市政污泥热力干化过程中黏滞特性研究进展

doi:10.16085/j.issn.1000-6613.2017-1754

摘要/Abstract

摘要： 黏滞现象是城镇污泥脱水干化过程中面临的主要问题之一，污泥在干化设备中的黏附和结团，导致干化设备运行效率大幅降低，给污泥干化系统的经济性和安全性带来显著的负面影响。本文从污泥黏附力和结团力入手，简要介绍了污泥黏滞现象的形成机理以及低含水率条件下污泥黏滞性的主要测量方法，包括搅拌法、平板法、黏附-结团失效特性法、阻抗法、黏附量法和滑板黏度法等，并对比分析了各种分析方法的优缺点。综述了包括胞外聚合物（EPS）、温度和污泥含水率等主要因素对污泥黏滞特性的影响规律，并简要探讨了各因素的影响机理。概述了国内外污泥降黏方法的研究进展，讨论了各种降黏方法的工业应用前景，同时探讨了污泥黏滞特性研究领域未来值得深入研究的方向。

关键词: 污泥, 干化, 黏滞, 黏附, 结团

Abstract: Sticky phenomenon is one of the main problems encountered during dewatering and drying of sewage sludge. The operating efficiency of drying equipment will be greatly influenced by adhesion and cohesion of sewage sludge, which brings negative impact to the economy and security of the system. The formation mechanism of sticky phenomenon of sewage sludge was briefly introduced based on the illustration of adhesive and cohesive force, as well as the testing methods of sticky properties of sewage sludge under low moisture content, such as agitation method, plate method, adhesive-cohesive failure method, electrical resistivity method, build-up method and sliding plate viscosity method, etc. The merits and drawbacks of the different testing methods were also discussed. The influencing of extracellular polymer substances(EPS), temperature and moisture content on sticky properties of sewage sludge were reviewed, and mechanisms were also briefly discussed. The research progress in the viscosity reduction method of sewage sludge was also discussed, as well as the industrial application aspects of the different viscosity reduction methods. The future trends of the research on sticky properties of sewage sludge were represented.

Key words: sludge, drying, sticky, adhesive, cohesive

中图分类号:

X705

刘亚军, 王爱春, 邓文义. 市政污泥热力干化过程中黏滞特性研究进展[J]. 化工进展, 2018, 37(06): 2378-2385.

LIU Yajun, WANG Aichun, DENG Wenyi. Progress in sticky characteristics of sewage sludge during thermal drying process[J]. Chemical Industry and Engineering Progress, 2018, 37(06): 2378-2385.

参考文献

[1] 住房和城乡建设部. 2015年城乡建设统计公报[J]. 城乡建设,2016(8):58-63. MHURC. Statistical bulletin of urban and rural construction in 2015[J]. Urban and Rural Development, 2016(8):58-63.
[2] 顾杨. 我国市政污泥干化焚烧技术及应用[J]. 中国市政工程,2016(3):45-48. GU Yang. Municipal sludge drying incineration technology & application in China[J]. China Municipal Engineering, 2016(3):45-48.
[3] 张杰. 污泥资源化有望成为行业发展趋势[N]. 中国环境报, 2016-10-11(10). ZHANG J. Sludge recycling is expected to become the development trend of the industry[N]. China Environmental News, 2016-10-11(10).
[4] DENG W Y, LI X D, YAN J H, et al. Moisture distribution in sludges based on different testing methods[J]. Journal of Environmental Sciences, 2011, 23(5):875-880.
[5] DENG W Y, YAN J H, LI X D, et al. Measurement and simulation of the contact drying of sewage sludge in a Nara-type paddle dryer[J]. Chemical Engineering Science, 2009, 24(64):5117-5124.
[6] YAN J H, DENG W Y, LI X D, et al. Experimental and theoretical study of agitated contact drying of sewage sludge under partial vacuum conditions[J]. Drying Technology, 2009, 27(6):787-796.
[7] PEETERS B, DEWIL R, VERNIMMEN L, et al. Addition of polyaluminiumchloride(PACl) to waste activated sludge to mitigate the negative effects of its sticky phase in dewatering-drying operations[J]. Water Research, 2013, 47(11):3600-3609.
[8] FERRASSE J H, ARLABOSSE P, LECOMTE D, et al. Heat, momentum, and mass transfer measurements in indirect agitated sludge dryer[J]. Drying Technology, 2002, 20(4/5):749-769.
[9] 刘峰,史元芝,倪春林,等. 城镇污泥干燥过程中胶粘性的研究[J]. 干燥技术与设备, 2010, 8(6):285-290. LIU Feng, SHI Yuanzhi, NI Chunlin, et al. Study of town sludge stickiness during drying process[J]. Drying Technology & Equipment, 2010, 8(6):285-290.
[10] 金澎,朱秀伟,亓永亮,等. 市政污泥干燥过程中粘性的研究[J]. 干燥技术与设备, 2015, 13(5):35-42. JIN Peng, ZHU Xiuwei, QI Yongliang, et al. Study of town sludge stickiness in drying process[J]. Drying Technology & Equipment, 2015, 13(5):35-42.
[11] PEETERS B. Effect of activated sludge composition on its dewaterability and sticky phase[D]. Catholic University of Leuven (Belgium), Department of Chemical Engineering, Research Division BioTeC, 2011.
[12] INTIPUNYA P, SHRESTHA A, HOWES T, et al. A modified cyclone stickiness test for characterizing food powders[J]. Journal of Food Engineering, 2009, 94(3):300-306.
[13] BHANDARI B. Relating the stickiness property of foods undergoing drying and dried products to their surface energetics[J]. Drying Technology, 2005, 23(4):781-797.
[14] ADHIKARI B, HOWES T, SHRESTHA A, et al. Effect of surface tension and viscosity on the surface stickiness of carbohydrate and protein solutions[J]. Journal of Food Engineering, 2007, 79(4):1136-1143.
[15] PATERSON A H, ZUO J Y, BRONLUND J E, et al. Stickiness curves of high fat dairy powders using the particle gun[J]. International Dairy Journal, 2007, 17(8):998-1005.
[16] PAPADAKIS S E, BAHU R E. The sticky issues of drying[J]. Drying Technology, 1992, 10(4):817-837.
[17] BECERRA F Y G. Recovery of surface active material from municipal wastewater activated sludge[D]. Department of Chemical Engineering and Applied Chemistry, University of Toronto, 2010.
[18] PERVAIZ M, SAIN M. Protein extraction from secondary sludge of paper mill wastewater and its utilization as a wood adhesive[J]. Bio. Resources, 2011, 6(2):961-970.
[19] LI H, ZOU S X, LI Y Y, et al. Characteristics and model of sludge adhesion during thermal drying[J]. Environmental Technology, 2013, 34(6):807-812.
[20] DENG W Y, YUAN M H, MEI J, et al. Effect of calcium oxide (CaO) and sawdust on adhesion and cohesion characteristics of sewage sludge under agitated and non-agitated drying conditions[J]. Water Research, 2017, 110:160.
[21] SEYSSIECQ I, FERRASSE J H, ROCHE N. State-of-the-art:rheological characterization of wastewater treatment sludge[J]. Biochemical Engineering Journal, 2003, 16(1):41-56.
[22] POLLICE A, LEARA G, SATURNO D, et al. Effects of sludge retention time on the performance of a membrane bioreactor treating municipal sewage[J]. Journal of Membrane Science, 2008, 317(1/2):65-70.
[23] RUIZ-HERNANDO M, LABANDA J, LORENS J. Effect of ultrasonic waves on the rheological features of secondary sludge[J]. Biochemical Engineering Journal, 2010, 52(2/3):131-136.
[24] ARLABOSSE P, CHITU T. Identification of the limiting mechanism in contact drying of agitated sewage sludge[J]. Drying Technology, 2007, 25(4):557-567.
[25] FERRASSE J H, ARLABOSSE P, LECOMTE D. Heat, momentum, and mass transfer measurements in indirect agitated sludge dryer[J]. Drying Technology, 2002, 20(4-5):749-769.
[26] PEETERS B, DWEIL R, VAN-IMPE J F, et al. Using a shear test-based lab protocol to map the sticky phase of activated sludge[J]. Environmental Engineering Science, 2011, 28(1):81-85.
[27] LI B, WANG F, CHI Y, et al. Adhesion and cohesion characteristics of sewage sludge during drying[J]. Drying Technology, 2014, 32(3):1598-1607.
[28] 邓文义,梅静,刘亚军,等. CaO和木屑对市政污泥干化过程中黏滞特性的影响[J],化工进展, 2017, 36(5):1933-1939. DENG Wenyi, MEI Jing, LIU Yajun, et al. Effect of CaO and sawdust on sticky properties of municipal sewage sludge during drying process[J]. Chemical Industry and Engineering Progress, 2017, 36(5):1933-1939.
[29] WERNER S R L, JONES J R, PATERSON A H J. Stickiness during drying of amorphous skin-forming solutions using a probe tack test[J]. Journal of Food Engineering, 2007, 81(4):647-656.
[30] LI H, ZOU S X, LI C C. Liming pretreatment reduces sludge build-up on the dryer wall during thermal drying[J]. Drying Technology,2012, 30(14):1563-1569.
[31] 吴兆晴. 污泥粘壁影响因素实验探索及粘壁机理分析[D]. 天津:天津大学, 2007. WU Zhaoqing. Experimental and mechanism study on stickiness of sewage sludge[D]. Tianjin:Tianjin University, 2007.
[32] DIEUDE-FAUVEL E, DAMME H V, BAUDEZ J C. Improving rheological sludge characterization with electrical measurements[J]. Chemical Engineering Research and Desigh, 2009, 87(7):982-986.
[33] 王伟云. 脱水污泥流变特性及表观干燥动力学研究[D]. 沈阳:沈阳航空工学院, 2007. WANG W Y. Research on the rheological property and drying dynamic of dewatered sludge[D]. Shenyang:Shenyang Institute of Aeronautical Engineering, 2007.
[34] SHENG G P, YU H Q, LI X Y. Extracellular polymeric substances (EPS) of microbial aggregates in biological wastewater treatment systems:a review[J]. Biotechnology Advances, 2010, 28(6):882-894.
[35] 王伟之,徐晖,吴兆晴,等. 污泥热干燥粘壁的影响因素与机理分析[J]. 中国给水排水, 2009, 25(17):1-4. WANG W Z, XU H, WU Z Q, et al. Analysis on influencing factors and mechanism of sludge adhering behavior during thermal drying[J]. China Water & Wastewater, 2009, 25(17):1-4.
[36] CAO Y Y, WEI X, CAI P, et al. Preferential adsorption of extracellular polymeric substances from bacteria on clay minerals and iron oxide[J]. Colloids and Surfaces B:Biointerfaces, 2011, 83(1):122-127.
[37] SHENG G P, ZHANG M L, YU H Q. Characterization of adsorption properties of extracellular polymeric substances (EPS) extracted from sludge[J]. Colloids and Surfaces B:Biointerfaces, 2008, 62(1):83-90.
[38] LIU X M, SHENG G P, LUO H W, et al. Contribution of extracellular polymeric substances (EPS) to the sludge aggregation[J]. Environmental Science and Technology, 2010, 44(11):4355-4360.
[39] LONG G Y, ZHU P T, SHEN Y, et al. Influence of extracellular polymeric substances(EPS) on deposition kinetics of bacteria[J]. Environmental Science and Technology, 2009, 43(7):2308-2314.
[40] CLECH P L, CHEN V, FANE T A G. Fouling in membrane bioreactors used in wastewater treatment[J]. Journal of Membrane Science, 2006, 284(1/2):17-53.
[41] SANIN F D, CLARKSON W W, VESILIND P A. Sludge engineering:the treatment and disposal of wastewater sludges[M]. 1st ed. Pennsylvania:DEStech Publications Inc., 2011.
[42] MU Y, YU H Q, WANG Y. A kinetic approach to anaerobic hydrogen-producing process[J]. Water Research, 2007, 41(5):1152-1160.
[43] ABU-JDAYIL B, BANAT F, AL-SAMERAIY M. Steady rheological properties of rotating biological contactor (RBC) sludge[J]. Journal of Water Resource and Protection, 2010, 2(1):1-7.
[44] YANG F, BICH A, SHANDALOV S, et al. Yield stress and rheological characteristics of activated sludge in an airlift membrane bioreactor[J]. Journal of Membrane Science, 2009, 334(1/2):83-90.
[45] HOPPU P, GRÖNROOS A, SCHANTZ S, et al. New processing technique for viscous amorphous materials and characterization of their stickiness and deformability[J]. Enropean Journal of Pharmaceutics and Biopharmaceutics, 2009, 72(1):183-188.
[46] CHEN J S, FENG M, GONZALEZ Y, et al. Application of probe tensile method for quantitative characterization of the stickiness of fluid foods[J]. Journal of Food Engineering, 2008, 87(2):281-290.
[47] CHEN X D. Conformability of the kinetics of cohesion/stickiness development in amorphous sugar particles to the classical Arrhenius law[J]. Journal of Food Engineering, 2007, 79(2):675-680.
[48] LÉONARD A, MENESES E, TRONG E L, et al. Influence of back mixing on the convective drying of residual sludges in a fixed bed[J]. Water Research, 2008, 42(10-11):2671-2677.
[49] MA D G, ZHANG S T, LI Z Y. Control of sludge-to-wall adhesion by applying a polarized electric field[J]. Drying Technology, 2007, 25(4):639-643.
[50] DENG W Y, SU Y X. Experimental study on agitated drying kinetics of sewage sludge under the effects of different additive agents[J]. Journal of Environmental Sciences, 2014, 26(7):1523-1529.