[1] Charoensawan Piyanun,Khandekar Sameer,Groll Manfred,et al. Closed loop pulsating heat pipes. Part A:Parametric experimental investigations[J]. Applied Thermal Engineering,2003,23(16):2009-2020.[2] Saha Nandan,Das P K,Sharma P K. Influence of process variables on the hydrodynamics and performance of a single loop pulsating heat pipe[J]. International Journal of Heat and Mass Transfer,2014,74:238-250.[3] Nine Md J,Tanshen Md Riyad,Munkhbayar B,et al. Analysis of pressure fluctuations to evaluate thermal performance of oscillating heat pipe[J]. Energy,2014,70:135-142.[4] Khandekar Sameer,Gautam Anant Prasad,Sharma Pavan K. Multiple quasi-steady states in a closed loop pulsating heat pipe[J]. International Journal of Thermal Sciences,2009,48(3):535-546.[5] Liu Xiangdong,Chen Yongping,Shi Mingheng. Dynamic performance analysis on start-up of closed-loop pulsating heat pipes (CLPHPs)[J]. International Journal of Thermal Sciences,2013,65:224-233.[6] 胡建军,徐进良. 汞-水混合工质脉动热管实验研究[J]. 化工学报,2008,59(5):1083-1090.[7] 王迅,李达,李云昭. 甲醇水溶液脉动热管的传热特性[J]. 化工进展,2014,33(12):3170-3175.[8] 史维秀. 改进型回路脉动热管可视化及传热性能研究[D]. 天津:天津大学环境科学与工程学院,2012.[9] 王磊. 振荡热管启动和传热极限的实验研究[D]. 天津:天津大学机械工程学院,2010.[10] 王宇,李惟毅. 充液率对单环路脉动热管启动运行的影响[J]. 中国电机工程学报,2011,31(7):79-85.[11] 韩同. 脉动热管的启动和运行性能及其可视化研究[D]. 天津:天津大学机械工程学院,2011.[12] Xue Zhihu,Qu Wei,Xie Minghui. Full visualization and startup performance of an ammonia pulsating heat pipe[J]. Propulsion and Power Research,2013,2(4):263-268.[13] Sarangi R K,Rane M V. Experimental investigations for start up and maximum heat load of closed loop pulsating heat pipe[J]. Procedia Engineering,2013,51:683-687.[14] Zhu Yue,Cui Xiaoyu,Han Hua,et al. The study on the difference of the start-up and heat-transfer performance of the pulsating heat pipe with water-acetone mixtures[J]. International Journal of Heat and Mass Transfer,2014,77:834-842.[15] Qu W,Ma H B. Theoretical analysis of startup of a pulsating heat pipe[J]. International Journal of Heat and Mass Transfer,2007,50(11-12):2309-2316.[16] Yang Xinshe,Tao Luan. Modelling of a pulsating heat pipe and startup asymptotics[J]. Procedia Computer Science,2012,9:784-791.[17] 胡朝发,贾力. 脉动热管气液塞振荡运动模型[J]. 化工学报,2011,62(s1):113-117.[18] 苏磊,张红. 回路型脉动热管稳定运行传热模型的建立及分析[J]. 化工学报,2008,59(11):2718-2725.[19] Brackbill J U,Kothe D B,Zemach C. A continuum method for modeling surface tension[J]. Journal of Computational Physics,1992,100:335-354.[20] 张育民. 基于CFD的热管两相流数学模型与数值模拟[D]. 广州:华南理工大学机械与汽车工程学院,2014. |