1 |
DAS T, SAIKIA B, DUTTA D K, et al. Agglomerraion of low rank Indian coal fines with an organic binder and the thermal behavior of the agglomerate produced: Part 1[J]. Fuel, 2015, 147: 269-278.
|
2 |
邢相栋, 王莎, 张秋利,等. 废塑料与兰炭混合燃烧动力学分析[J]. 煤炭转化, 2019, 42(4): 50-57.
|
|
XING Xiangdong, WANG Sha, ZHANG Qiuli, et al. Kinetic analysis of mixed combustion of waste plastics and semi-coke[J]. Coal Conversion, 2019, 42(4): 50-57.
|
3 |
LIU S J, SHANGGUAN J, YANG S, et al. Producing effective and clean coke for household combustion activities to reduce gaseous pollutant emissions[J]. Journal of Chemistry, 2019(3): 1-12.
|
4 |
杜文广. 民用洁净焦炭制备和煤气组成调制关键技术研究[D]. 太原: 太原理工大学, 2017.
|
|
DU Wenguang. Study on the key technologies for the preparation of civil clean coke and adjustment of coke oven gas composition[D]. Taiyuan: Taiyuan University of Technology, 2017.
|
5 |
王东升. 神华煤中度加氢增塑的基础研究[D]. 北京: 煤炭科学研究总院, 2007.
|
|
WANG Dongsheng. The basic study on Shenhua coal’s moderate hydrogenation to increase plasticity[D]. Beijing: China Coal Research Institute CCRI, 2007.
|
6 |
王继伟, 王浩, 刘定桦, 等. 长焰煤型煤复合粘结剂的研究[J]. 江西煤炭科技, 2015(1): 81-83.
|
|
WANG Jiwei, WANG Hao, LIU Dinghua, et al. Research on compound binder of long flame coal briquette[J]. Jiangxi Coal Science & Technology, 2015(1): 81-83.
|
7 |
郭振坤, 荣令坤, 张金山. 腐殖酸对型煤成型的影响研究[J]. 中国胶粘剂, 2017, 26(6): 43-45.
|
|
GUO Zhenkun, RONG Lingkun, ZHANG Jinshan. Study on influences of humic acid on briquette molding[J]. China Adhesives, 2017, 26(6): 43-45.
|
8 |
张秋利, 姚蓉, 周军, 等. 淀粉类黏结剂对型煤与型焦强度的影响[J]. 煤炭转化, 2015, 38(2): 66-69.
|
|
ZHANG Qiuli, YAO Rong, ZHOU Jun, et al. Effect of starch binder on coal and coke strength[J]. Coal Conversion, 2015, 38(2): 66-69.
|
9 |
崔帅, 吕武华. 聚乙烯醇对型煤热解的影响研究[J]. 四川大学学报(自然科学版), 2017, 54(6): 1269-1274.
|
|
CUI Shuai, Wuhua LYU. Effect of polyvinyl alcohol on pyrolysis of briquette[J]. Journal of Sichuan University(Natural Science Edition), 2017, 54(6): 1269-1274.
|
10 |
FERNÁNDEZ A M, BARRIOCANAL C, DÍEZ M A, et al. Evaluation of bituminous wastes as coal fluidity enhancers[J]. Fuel, 2012, 101:45-52.
|
11 |
ALVAREZ R, PIS J J, DÍEZ M A, et al. A semi-industrial scale study of petroleum coke as an additive in coke making[J]. Fuel Processing Technology, 1998, 55(2): 129-141.
|
12 |
ELLISON G, STANMORE B R. High strength binderless brown coal briquettes Part I. Production and properties[J]. Fuel Processing Technology, 1981, 4: 277-289.
|
13 |
中国国家标准化管理委员会. 焦炭机械强度的测定方法: [S]. 北京: 中国标准出版社, 2008.
|
|
Standardization Administration of the People’s Republic of China. Coke for metallurgy-determination of mechanical strength: [S].Beijing: Standards Press of China, 2008.
|
14 |
SUN B L, YU J L, TAHMASEBI A, et al. An experimental study on binderless briquetting of Chinese lignite: effects of briquetting conditions[J]. Fuel Processing Technology, 2014, 124: 243-248.
|
15 |
MIURA K, MAE K, LI W, et al. Estimation of hydrogen bond distribution in coal through the analysis of OH stretching bands in diffuse reflectance infrared spectrum measured by in-situ technique[J]. Energy & Fuels, 2001, 15: 599-610.
|
16 |
LI J, YANG J L, LIU Z Y. Hydro-treatment of a direct coal liquefaction residue and its components[J]. Catalysis Today, 2008, 130(2/3/4):389-394.
|
17 |
RIVA L, NIELSEN H K, SKREIBERG Ø, et al. Analysis of optimal temperature, pressure and binder quantity for the production of biocarbon pellet to be used as a substitute for coke[J]. Applied Energy, 2019, 256: 113933.
|
18 |
LI X H, LI L L, LI B F, et al. Product distribution and interactive mechanism during Co-pyrolysis of a subbituminous coal and its direct liquefaction residue[J]. Fuel, 2017, 199: 372-379.
|
19 |
李春燕, 江鑫. 炼焦煤胶质层指数检测影响因素的分析与管控[J].包钢科技, 2018, 44(5): 28-31.
|
|
LI Chunyan, JIANG Xin. Analysis and control for influence factors of testing gelatinous layer index of coking coal[J]. Science & Technology of Baotou Steel, 2018, 44(5): 28-31.
|