化工进展

• 资源与环境化工 • 上一篇    下一篇

短程蒸馏条件对废润滑油再生馏分色度的影响

吴云1,2,董玉1,张贤明1,陈国需2   

  1. 1重庆工商大学废油资源化技术与装备教育部工程研究中心,重庆 400067;2解放军后勤工程学院解放军 后勤工程学院化学工程与技术博士后流动站,重庆 401311
  • 出版日期:2014-05-05 发布日期:2014-05-05

Effects of operating parameters on chroma of cuts from waste oil in molecular distillation

WU Yun1,2,DONG Yu1,ZHANG Xianming1,CHEN Guoxu2   

  1. 1Engineering Research Centre for Waste Oil Recovery Technology and Equipment,Ministry of Education,Chongqing Technology and Business University,Chongqing 400067,China;2Logistics Engineering Institute of the People’s Liberation Army,Chemical Engineering and Technology Mobile Post-Doctoral Station,Chongqing 401311,China
  • Online:2014-05-05 Published:2014-05-05

摘要: 通过调节刮膜式分子蒸馏操作参数,考察了不同类型废油再生产品透光率的变化。实验结果表明,温度升高,一级再生油的透光率下降,二级再生油的透光率上升,废内燃机油的操作温度应控制在225℃左右,废液压油的操作温度应控制在210℃左右,废混合油的操作温度应控制在215℃左右为最佳;真空度升高,一级再生油的透光率上升,二级再生油的透光率下降,废内燃机油的真空度应控制在12Pa左右,废液压油的真空度应控制在18Pa左右,废混合油的真空度应控制在16Pa左右为最佳;进料流量增加,一级、二级再生油的透光率均缓慢下降,因此应尽量维持较低流量。

关键词: 分子蒸馏, 废润滑油, 操作参数, 馏分, 色度

Abstract: Light transmittance of base oil from different waste oil was investigated using molecular distillation with adjusted parameters. Experimental results showed that transmittance of first stage base oil decreased and transmittance of second stage base oil increased with increasing temperature. Optimal temperature for waste machine oil was 225℃,210℃ for waste hydraulic fluid,and 215℃ for waste mixed oil. Transmittance of first stage base oil increased and transmittance of second stage base oil decreased with increasing vacuum. Optimal pressure for waste machine oil was 12Pa,18Pa for waste hydraulic fluid and 16Pa for waste mixed oil. When flow increased,transmittance of first stage and second stage base oil decreased accordingly.

Key words: molecular distillation, waste oil, operating parameter, cuts, chroma

京ICP备12046843号-2;京公网安备 11010102001994号
版权所有 © 《化工进展》编辑部
地址:北京市东城区青年湖南街13号 邮编:100011
电子信箱:hgjz@cip.com.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn