:Biointerfaces, 2008, 62(1):83-90.
[38] LIU X M, SHENG G P, LUO H W, et al. Contribution of extracellular polymeric substances (EPS) to the sludge aggregation[J]. Environmental Science and Technology, 2010, 44(11):4355-4360.
[39] LONG G Y, ZHU P T, SHEN Y, et al. Influence of extracellular polymeric substances(EPS) on deposition kinetics of bacteria[J]. Environmental Science and Technology, 2009, 43(7):2308-2314.
[40] CLECH P L, CHEN V, FANE T A G. Fouling in membrane bioreactors used in wastewater treatment[J]. Journal of Membrane Science, 2006, 284(1/2):17-53.
[41] SANIN F D, CLARKSON W W, VESILIND P A. Sludge engineering:the treatment and disposal of wastewater sludges[M]. 1st ed. Pennsylvania:DEStech Publications Inc., 2011.
[42] MU Y, YU H Q, WANG Y. A kinetic approach to anaerobic hydrogen-producing process[J]. Water Research, 2007, 41(5):1152-1160.
[43] ABU-JDAYIL B, BANAT F, AL-SAMERAIY M. Steady rheological properties of rotating biological contactor (RBC) sludge[J]. Journal of Water Resource and Protection, 2010, 2(1):1-7.
[44] YANG F, BICH A, SHANDALOV S, et al. Yield stress and rheological characteristics of activated sludge in an airlift membrane bioreactor[J]. Journal of Membrane Science, 2009, 334(1/2):83-90.
[45] HOPPU P, GRÖNROOS A, SCHANTZ S, et al. New processing technique for viscous amorphous materials and characterization of their stickiness and deformability[J]. Enropean Journal of Pharmaceutics and Biopharmaceutics, 2009, 72(1):183-188.
[46] CHEN J S, FENG M, GONZALEZ Y, et al. Application of probe tensile method for quantitative characterization of the stickiness of fluid foods[J]. Journal of Food Engineering, 2008, 87(2):281-290.
[47] CHEN X D. Conformability of the kinetics of cohesion/stickiness development in amorphous sugar particles to the classical Arrhenius law[J]. Journal of Food Engineering, 2007, 79(2):675-680.
[48] LÉONARD A, MENESES E, TRONG E L, et al. Influence of back mixing on the convective drying of residual sludges in a fixed bed[J]. Water Research, 2008, 42(10-11):2671-2677.
[49] MA D G, ZHANG S T, LI Z Y. Control of sludge-to-wall adhesion by applying a polarized electric field[J]. Drying Technology, 2007, 25(4):639-643.
[50] DENG W Y, SU Y X. Experimental study on agitated drying kinetics of sewage sludge under the effects of different additive agents[J]. Journal of Environmental Sciences, 2014, 26(7):1523-1529. |