基于液体弥散理论的规整填料塔液体扩散数值模拟

doi:10.16085/j.issn.1000-6613.2017.03.008

化工进展 ›› 2017, Vol. 36 ›› Issue (03): 823-831.DOI: 10.16085/j.issn.1000-6613.2017.03.008

基于液体弥散理论的规整填料塔液体扩散数值模拟

张梦娴, 李玉星, 韩辉, 朱建鲁, 常学煜

山东省油气储运安全省级重点实验室, 中国石油大学(华东)储运与建筑工程学院, 山东青岛 266580

收稿日期:2016-07-16 修回日期:2016-11-01 出版日期:2017-03-05 发布日期:2017-03-05
通讯作者: 李玉星,教授,博士生导师。
作者简介:张梦娴(1991-),女,硕士研究生,主要从事FLNG预处理关键技术研究。E-mail:zhangmx_125@163.com。
基金资助:
国家自然科学基金（51504278）、山东省优秀中青年科学家科研奖励基金（BS2014ZZ009）、青岛市应用基础研究计划（14-2-4-81-jch）及中央高校基本科研业务费专项资金（16CX02003A）项目。

Numerical simulations of liquid spreading in structured packed column based on liquid dispersion

ZHANG Mengxian, LI Yuxing, HAN Hui, ZHU Jianlu, CHANG Xueyu

College of Pipeline and Civil Engineering, China University of Petroleum, Provincial Key Laboratory of Oil and Gas Storage and Transportation Safety in Shandong Province, Qingdao 266580, Shandong, China

Received:2016-07-16 Revised:2016-11-01 Online:2017-03-05 Published:2017-03-05

摘要/Abstract

摘要：

规整填料塔内液体弥散规律的研究对于气液吸收塔的布液装置设计、填料高度确定以及填料类型优选具有重要理论意义，目前关于液体弥散机理的理论描述和模型建立较为有限，本文为实现填料塔内液体扩散现象的准确预测，引入液体弥散机理。规整填料采用多孔介质简化，在考虑了机械弥散力、气液拖曳力、多孔介质阻力等基础上建立了二维CFD模型，模拟结果与实验结果吻合较好。在此基础上研究了液体扩散系数S、气体入口速度和液体入口速度对液体分布的影响。通过研究得出液体弥散机理中毛细管弥散作用影响较小，主要以机械弥散作用为主；液体扩散系数和液体入口速度对液体分布的影响显著，S/D_r的最佳比例为2，气体入口速度对液体分布影响很小。研究结果对其他类型填料的模拟研究有重要借鉴作用。

关键词: 规整填料, 气液两相流, 液体弥散, 扩散系数, 多孔介质, 数值模拟

Abstract:

It is of great theoretical importance to study on liquid dispersion in structured packed columns in the design of liquid distributing devices,the height of the packed beds and the optimum choice of packing types. However,the theoretical description and mathematical model about liquid dispersion are limited. In order to predict liquid spreading in packed column accurately,the liquid dispersion mechanism was introduced. The porous media model was used to simplify the complex structured packing geometry to a homogeneous porous material and a 2D axisymmetric CFD model considering mechanical dispersion force,inter-phase drag force and porous resistance force was presented. The numerical simulations were in good agreement with the experimental results. Then,the effects of liquid spreading factor S,gas inlet velocity and liquid inlet velocity on liquid flow distribution were analyzed. Mechanical dispersion played a key role in liquid dispersion and capillary dispersion can be neglected. Liquid spreading factor and liquid inlet velocity were crucial to liquid distribution in packed columns and the best radio S/D_r was 2. However,gas inlet velocity will not impact liquid distribution in packed column. This study demonstrated its great importance in the numerical simulations in structured packed columns filled with other packing types.

Key words: structured packing, gas-liquid flow, liquid dispersion, spreading factor, porous media, numerical simulation

中图分类号:

TQ021.1

张梦娴, 李玉星, 韩辉, 朱建鲁, 常学煜. 基于液体弥散理论的规整填料塔液体扩散数值模拟[J]. 化工进展, 2017, 36(03): 823-831.

ZHANG Mengxian, LI Yuxing, HAN Hui, ZHU Jianlu, CHANG Xueyu. Numerical simulations of liquid spreading in structured packed column based on liquid dispersion[J]. Chemical Industry and Engineering Progress, 2017, 36(03): 823-831.

参考文献

[1] FOURATI M,ROIG V,RAYNAL L. Experimental study of liquid spreading in structured packings[J]. Chemical Engineering Science, 2012,80(10):1-15.
[2] HOEK P J,WESSELINGH J A,ZUIDERWEG F J. Small scale and large scale liquid maldistribution in packed columns[J]. Chemical Engineering Research & Design,1986,64(6):431-449.
[3] ONDA K,TAKEUCHI H,MAEDA Y,et al. Liquid distribution in a packed column[J]. Chemical Engineering Science,1973,28(9):1677-1683.
[4] BEMER G G, ZUIDERWEG F J. Radial liquid spread and maldistribution in packed columns under different wetting conditions[J]. Chemical Engineering Science,1978,33(12):1637-1643.
[5] BALDI G,SPECCHIA V. Distribution and radial spread of liquid in packed towers with two-phase concurrent flow:effect of packing shape and size[J]. Quaderni Dell'Ingegnere Chimico Italiano,1976, 12:107-111.
[6] 张会书,袁希钢,KALBASSI Mohammad Ali. 规整填料内液体分布的实验研究进展[J]. 化工进展,2015,34(8):2932-2939. ZHANG H S,YUAN X G,KALBASSI M A. Research progress of liquid distribution in structured packing[J]. Chemical Industry and Engineering Progress,2015,34(8):2932-2939.
[7] EDWARDS D P,KRISHNAMURTHY K R,POTTHOFF R W. Development of an improved method to quantify maldistribution and its effect on structured packing column performance[J]. Chemical Engineering Research & Design,1999,77(7):656-662.
[8] OLUJIC ?,BAAK R V,HAARING J,et al. Liquid distribution properties of conventional and high capacity structured packings[J]. Chemical Engineering Research & Design,2006,84(10):867-874.
[9] LAPPALAINEN K,MANNINEN M,ALOPAEUS V. CFD modelling of radial spreading of flow in trickle-bed reactors due to mechanical and capillary dispersion[J]. Chemical Engineering Science,2009,64(2):207-218.
[10] LAPPALAINEN K,MANNINEN M,ALOPAEUS V,et al. An analytical model for capillary pressure-saturation relation for gas-liquid system in a packed-bed of spherical particles[J]. Transport in Porous Media,2009,77(1):17-40.
[11] MEWES D,LOSER T,MILLIES M. Modelling of two-phase flow in packings and monoliths[J]. Chemical Engineering Science,1999,54(21):4729-4747.
[12] 张雪. 规整填料塔内流体力学行为模拟研究[D]. 天津:天津大学, 2007. ZHANG X. Study on simulation of fluid dynamic in structured packed tower[D]. Tianjin:Tianjin University,2007.
[13] 周建军. 基于CFD的规整填料塔流场分析[D]. 南昌:南昌大学, 2010. ZHOU J J. Flow field analysis of packed tower based on CFD[D]. Nanchang:Nanchang University,2010.
[14] 靳亚斌. 基于CFD的均流填料塔数值模拟[D]. 西安:西安石油大学,2013. JIN Y B. Numerical simulation on symmetrical-flow packed column based on CFD[D]. Xi'an:Xi'an Shiyou University,2013.
[15] 冯换春. 填料塔内两相流动与相界面传质的数值模拟研究[D]. 西安:西安建筑科技大学,2014. FENG H C. The numerical simulation study about the two phase flow dynamics and mass transfer in the packed column[D]. Xi'an:Xi'an University of Architecture and Technology,2014.
[16] 谭丽媛,袁希钢,KALBASSI Mohammad Ali. 规整填料表面液体分布的计算流体力学[J]. 化工进展,2015,34(9):3221-3231. TAN L Y,YUAN X G,KALBASSI M A. Computational fluid dynamics study of liquid distribution on structured packing surface[J]. Chemical Industry and Engineering Progress,2015,34(9):3221-3231.
[17] 谭丽媛,袁希钢,KALBASSI Mohammad Ali. 规整填料结构对液相分布影响的计算流体力学[J]. 化工进展,2015,34(11):3869-3878. TAN L Y,YAN X G,KALBASSI M A. Effect of structured packing's structure on liquid distribution by computational fluid dynamics[J]. Chemical Industry and Engineering Progress,2015,34(11):3869-3878.
[18] JIANG Y,KHADIKAR M R,AL-DAHHAN M H,et al. Two-phase flow distribution in 2D trickle-bed reactors[J]. Chemical Engineering Science,1999,54(13/14):2409-2419.
[19] ATTOU A,FERSCHNEIDER G. A two-fluid hydrodynamic model for the transition between trickle and pulse flow in a cocurrent gas-liquid packed-bed reactor[J]. Chemical Engineering Science, 2000,55(3):491-511.
[20] BOYER C,KOUDIL A,CHEN P,et al. Study of liquid spreading from a point source in a trickle bed via gamma-ray tomography and CFD simulation[J]. Chemical Engineering Science,2005,60(22):6279-6288.
[21] WHITAKER S. Flow in porous media II:the governing equations for immiscible,two-phase flow[J]. Transport in Porous Media,1986,1(2):105-125.
[22] LIU S,LONG J. Gas-liquid countercurrent flows through packed towers[J]. Journal of Porous Media,2000,3(2):99-113.
[23] LAPPALAINEN K,GORSHKOVA E,MANNINEN M,et al. Characteristics of liquid and tracer dispersion in trickle-bed reactors:effect on CFD modeling and experimental analyses[J]. Computers & Chemical Engineering,2011,35(1):41-49.
[24] FOURATI M,ROIG V,RAYNAL L. Liquid dispersion in packed columns:experiments and numerical modeling[J]. Chemical Engineering Science,2013,100:266-278.

基于液体弥散理论的规整填料塔液体扩散数值模拟

Numerical simulations of liquid spreading in structured packed column based on liquid dispersion

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	王太, 苏硕, 李晟瑞, 马小龙, 刘春涛. 交流电场中贴壁气泡的动力学行为[J]. 化工进展, 2023, 42(S1): 133-141.
[2]	赵晨, 苗天泽, 张朝阳, 洪芳军, 汪大海. 负压状态窄缝通道乙二醇水溶液传热特性[J]. 化工进展, 2023, 42(S1): 148-157.
[3]	陈匡胤, 李蕊兰, 童杨, 沈建华. 质子交换膜燃料电池气体扩散层结构与设计研究进展[J]. 化工进展, 2023, 42(S1): 246-259.
[4]	郭强, 赵文凯, 肖永厚. 增强流体扰动强化变压吸附甲硫醚/氮气分离的数值模拟[J]. 化工进展, 2023, 42(S1): 64-72.
[5]	李宁, 李金科, 董金善. 乙烯裂解炉多孔介质燃烧器的研究与开发[J]. 化工进展, 2023, 42(S1): 73-83.
[6]	邵博识, 谭宏博. 锯齿波纹板对挥发性有机物低温脱除过程强化模拟分析[J]. 化工进展, 2023, 42(S1): 84-93.
[7]	刘炫麟, 王驿凯, 戴苏洲, 殷勇高. 热泵中氨基甲酸铵分解反应特性及反应器结构优化[J]. 化工进展, 2023, 42(9): 4522-4530.
[8]	徐茂淯, 陶帅, 齐聪, 梁林. 圆盘式环路热管的启动特性及温度波动[J]. 化工进展, 2023, 42(9): 4531-4537.
[9]	赵曦, 马浩然, 李平, 黄爱玲. 错位碰撞型微混合器混合性能的模拟分析与优化设计[J]. 化工进展, 2023, 42(9): 4559-4572.
[10]	卜治丞, 焦波, 林海花, 孙洪源. 脉动热管计算流体力学模型与研究进展[J]. 化工进展, 2023, 42(8): 4167-4181.
[11]	汪健生, 张辉鹏, 刘雪玲, 傅煜郭, 朱剑啸. 多孔介质结构对储层内流动和换热特性的影响[J]. 化工进展, 2023, 42(8): 4212-4220.
[12]	叶振东, 刘涵, 吕静, 张亚宁, 刘洪芝. 基于钙镁二元盐的热化学储能反应器的性能优化[J]. 化工进展, 2023, 42(8): 4307-4314.
[13]	俞俊楠, 俞建峰, 程洋, 齐一搏, 化春键, 蒋毅. 基于深度学习的变宽度浓度梯度芯片性能预测[J]. 化工进展, 2023, 42(7): 3383-3393.
[14]	单雪影, 张濛, 张家傅, 李玲玉, 宋艳, 李锦春. 阻燃型环氧树脂的燃烧数值模拟[J]. 化工进展, 2023, 42(7): 3413-3419.
[15]	王硕, 张亚新, 朱博韬. 基于灰色预测模型的水煤浆输送管道冲蚀磨损寿命预测[J]. 化工进展, 2023, 42(7): 3431-3442.