[1] He Yaling, Zhang Yuwen.Advances and outlooks of heat transfer enhancement by longitudinal vortex generators[J]. Advances in Heat Transfer, 2012, 44: 119-185.[2] Bergles A E.ExHFT for fourth generation heat transfer technology[J].Experimental Thermal and Fluid Science, 2002, 26(2): 335-344.[3] Huisseune Henk,T'Joen Christophe, De Jaeger Peter, et al.Performance enhancement of a louvered fin heat exchanger by using delta winglet vortex generators[J].International Journal of Heat and Mass Transfer, 2013, 56: 475-487.[4] Cheng Z D, He Y L, Cui F Q.Numerical study of heat transfer enhancement by unilateral longitudinal vortex generators inside parabolic trough solar receivers[J]. International Journal of Heat and Mass Transfer, 2012, 55(21): 5631-5641.[5] Kukulka D J, Smith R.Thermal-hydraulic performance of Vipertex 1EHT enhanced heat transfer tubes[J].Applied Thermal Engineering, 2013, 61(1): 60-66.[6] Chen Y, Fiebig M, Mitra N K.Heat transfer enhancement of a finned oval tubes with staggered punched longitudinal vortex generators[J].International Journal of Heat and Mass Transfer, 2000, 43(3): 417-435[7] Habchi C, Russeil S, Bougeard D, et al.Enhancing heat transfer in vortex generator-type multifunctional heat exchangers[J].Applied Thermal Engineering, 2012, 38: 14-25.[8] Caliskan S.Experimental investigation of heat transfer in a channel with new winglet-type vortex generators[J]. International Journal of Heat and Mass Transfer, 2014, 78: 604-614.[9] 何雅玲, 楚攀, 谢涛.纵向涡发生器在管翅式换热器中的应用及优化[J].化工学报, 2012, 63(3): 746-760.[10] 楚攀, 何雅玲, 田丽亭, 等.纵向涡强化换热的优化设计及机理分析[J].动力工程, 2009 (12): 1123-1128.[11] Tian Liting, He Yaling, Tao Yubing, et al.A comparative study on the air-side performance of wavy fin-and-tube heat exchanger with punched delta winglets in staggered and in-line arrangements[J].International Journal of Thermal Sciences, 2009, 48(9): 1765-1776.[12] 杨泽亮, 吴欣颖.纵向涡强化竖直平板自然对流换热的数值模拟 [J].华南理工大学学报: 自然科学版, 2006, 34(12): 115-119.[13] Song W M, Meng J A, Li Z X.Numerical study of air-side performance of a finned flat tube heat exchanger with crossed discrete double inclined ribs[J].Applied Thermal Engineering, 2010, 30(13): 1797-1804.[14] 王令, 陈秋炀, 曾敏, 等.矩形窄通道内带纵向涡发生器的传热强化[J].化工学报, 2007, 58(11): 2549-2553.[15] 车翠翠, 田茂诚.圆管内置梯形翼片的流场特性PIV实验[J].化工学报, 2013, 64(11): 3976-3984.[16] 陶文铨.数值传热学 [M].西安:西安交通大学出版社,2003: 347-360.[17] Meng J A, Liang X G, Chen Z J, et al.Experimental study on convective heat transfer in alternating elliptical axis tubes[J].Experimental Thermal and Fluid Science, 2005, 29(4): 457-465.[18] 李军.多种强化传热管的强化传热性能与流阻性能研究[D]. 广州: 华南理工大学, 2000.[19] Webb R L.Principles of Enhanced Heat Transfer[M].New York:John Wiley & Sons, 1994.[20] Fan J F, Ding W K, Zhang J F, et al.A performance evaluation plot of enhanced heat transfer techniques oriented for energy-saving[J].International Journal of Heat and Mass Transfer, 2009, 52(1): 33-44. |