[1] DENG R S,WEI F,JIN Y.Downer catalytic pyrolysis(DCP):a novel process for light olefins production[J]. Chemical Engineering & Technology,2002,25:711-716.
[2] 魏晓丽,龚剑洪,毛安国,等.直馏柴油催化裂化加工技术探索[J].石油炼制与化工,2016,47(12):1-6. WEI X L,GONG J H,MAO A G,et al.Exploration on catalytic cracking of straight-run middle distiliate[J]. Petroleum Processing and Petrochemicals,2016,47(12):1-6.
[3] LI L,GAO J S,XU C M,et al.Reaction behaviors and mechanisms of catalytic pyrolysis of C4 hydrocarbons[J]. Chemical Engineering Journal,2006,116:155-161.
[4] PANT K K,KUNZRU D.Catalytic pyrolysis of n-heptane on unpromoted and potassium promoted calcium aluminates[J].Chemical Engineering Journal,2002,87:219-225.
[5] JEONG S M,CHAE J H,KANG J H,et al.Catalytic pyrolysis of naphtha on the KVO3-based catalyst[J]. Catalysis Today,2002,74:257-264.
[6] MENG X H,XU C M,GAO J S,et al.Studies on catalytic pyrolysis of heavy oils:reaction behaviors and mechanistic pathways[J].Applied Catalysis A:General,2005,294:168-176.
[7] 戴厚良.烃类裂解制乙烯催化剂研究进展[J].当代石油化工,2003,11(9):9-13. DAI H L.Advances in catalyst research for ethylene production by hydrocarbon pyrolysis[J].Petroleum & Petrochemical Today,2003,11(9):9-13.
[8] 刘俊涛,滕加伟.碳五烃催化裂解制取低碳烯烃反应性能及机理[J].化学反应工程与工艺,2015,31(3):213-219. LIU J T,TENG J W.Reaction performance and mechanism for production of propylene and ethylene from C5 hydrocarbon by catalytic cracking[J].Chemical Reaction Engineering and Technology,2015,31(3):213-219.
[9] 周佩玲.深度催化裂解(DCC)技术[J].石油化工,1997,26(8):540-544. ZHOU P L.Deep catalytic cracking(DCC)technology[J]. Petrochemical Technology,1997,26(8):540-544.
[10] 钱伯章.丙烯的需求及增产丙烯的技术进展[J].石油与天然气化工,1998,27(2):92-95. QIAN B Z.Propylene demand and technical progress of propylene[J].Chemical Engineering of Oil and Gas,1998,27(2):92-95.
[11] 雒士军,闫杰,王陆,刘春辉.催化热裂解工艺及应用前景分析[J].石油规划设计,2010,21(5):14-16. LUO S J,YAN J,WANG L,et al.Catalytic pyrolysis process and its application prospect[J].Petroleum Planning & Engineering,2010,21(5):14-16.
[12] 谢朝钢,汪燮卿,郭志雄,等.催化热裂解(CPP)制取烯烃技术的开发及其工业试验[J].石油炼制与化工,2001,32(12):7-10. XIE C G,WANG X Q,GUO Z X,et al.CPP technology for olefin production and its commercial trial[J].Petroleum Processing and Petrochemicals,2001,32(12):7-10.
[13] 董国辉,许凌子,王珠海,等.催化裂解制低碳烯烃的研究及工业应用[J].广东化工,2011,38(5):30-35. DONG G H,XU L Z,WANG Z H,et al.Research and industry application of light olefins produced by catalytic cracking[J].Guangdong Chemical Industry,2011,38(5):30-35.
[14] 沙颖逊,崔中强,王明党,等.重质油裂解制烯烃的HCC工艺[J].石油化工,1999,28(9):618-621. SHA Y X,CUI Z Q,WANG M D,et al.Olefine production by heavy-oil contact cracking[J].Petrochemical Technology,1999,28(9):618-621.
[15] 赵长斌.增产丙烯工艺的方案对比[J].广州化工,2011,39(6),159-160. ZHAO C B.Scheme comparison of increasing propylene production process[J].Guangzhou Chemical Industry,2011,39(6),159-160.
[16] 茅文星.烃类催化裂解制烯烃技术[J].乙烯工业,1996,8(1):35-44. MAO W X.Catalytic pyrolysis technology of hydrocarbons to olefins[J].Ethylene Industry,1996,8(1):35-44.
[17] 陈滨.乙烯工学[M].北京:化学工业出版社,1997:407. CHEN B.Ethylene engineering[M].Beijing:Chemical Industry Press(CIP),1997:407.
[18] 张海桐,赵宣.低碳烯烃生产技术综述[J].化学工业,2014,32(6):17-21. ZHANG H T,ZHAO X.The review of light olefins production technology[J].Chemical Industry,2014,32(6):17-21.
[19] 盖希坤,田原宇,夏道宏,等.重油催化裂解技术研究进展[J].化工进展,2011,30(6):1219-1223. GAI X K,TIAN Y Y,XIA D H,et al.Progress of heavy oil catalytic cracking[J].Chemical Industry and Engineering Progress,2011,30(6):1219-1223.
[20] 姚树君.催化裂解工艺的研究与发展[J].油气田地面工程,2004,23(2):54-59. YAO S J.Research and development of catalytic pyrolysis process[J].Oil-Gasfield Surface Engineering,2004,23(2):54-59.
[21] 谢朝钢,潘仁南.重油催化热裂解制取乙烯和丙烯的研究[J].石油炼制与化工,1994,25(6):30-34. XIE C G,PAN R N.Studies on producing ethylene and propylene from heavy hydrocarbons by catalytic pyrolysis process[J].Petroleum Processing and Petrochemicals,1994,25(6):30-34.
[22] 王萍,茅文星,李德新,等.催化裂解初探[J].乙烯工业,1999,11(3):36-38. WANG P,MAO W X,LI D X,et al.The primary exploration of catalytic pyrolysis technology[J].Ethylene Industry,1999,11(3):36-38.
[23] 徐龙伢,王清遐,杨力,等.碱土金属氧化物担载Fe-MnO催化剂的CO加氢反应制低碳烯烃性能[J].燃料化学学报,1995,23(2):125-130. XU L Y,WANG Q X,YANG L,et al.The performances of light olefins production from CO hydrogenation on alkaline earth metal oxides catalyst supported Fe-MnO[J].Journal of Fuel Chemistry and Technology,1995,23(2):125-130.
[24] 程金燮,胡志彪,王科,等.我国合成气一步法制低碳烯烃催化剂研究新进展[J].化工进展,2016,35(8):2439-2445. CHEN J X,HU Z B,WANG K,et al.New advances in the catalysts for one-step light olefins production from syngas in China[J].Chemical Industry and Engineering Progress,2016,35(8):2439-2445.
[25] 谢朝钢,潘仁南,李再婷,等.石油烃的催化热裂解方法:1083092[P].1994-03-02. XIE C G,PAN R N,LI Z T,et al.Catalytic pyrolysis of petroleum hydrocarbons:1083092[P].1994-03-02.
[26] 魏飞,汤效平,周华群,等.增产丙烯技术研究进展[J].石油化工,2008,37(10):979-986. WEI F,TANG X P,ZHOU H Q,et al.Development of propylene production enhancement technology[J]. Petrochemical Technology,2008,37(10):979-986.
[27] 杨丽静,田松柏,田辉平.催化裂化多产丙烯催化剂研究进展[J].石化技术与应用,2006,24(4):319-322. YANG L J,TIAN S B,TIAN H P.Research progress of catalysts for catalytic cracking of propylene[J]. Petrochemical Technology & Application,2006,24(4):319-322.
[28] 李小明,宋芙蓉.催化裂解制烯烃的技术进展[J].石油化工,2002,31(7):569-573. LI X M,SONG F R.Advances in olefin production technology by catalytic cracking[J].Petrochemical Technology,2002,31(7):569-573.
[29] BUCHANAN J S.The chemistry of olefins production by ZSM-5 addition to catalytic cracking units[J].Catalysis Today,2000,55(3):207-212.
[30] 林世雄.石油炼制工程[M].3版.北京:石油工业出版社,2000:697. LIN S X.Petroleum refinery engineering[M].3rd ed.Beijing:Petroleum Industry Press,2000:697.
[31] AL-SHAMMARI A A,ALI S A,AL-YASSIR N,et al. Catalytic cracking of heavy naphtha-range hydrocarbons over different zeolites structures[J].Fuel Processing Technology,2014,122:12-22.
[32] WACHTER W A.Monodispersed mesoporous catalyst matrices and FCC catalysts thereof:US5051385[P].1991-09-24.
[33] MURRELL L L,Dispenziere N C.Catalysts comprising silica supported on a boehmite-like surface,their preparation and use:US4708945[P].1987-11-24.
[34] GRENOBLE D C,KIM C J,MURRELL L L,et al. Transition metal oxide acid catalysts:US4440872[P].1984-04-03.
[35] 姚楠,熊国兴,杨维慎,等.硅铝催化材料合成的新进展[J].化学进展,2000,12(4):376-384. YAO N,XIONG G X,YANG W S,et al.Process in the synthesis of silica-alumina catalyst[J].Progress in Chemistry,2000,12(4):376-384.
[36] LI C Y,LI Z T.The report of the annual meeting of the american petrochemical refiners association in 1994[C]//NPRA Annual Meeting.USA:National Petrochemical & Refiners Association,1994:57.
[37] BUCHANAN J S,ADEWUYI Y G.Effects of high temperature and high ZSM-5 additive level on FCC olefins yields and gasoline composition[J].Applied Catalysis A:General,1996,134(2):247-262.
[38] AITANI A,YOSHIKAWA T,INO T.Maximization of FCC light olefins by high severity operation and ZSM-5 addition[J].Catalysis Today,2000,60(1/2):111-117.
[39] 许昀,刘宇键,田辉平,等.高掺渣油比催化裂解催化剂RMMC-1的开发[J].石油学报(石油加工),2014,30(4):581-586. XU Y,LIU Y J,TIAN H P,et al.RMMC-1 catalyst for catalytic cracking of high residue blending portion[J].Acta Petrolei Sinica(Petroleum Processing Section),2014,30(4):581-586.
[40] DWYER F,DEGNAN T.Chapter 13 shape selectivity in catalytic cracking[J].Studies in Surface Science and Catalysis,1993,76:499-530.
[41] LI X F,SHEN B J,GUO Q X,et al.Effects of large pore zeolite additions in the catalytic pyrolysis catalyst on the light olefins production[J].Catalysis Today,2007,125:270-277.
[42] NGUYEN A D,RAWEEWAN K,SUJITRA W,et al. Light olefins and light oil production from catalytic pyrolysis of waste tire[J].Journal of Analytical and Applied Pyrolysis,2009,86:281-286.
[43] LI X F,SHEN B J,XU C M,et al.Interaction of titanium and iron oxide with ZSM-5 to tune the catalytic cracking of hydrocarbons[J].Applied Catalysis A:General,2010,375:222-229.
[44] LIU L,DENG Q F,LIU Y P,et al.HNO3-activated mesoporous carbon catalyst for direct dehydrogenation of propane to propylene[J]. Catalysis Communications,2011,16(1):81-85.
[45] DOLINSKⅡ S.Economically attractive technologies of deep conversion of associated petroleum gas[J].Russian Journal of General Chemistry,2012,81:2574-2593.
[46] XIA W,WANG F F,MU X C,et al.Catalytic performance of H-ZSM-5 zeolites for conversion of ethanol or ethylene to propylene:effect of reaction pressure and SiO2/Al2O3 ratio[J].Catalysis Communications,2017,91:62-66.
[47] 钱伯章.增产丙烯的技术进展[J].化工技术经济,2006,24(4):33-40. QIAN B Z.Technology progress of propylene production[J]. Chemical Techno-Economics,2006,24(4):33-40.
[48] 侯祥麟.中国炼油技术新进展[M].北京:中国石化出版社,1998:725. HOU X L.New development of oil refining technology in China[M]. Beijing:China Petrochemical Press,1998:725.
[49] 朱青.不同原料路线制烯烃的经济性比较[C]//亚洲炼油和石化科技大会.中国:中国石油和化学工业联合会,2017. ZHU Q.Economic comparison of different feedstock routes for olefin production[C]//Asia Downstream Technology & Markets Conference.China:China Petroleum and Chemical Industry Federation,2017.
[50] 刘学龙,鲁建春,周春艳,等.石脑油催化裂解制烯烃技术经济分析[J].石油化工,2005,34:80-81. LIU X L,LU J C,ZHOU C Y,et al.Technical and economic analysis of naphtha catalytic cracking to olefins[J]. Petrochemical Technology,2005,34:80-81.
[51] 郑铁年.催化裂解技术及其应用前景[J].石油炼制与化工,1996,27(6):37-41. ZHENG T N.Deep catalytic cracking technology and its application prospect[J].Petroleum Processing and Petrochemicals,1996,27(6):37-41. |