化工进展 ›› 2021, Vol. 40 ›› Issue (9): 5097-5106.DOI: 10.16085/j.issn.1000-6613.2021-0346

• • 上一篇    下一篇

共沉淀法制备高镍氧化物正极材料前体研究进展

王志鸿(), 朱华威, 余海峰, 江浩(), 李春忠   

  1. 华东理工大学材料科学与工程学院超细材料制备与应用教育部重点实验室,上海 200237
  • 收稿日期:2021-02-19 修回日期:2021-05-21 出版日期:2021-09-05 发布日期:2021-09-13
  • 通讯作者: 江浩
  • 作者简介:王志鸿(1995—),男,博士研究生,研究方向为高镍正极材料的制备与改性。E-mail: 1468251213@qq.com
  • 基金资助:
    国家自然科学基金(21975074)

Research process on the synthesis of Ni-rich oxide cathode precursors by co-precipitation method

WANG Zhihong(), ZHU Huawei, YU Haifeng, JIANG Hao(), LI Chunzhong   

  1. Key Laboratory for Ultrafine Materials of Ministry of Education, School of Materials Science and Engineering, East China University of Science and Technology, Shanghai 200237, China
  • Received:2021-02-19 Revised:2021-05-21 Online:2021-09-05 Published:2021-09-13
  • Contact: JIANG Hao

摘要:

高镍氧化物正极材料(Ni质量分数≥0.8)具有高比容量、高压实密度、低成本等优势,能够满足下一代动力电池低钴和高能量密度的需求。其中,氢氧化物前体的尺寸、球形度、粒度分布以及纳米片堆积方式等直接影响最终产品的性能。共沉淀法是目前普遍采用的商业化制备氢氧化物前体的途径。在合成过程中,反应体系溶液的pH、氨水浓度、进料速度等影响产物沉淀速率和产品质量,而反应釜的结构优化有助于提高溶液的混合、热质传递等。本文结合共沉淀反应工艺参数的理论计算,介绍了制备高镍氧化物正极材料前体连续搅拌反应器系统(CSTR)的结构设计原理,总结了合成工艺参数对前体成核生长、微结构的影响规律,介绍了共沉淀法制备优质前体的关键因素。最后,通过分析我国高镍氧化物前体的市场现状,展望了共沉淀法制备前体的未来发展趋势。

关键词: 共沉淀法, 高能量密度, 连续搅拌反应器, 过程强化, 高镍正极材料

Abstract:

Ni-rich (Ni≥0.8) oxide cathode materials can satisfy the demands of high energy density and low cobalt for next-generation power batteries due to their large reversible capacity, high compaction density and low cost. The electrochemical performance of Ni-rich cathode materials is directly affected by the size, sphericity, size distribution and sub-nanoplate stacking of the hydroxide precursor, which is commonly produced by the means of co-precipitation method in commercialization. During the synthesis process, the pH, ammonia concentration and feeding rate affect the precipitation rate and the final product quality. The optimization design of the reactor could improve the mixing of the reactants and enhance the heat and mass transfer. Combining with the theoretical calculation of the co-precipitation reaction process parameters, this review summarized the structure design principle of the continuous stirred tank reactor(CSTR) and the influence rule of key synthesis parameters on nucleation growth and microstructure of precursors. Finally, the improvement trend of precursor in the future was prospected by analyzing the current market situations of Ni-rich (Ni≥0.8) oxide cathodes.

Key words: co-precipitation, high energy density, continuous stirred tank reactor, process reinforcement, Ni-rich cathode material

中图分类号: 

京ICP备12046843号-2;京公网安备 11010102001994号
版权所有 © 《化工进展》编辑部
地址:北京市东城区青年湖南街13号 邮编:100011
电子信箱:hgjz@cip.com.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn