油砂沥青分离技术研究进展

doi:10.16085/j.issn.1000-6613.2017-1913

摘要/Abstract

摘要： 油砂作为一种储量丰富的非常规石油资源，越来越受到世界各国的广泛关注。对于油砂的加工利用，其前提就是油砂沥青的分离，因此对其技术的研究十分必要。本文首先介绍了油砂的组成及分类，然后着重对几种主要油砂分离技术（热水洗法、有机溶剂萃取法、超临界流体萃取法、超声波辅助萃取法、离子液体萃取法和热解干馏法）的优缺点进行了汇总，并详细分析了它们各自的分离流程。其中，热水洗法、有机溶剂萃取法和热解干馏法是目前研究相对成熟的3种方法，而其他方法虽然分离效果相对高，但是对工艺条件和设备的要求较高，导致较高的投资和运行成本，因此还需要对这些油砂沥青分离工艺进行更加深入的研究，以满足工业化应用的要求。最后，对油砂沥青分离技术的发展前景进行了展望。

关键词: 油砂, 热水洗, 溶剂萃取, 超临界流体萃取, 超声辅助萃取, 离子液体萃取, 热解, 油砂沥青

Abstract: The oil sand as a kind of unconventional oil resource has attracted widespread concerns all over the world due to its abundant reserves. It is necessary to study the oil sand bitumen separation technology as result of that the separation of oil sand bitumen is the premise of processing and utilization of oil sand resources. The composition and classification of oil sand are introduced. The characteristics of several major separation technologies (i.e., hot-water extraction, solvent extraction, supercritical fluid extraction, ultrasonic-assisted extraction, ionic liquids extraction and pyrolysis) are then summarized, and their own separation process are analyzed in detail. The development prospect of separation technology of oil sand bitumen is simultaneously forecasted.

Key words: oil sand, hot-water extraction, solvent extraction, supercritical fluid extraction, ultrasound-assisted extraction, ionic liquids extraction, pyrolysis, oil sand bitumen

中图分类号:

TE39
TE667

郝俊辉, 田原宇, 张金弘, 乔英云, 车远军. 油砂沥青分离技术研究进展[J]. 化工进展, 2018, 37(09): 3337-3345.

HAO Junhui, TIAN Yuanyu, ZHANG Jinhong, QIAO Yingyun, CHE Yuanjun. Research progress on separation technologies of oil sand bitumen[J]. Chemical Industry and Engineering Progress, 2018, 37(09): 3337-3345.

参考文献

[1] 科兴华. 加拿大阿尔伯塔省的油砂资源和油砂工业[J]. 全球科技经济瞭望, 2004(5):58. KE X H. The oil sands and oil sands industry in Alberta of Canada[J]. Global Science, Technology and Economy Outlook, 2004(5):58.
[2] MA Y, LI S. Study of the characteristics and kinetics of oil sand pyrolysis[J]. Energy & Fuels, 2010, 24(3):1844-1847.
[3] 卢竟蔓, 张艳梅, 刘银东, 等. 加拿大油砂开发及利用技术现状[J].石化技术与应用, 2014, 32(5):452-456. LU J M, ZHANG Y M, LIU Y D, et al. Current situation of oil sands development and utilization in Canada[J]. Petrochemical Technology & Application, 2014, 32(5):452-456.
[4] 汪凯明. 我国非常规油气资源勘探开发前景[J]. 当代石油石化, 2009, 17(4):24-27. WANG K M. Exploration and development prospects of unconventional hydrocarbon resources in China[J]. Petroleum & Petrochemical Today, 2009, 17(4):24-27.
[5] 孙楠, 张秋民, 关珺, 等.扎赉特旗油砂在氮气气氛下的热解制油研究[J]. 燃料化学学报, 2007, 35(2):241-244. SUN N, ZHANG Q M, GUAN J, et al. Pyrolysis of Zhalaiteqi oil sands under nitrogen atmosphere[J]. Journal of Fuel Chemistry and Technology, 2007, 35(2):241-244.
[6] 张安贵, 王刚, 毕研涛, 等. 内蒙古图牧吉油砂流化热转化反应规律[J].石油学报(石油加工), 2011, 27(2):249-255. ZHANG A G, WANG G, BI Y T, et al. Fluid thermal conversion of Tumuji oil sand from Inner Mongolia[J]. Acta Petrolei Sinica (Petroleum Processing Section), 2011, 27(2):249-255.
[7] HAN D Y, CAO Z B, XU X Q. Study on solvent extraction of Mongolia Outcrop oil sands[J]. Energy Sources Part A:Recovery Utilization & Environmental Effects, 2013, 35(14):1368-1374.
[8] 任嗣利. 水基提取技术用于油砂分离的研究进展[J].化工学报, 2011, 62(9):2406-2412. REN S L. Research progress in water-based bitumen extraction from oil sands[J]. CIESC Journal, 2011, 62(9):2406-2412.
[9] 何林, 孙文郡, 李鑫钢.溶剂萃取在油砂分离中的应用及发展[J]. 化工进展, 2011, 30(s2):186-189. HE L, SUN W J, LI X G. Application and development of solvent extraction used in the separation of oil sands bitumen[J]. Chemical Industry and Engineering Progress, 2011, 30(s2):186-189.
[10] NIKAKHTARI H, VAGI L, CHOI P, et al. Solvent screening for non-aqueous extraction of Alberta oil sands[J]. Canadian Journal of Chemical Engineering, 2013, 91(6):1153-1160.
[11] PAL K, BRANCO L D P N, HEINTZ A, et al. Performance of solvent mixtures for non-aqueous extraction of Alberta oil sands[J]. Energy & Fuels, 2015, 29(4):2261-2267.
[12] ABRAMOV O V, ABRAMOV V O, MYASNIKOV S K, et al. Extraction of bitumen, crude oil and its products from tar sand and contaminated sandy soil under effect of ultrasound[J]. Ultrasonics Sonochemistry, 2009, 16(3):408-416.
[13] SUBRAMANIAN M, HANSON F V. Supercritical fluid extraction of bitumens from Utah oil sands[J]. Fuel Processing Technology, 1998, 55(1):35-53.
[14] 张坚强, 李鑫钢, 隋红. 离子液体促进溶剂萃取油砂沥青[J].化工进展, 2014, 33(8):1986-1991. ZHANG J Q, LI X G, SUI H. Solvent extraction of bitumen from oil sands amended with ionic liquid[J]. Chemical Industry and Engineering Progress, 2014, 33(8):1986-1991.
[15] PAINTER P, WILLIAMS P, MANNEBACH E. Recovery of bitumen from oil or tar sands using ionic liquids[J]. Energy & Fuels, 2009, 24(2):1094-1098.
[16] 唐军, 卢春喜, 张永民, 等. 一种脱油油砂颗粒流态化特性的研究[J].高校化学工程学报, 2010, 24(3):435-440. TANG J, LU C X, ZHANG Y M, et al. Study on the fluidization characteristics of burned oil sand particles[J]. Journal of Chemical Engineering of Chinese Universities, 2010, 24(3):435-440.
[17] ZHANG A, GAO J, WANG G, et al. Reaction performance and chemical structure changes of oil sand bitumen during the fluid thermal process[J]. Energy & Fuels, 2011, 25(8):3615-3623.
[18] SCHRAMM L L, MORRISON C, STASIUK E N. Some effects of chemical additions to nascent primary froth from the hot water flotation of bitumen from Athabasca oil sand[J]. Fuel Processing Technology, 1998, 56(3):243-261.
[19] CLARK K A, PASTERNACK D S. Hot water separation of bitumen from Alberta bituminous sand[J]. Industrial & Engineering Chemistry, 1932, 24:1410-1416.
[20] SANFORD E C, SEYER F A. Processibility of Athabasca tar sand using a batch exctraction unit:the role of NaOH[J]. CIM Bulletin, 1979, 72(803):164-169.
[21] DAI Q, CHUNG K H. Hot water extraction process mechanism using model oil sands[J]. Fuel, 1996, 75(2):220-226.
[22] SANFORD E C. Processabilty of Athabasca oil sand:Interrelationship between oil sand fine solids, process aids, mechanical energy and oil sand age after mining[J]. Canadian Journal of Chemical Engineering, 1983, 61(4):554-567.
[23] SCHRAMM L L, SMITH R G. Some parametric studies of oil sand conditioning in the hot water flotation process[J]. AOSTRA Journal of Research, 1989, 5:87-107.
[24] CHONG J, NG S, CHUNG K H, et al. Impact of fines content on a warm slurry extraction process using model oilsands[J]. Fuel, 2003, 82(4):425-438.
[25] HE L, LIN F, LI X, et al. Interfacial sciences in unconventional petroleum production:from fundamentals to applications[J]. Chemical Society Reviews, 2015, 44(15):5446-5494.
[26] 孟猛.图牧吉油砂中有机质的提取[D]. 大连:大连理工大学, 2008. MENG M. Extraction of organic substance from Tumuji oil sand[D]. Dalian:Dalian University of Technology, 2008.
[27] 罗茂, 耿安松, 廖泽文. 油砂沥青热碱水萃取分离技术现状[J]. 矿物岩石地球化学通报, 2011, 30(1):113-118. LUO M, GENG A S, LIAO Z W. Technology status of extracting bitumen from oil sand using hot alkaline water[J]. Bulletin of Mineralogy, Petrology and Geochemistry, 2011, 30(1):113-118.
[28] 罗茂, 耿安松, 廖泽文. 油砂中沥青的热碱水萃取分离及其影响因素[J]. 油气地质与采收率, 2011, 18(3):94-97. LUO M, GENG A S, LIAO Z W. Separation of hot water-based extraction for oil sand bitumen and its affecting parameter[J]. Petroleum Geology and Recovery Efficiency, 2011, 18(3):94-97.
[29] 严格.内蒙古油砂热碱水洗分离实验研究[J]. 油田化学, 2005, 22(4):375-377. YAN G. An experimental study on extracting bitumen from Inner Mongolia oil sand with hot alkaline water[J]. Oilfield Chemistry, 2005, 22(4):375-377.
[30] 许耀辉, 马国东, 李云, 等.哈萨克斯坦油砂溶剂抽提的实验研究[J]. 辽宁石油化工大学学报, 2012, 32(3):6-8. XU Y H, MA G D, LI Y, et al. The solvent extraction investigation on Kazakhstan oil sand[J]. Journal of Liaoning University of Petroleum & Chemical Technology, 2012, 32(3):6-8.
[31] CORMACK D E, KENCHINGTON J M, PHILIPS C R. Parameters and mechanisms in the solvent extraction of mined Athabasca oil sand[J]. The Canadian Journal of Chemical Engineering, 1977, 55(5):527-580.
[32] WANG S Q, LIU J, ZHANG L. Interaction forces between asphaltene surfaces in organic solvents[J]. Langmuir, 2010, 26(1):283-290.
[33] ZUBAIDY E A H, ABOUELNASR D A. Fuel recovery from waste oily sludge using solvent extraction[J]. Process Safety and Environmental Protection, 2010, 88(5):318-326.
[34] 许修强, 王红岩, 郑德温, 等.溶剂抽提法处理油砂的研究[J]. 石油炼制与化工, 2009, 40(4):57-60. XU X Q, WANG H Y, ZHENG D W, et al. Study on the solvent extraction of oil sands[J]. Petroleum Processing and Petrochemicals, 2009, 40(4):57-60.
[35] 陈德军, 赵锁奇, 许志明, 等.加拿大油砂溶剂抽提分离工艺的研究[J]. 现代化工, 2009, 29(1):23-25. CHEN D J, ZHAO S Q, XU Z M, et al. Study on solvent extraction process of Canada oil sands[J]. Modern Chemical Industry, 2009, 29(1):23-25.
[36] 唐晓东, 李斌, 李晶晶, 等.克拉玛依油砂溶剂萃取分离实验研究[J]. 应用化工, 2014, 43(5):874-876. TANG X D, LI B, LI J J, et al. Experimental study on solvent extraction and separation of Karamay oil sands[J]. Applied Chemical Industry, 2014, 43(5):874-876.
[37] WANG T, ZHANG C, ZHAO R Y, et al. Solvent extraction of bitumen from oil sands[J]. Energy & Fuels, 2014, 28(4):2297-2304.
[38] PAL K, BRANCO L D P N, HEINTZ A, et al. Performance of solvent mixtures for non-aqueous extraction of alberta oil sands[J]. Energy & Fuels, 2015, 29(4):2261-2267.
[39] 朱宏武. 油砂超声波除油试验研究[J]. 石油矿场机械, 2004, 33(5):43-46. ZHU H W. Experimental study on removing oil-stain from gravel[J]. Oil Field Equipment, 2004, 33(5):43-46.
[40] NACERA A, BERTHE R, ANN V W, et al. Crystallization of potash alum:effect of power ultrasound[J]. Ultrason Sonchem, 2001(8):265-279.
[41] ZHAO D Z, SUN W W, SUN M Z, et al. The separating of Inner Mongolian oil sand with ultrasound[J]. Petroleum Science and Technology, 2011, 29(24):2530-2535.
[42] 许修强, 王红岩, 郑德温, 等. 克拉玛依油砂超声波分离技术[J]. 石油化工高等学校学报, 2009, 22(2):45-48. XU X Q, WANG H Y, ZHENG D W, et al. Method for detaching Karamay oil sand by ultrasonic[J]. Journal of Petrochemical Unversities, 2009, 22(2):45-48.
[43] 王进平, 辛凤艳, 王利民. 固体溶质在含夹带剂超临界二氧化碳中溶解度的计算[J], 河北科技大学学报, 2007, 28(3):212-214. WANG J P, XIN F Y, WANG L M. Calculation of solid solute solubility in supercritical carbon dioxide with cosolvent[J]. Journal of Hebei University of Science and Technology, 2007, 28(3):212-214.
[44] 陈惜明.超临界流体萃取技术在焦油加工中的研究[J].燃料与化工, 2004, 35(4):46-48. CHEN X M. Study on supercritical fluid extraction technology in tar processing[J]. Fuel & Chemical Processes, 2004, 35(4):46-48.
[45] ROSE J L, MONNERY W D, CHONG K, et al. Experimental data for the extraction of Peace River bitumen using supercritical ethane[J]. Fuel, 2001, 80(8):1101-1110.
[46] LA H, GUIGARD S E. Extraction of hydrocarbons from Athabasca oil sand slurry using supercritical carbon dioxide[J]. Journal of Supercritical Fluids, 2015, 100:146-154.
[47] LI X, SUN W, WU G, et al. Ionic liquid enhanced solvent extraction for bitumen recovery from oil sands[J].Energy & Fuels, 2011, 25(11):5224-5231.
[48] PAINTER P, WILLIAMS P, LUPINSKY A. Recovery of bitumen from Utah tar sands using ionic liquids[J]. Energy & Fuels, 2010, 24(9):5081-5088.
[49] KHULBE K C, MANNA R S, LAMARCHE A M, et al. Thermal decomposition of Athabasca tar sand and bitumen[J]. Fuel Processing Technology, 1993, 35(3):303-316.
[50] LIU P, ZHU M, ZHANG Z, et al. Pyrolysis of an Indonesian oil sand in a thermogravimetric analyser and a fixed-bed reactor[J]. Journal of Analytical and Applied Pyrolysis, 2016, 117:191-198.
[51] 梁文杰, 阙国和, 刘晨光, 等.石油化学[M]. 2版.东营:中国石油大学出版社, 2008:283-287. LIANG W J, QUE G H, LIU C G, et al. Petroleum chemistry[M]. 2nd ed. Dongying:China University of Petroleum Press, 2008:283-287.
[52] 徐春明, 杨朝合. 石油炼制工程[M]. 2版. 北京:石油工业出版社, 2009:271-273. XU C M, YANG C H. Petroleum refining engineering[M]. 2nd ed. Beijing:Petroleum Industry Press, 2009:271-273.
[53] ALVAREZ E, MARROQUIN G, TREJO F, et al. Pyrolysis kinetics of atmospheric residue and its SARA fractions[J]. Fuel, 2011, 90(12):3602-3607.
[54] MA Y, LI S Y. The pyrolysis, extraction and kinetics of Buton oil sand bitumen[J]. Fuel Processing Technology, 2012, 100:11-15.
[55] Al-OTOOM A, AL-HARAHSHEH M, ALLAWZI M, et al. Physical and thermal properties of Jordanian tar sand[J]. Fuel Processing Technology, 2013, 106:174-180.
[56] SHIN S, IM S I, KWON E H, et al. Kinetic study on the nonisothermal pyrolysis of oil sand bitumen and its maltene and asphaltene fractions[J]. Journal of Analytical and Applied Pyrolysis, 2017, 124:658-665.
[57] STEINMETZ I. Cracking of mix of tar sands froth product:US3466240[P]. 1969-09-09.
[58] NATHAN M F, SKAPERDAS G T, GRUBB G C. Fluid coking of tar sands:CA823183[P]. 1969-09.
[59] 马小龙, 张自生, 高鑫, 等.油砂热解特性及工艺与装置研究开发现状与评述[J].化工进展, 2016, 35(11):3484-3490. MA X L, ZHANG Z S, GAO X, et al. Status and commentary of research and development on oil sand pyrolysis characteristics with technology and equipment[J]. Chemical Industry and Engineering Progress, 2016, 35(11):3484-3490.
[60] 田原宇, 乔英云, 山红红, 等. 油页岩/油砂下行循环流化床热解液化工艺:CN102942949A[P]. 2013-02-27. TIAN Y Y, QIAO Y Y, SHAN H H, et al. The descending circulating fluidized bed pyrolysis-liquefaction process of oil shale/oil sand:CN102942949A[P]. 2013-02-27.
[61] 卢春喜, 徐春明, 李术元, 等. 油砂直接流化床焦化的方法和装置:CN101358136[P]. 2009-02-04. LU C X, XU C M, LI S Y, et al. Method and equipment of direct fluidized-bed coking for oil sand:CN101358136[P]. 2009-02-04.
[62] 卢竟蔓. 5kt/a油砂直接流化焦化中试装置的设计[J].炼油技术与工程, 2013, 43(7):17-20. LU J M. Design of a 5000 TPY oil sands fluid coking pilot plant[J]. Petroleum Refinery Engineering, 2013, 43(7):17-20.
[63] 刘晓娜, 卢春喜, 王祝安. 新疆油砂直接流化床焦化中试装置的工艺方案[J].石化技术与应用, 2013, 31(6):493-496. LIU X N, LU C X, WANG Z A. Process program of direct fluidized-bed coking pilot plant for Xinjiang's oil sand[J]. Petrochemical Technology & Application, 2013, 31(6):493-496.
[64] 郑德温, 葛稚新, 王红岩, 等.小颗粒油页岩固体热载体干馏工艺评价装置:CN201737895U[P]. 2011-02-09. ZHENG D W, GE Z X, WANG H Y, et al. Evaluation device for the retorting technology of small particle oil shale using solid heat carrier:CN201737895U[P]. 2011-02-09.