化工进展 ›› 2016, Vol. 35 ›› Issue (03): 826-830.DOI: 10.16085/j.issn.1000-6613.2016.03.027

• 工业催化 • 上一篇    下一篇

负载型杂多酸脱除焦化蜡油中碱性氮化物

李红跃, 王雷, 张曼, 刘宝玉, 王立新, 刘丹   

  1. 辽宁石油化工大学化学化工与环境学部, 辽宁 抚顺 113001
  • 收稿日期:2015-07-13 修回日期:2015-10-30 出版日期:2016-03-05 发布日期:2016-03-05
  • 通讯作者: 王雷,教授,现从事清洁燃料生产方向研究。E-mail:young4312@163.com.
  • 作者简介:李红跃(1989-),女,硕士研究生。E-mail:li.hongyue.2008@163.com.
  • 基金资助:

    国家自然科学基金(21103077)、辽宁省自然科学基金(201102120)及中海石油炼化有限责任公司惠州炼化分公司项目(20140005).

Removal of basic nitrogen compounds in coker gas oil by supported heteropoly acid

LI Hongyue, WANG Lei, ZHANG Man, LIU Baoyu, WANG Lixin, LIU Dan   

  1. College of Chemistry, Chemical Engineering and Environmental Engineering, Liaoning Shihua University, Fushun 113001, Liaoning, China
  • Received:2015-07-13 Revised:2015-10-30 Online:2016-03-05 Published:2016-03-05

摘要: 以硅胶为载体,利用等体积浸渍法负载杂多酸制备3种不同负载型杂多酸吸附剂,采用傅里叶红外光谱和氮气吸附-脱附法对吸附剂负载状态进行了表征。将制备的负载型吸附剂用于焦化蜡油中碱性氮化物的脱除,考察了负载量、反应时间、反应温度和剂油质量比对焦化蜡油脱氮率的影响。结果表明,磷钨酸负载质量分数为40%、反应温度为50℃、反应时间为50min、剂油质量比为1:4的条件下,负载型杂多酸吸附剂能有效脱除焦化蜡油中的碱性氮化物,脱氮率达到89.07%,脱氮油收率达95.54%.

关键词: 负载, 杂多酸, 吸附, 碱性氮化物

Abstract: Three different heteropoly acid adsorbents were prepared with silica gel as support by impregnation method and characterized by infrared spectrum and N2 adsorption-desorption methods. The supported adsorbents were used for the removal of basic nitrogen compounds in CGO. The optimum conditions for denitrification of CGO were studied by examining the effect of reaction time,reaction temperature,oil ratio and loading mass. It was shown that when phosphotungstic acid loading mass was 40%,the reaction temperature was 50℃,the reaction time was 50min and mass ratio of adsorbent to oil was 1:4,Best performance of the adsorbent was observed,with a denitrification rate of 89.07% and a denitrification oil yield of 95.54%.

Key words: support, heteropoly acid, adsorption, basic nitrogen compounds

中图分类号: 

京ICP备12046843号-2;京公网安备 11010102001994号
版权所有 © 《化工进展》编辑部
地址:北京市东城区青年湖南街13号 邮编:100011
电子信箱:hgjz@cip.com.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn