化工进展

• 工业催化 • 上一篇    下一篇

CeO2的添加对MnOx/ACFN催化剂脱除NOx性能影响

厉 励1,黄华存2,韦藤幼1,孙建华1,童张法1   

  1. 1广西大学化学化工学院,广西 南宁 530004;2广西大学环境学院,广西 南宁 530004
  • 出版日期:2013-11-05 发布日期:2013-11-05

Influence of cerium additive on selective catalytic reduction of NOx with MnOx/ACFN catalyst

LI Li1,HUANG Huacun2,WEI Tengyou1,SUN Jianhua1,TONG Zhangfa1   

  1. 1School of Chemistry and Chemical Engineering,Guangxi University,Nanning 530004,Guangxi,China;2School of Environment,Guangxi University,Nanning 530004,Guangxi,China
  • Online:2013-11-05 Published:2013-11-05

摘要: 以经过硝酸改性后的活性炭纤维(ACFN)为载体,采用等体积浸渍法制备了MnOx/ACFN催化剂。测试了其在以氨气为还原剂的低温选择性催化还原(SCR)过程中的催化活性,并考察了活性组分MnOx的负载量、金属氧化物CeO2的复合负载方法及负载量对催化剂脱硝活性的影响。同时运用XRD和SEM对催化剂理化特性进行表征。结果表明,采用共沉淀法添加CeO2、总负载量为15%、且铈与锰的物质的量比为3∶2、反应温度为200 ℃时,催化剂的活性最高,对NOx的去除率达到92.2%。

关键词: 氮氧化物, 锰氧化物, 二氧化铈, 活性碳纤维, 选择性催化还原

Abstract: Manganese catalysy supported on activated carbon fibers modified by nitric acid (MnOx/ACFN) was prepared by the method of impregnation. The activity of MnOx/ACFN catalyst was tested for selective catalytic reduction (SCR) of NO with ammonia at low-temperature. The effects of manganese content and the methods and content of cerium loading for improving the denitration activity of MnOx/ACFN catalyst were investigated. The physical and chemical characteristics of these catalysts were studied with X-ray diffraction (XRD) and scanning electron microscope (SEM). The most active catalyst with the highest conversion of NOx of 92.2% was prepared under the conditions of adding CeO2 by co-precipitation,total loading of MnOx and CeO2 15%,molar ratio of cerium to manganese 3∶2,reaction temperature 200 ℃.

Key words: nitrogen oxides, MnOx, CeO2, activated carbon fibers, selective catalytic reduction

京ICP备12046843号-2;京公网安备 11010102001994号
版权所有 © 《化工进展》编辑部
地址:北京市东城区青年湖南街13号 邮编:100011
电子信箱:hgjz@cip.com.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn