化工进展 ›› 2016, Vol. 35 ›› Issue (02): 581-585.DOI: 10.16085/j.issn.1000-6613.2016.02.038

• 精细化工 • 上一篇    下一篇

乌桕籽油制备环氧脂肪酸异辛酯的工艺

李科1, 陈洁1, 蒋剑春1,2, 聂小安1,2, 黄金瑞1, 陈水根1, 封其志3   

  1. 1 中国林业科学研究院林产化学工业研究所, 生物质化学利用国家工程实验室, 国家林业局林产化学工程重点开放性实验室, 江苏省生物质能源与材料重点实验室, 江苏 南京 210042;
    2 中国林业科学研究院 林业新技术研究所, 北京 100091;
    3 南京林业大学南方学院, 江苏 南京 210037
  • 收稿日期:2015-07-07 修回日期:2015-07-24 出版日期:2016-02-05 发布日期:2016-02-05
  • 通讯作者: 李科(1985-),男,助理研究员,主要从事生物质资源利用及精细化学品开发研究。E-mail:liketaiping@163.com。
  • 作者简介:李科(1985-),男,助理研究员,主要从事生物质资源利用及精细化学品开发研究。E-mail:liketaiping@163.com。
  • 基金资助:
    中央级公益性科研院所基本科研业务费专项(CAFYBB2014 MA011)、国家科技支撑计划(2014BAD17B01、2015BAD15B08)及江苏省生物质绿色燃料与化学品重点实验室(JSBGFU14007)项目。

Preparation of epoxy stillingia oil fatty acid isooctyl ester plasticizer

LI Ke1, CHEN Jie1, JIANG Jianchun1,2, NIE Xiao'an1,2, HUANG Jinrui1, CHEN Shuigen1, FENG Qizhi3   

  1. 1 Institute of Chemical Industry of Forestry Products, CAF, National Engineering Lab.for Biomass Chemical Utilization, Key and Open Lab on Forest Chemical Engineering, SFA, Nanjing 210042, Jiangsu, China;
    2 Institute of New Technology of Forest, CAF, Beijing 100091, China;
    3 Nanfang College of Nanjing Forestry University, Nanjing 210037, Jiangsu, China
  • Received:2015-07-07 Revised:2015-07-24 Online:2016-02-05 Published:2016-02-05

摘要: 选用具有丰富不饱和键的乌桕籽油为原料,采用了水解、酯化、环氧化等一系列反应合成了环保型增塑剂环氧脂肪酸异辛酯。并通过正交试验研究了脂肪酸异辛酯的环氧化工艺,确定了合成最佳工艺为:每百克脂肪酸异辛酯,甲酸30.37g,双氧水131.49g,反应温度65℃,反应4h后环氧值可达5.71。通过红外确定了产物的构成并考察了拉伸、热稳定性等性能,结果表明环氧脂肪酸异辛酯较邻苯二甲酸二辛酯(DOP)具有更好的热稳定性和挥发迁移性。

关键词: 环氧脂肪酸异辛酯, 增塑剂, 乌桕籽油, 塑料助剂

Abstract: Using stillingia oil which has abundant unsaturated bond as raw material,,we synthesized the environmental friendly plasticizer epoxy fatty acid isooctyl ester(epoxy stillingia oil fatty acid isooctyl ester) through a series of reactions of hydrolysis,esterification and epoxidation. The optimal synthetic process of epoxy stillingia oil fatty acid isooctyl ester from fatty acid isooctyl ester was determined by orthogonal experiments. The optimal conditions are,formic acid 30.37g and H2O2131.49g per hundred grams fatty acid isooctyl ester,reaction temperature 65℃ and reaction time 4h,with which the epoxy value could reach 5.71. The functional groups of the product was determined by IR,and the tensile,thermal stability and other performance were also tested. The results showed that the epoxy fatty acid isooctyl ester had better thermal stability and volatile mobility than DOP.

Key words: epoxy fatty acid isooctyl ester, plasticize, stillingia oil, plastic additive

中图分类号: 

京ICP备12046843号-2;京公网安备 11010102001994号
版权所有 © 《化工进展》编辑部
地址:北京市东城区青年湖南街13号 邮编:100011
电子信箱:hgjz@cip.com.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn