化工进展 ›› 2016, Vol. 35 ›› Issue (11): 3595-3595.DOI: 10.16085/j.issn.1000-6613.2016.11.032

• 材料科学与技术 • 上一篇    下一篇

木质素磺酸钙-石墨烯复合量子点的制备及性能

许利娜1, 黄坤1, 李守海1, 李梅1, 夏建陵1,2   

  1. 1. 中国林业科学研究院林产化学工业研究所, 生物质化学利用国家工程实验室, 国家林业局林产化学工程重点开放性实验室, 生物质能源与材料重点实验室, 江苏 南京 210042;
    2. 中国林业科学研究院林业新技术研究所, 北京 100091
  • 收稿日期:2016-04-18 修回日期:2016-06-16 出版日期:2016-11-05 发布日期:2016-11-05
  • 通讯作者: 夏建陵,研究员,研究方向为天然生物质资源的化学利用。E-mail:xiajianling@126.com。
  • 作者简介:许利娜(1987-),女,硕士,研究实习员。E-mail:xulina072@163.com。
  • 基金资助:

    国家自然科学基金(31170544)及江苏省生物医药协同创新项目。

Synthesis and properties of lignin/graphene quantum dots composites as fluorescent sensor

XU Lina1, HUANG Kun1, LI Shouhai1, LI Mei1, XIA Jianling1,2   

  1. 1. Institute of Chemical Industry of Forestry Products, CAF; National Engineering Lab. for Biomass Chemical Utilization; Key and Lab. on Forest Chemical Engineering, SFA; Key Lab. of Biomass Energy and Material, Nanjing 210042, China;
    2. Institute of Forest New Technology, Chinese Academy of Forestry, Beijing 100091, China
  • Received:2016-04-18 Revised:2016-06-16 Online:2016-11-05 Published:2016-11-05

摘要: 木质素磺酸盐是造纸工业主要副产物之一,本文利用木质素磺酸钙和柠檬酸为原料通过绿色简便的原位反应制备木质素磺酸钙/石墨烯复合量子点,利用荧光光谱、紫外可见光谱和透射电镜等研究了复合量子点的光学性能、结构模型和对金属离子的选择性吸附性能,结果表明该复合量子点的荧光强度是石墨烯量子点的4倍多,并且复合量子点可以选择性识别Fe3+,在10~500μmol/L范围内,Fe3+的浓度与复合量子点溶液的荧光强度有良好的线性关系,可应用于Fe3+的检测。此荧光探针制备简便,成本低廉,检测铁离子速度快,准确性高,选择性好,在离子检测方面有潜在的应用价值。

关键词: 木质素磺酸钙, 石墨烯量子点, 荧光探针, 三价铁

Abstract: Ligninsulfonates are byproducts of the sulfite-pulping procedure. In this paper, we prepared CSL/GQDs composites by uni-form modification the GQDs with lignosulfonate calcium (CSL) via in-situ reaction in a green and facile preparative route. This article uses fluorescence spectroscopy、UV-vis spectra and TEM to investigate the optical properties, the molecular structure and the ion detection of composites. The composites exhibit strong fluorescence emission and nice selectivity which is dramatically enhanced as high as four times that of the free GQDs. The prepared sensor allows high sensitivity and specificity toward Fe3+ analysis and presents a good linearity in range of 10—500μmol/L. Furthermore, this fluorescent probe preparation is simple, low cost, and highly sensitive and specific toward Fe3+ analysis.

Key words: lignosulfonate calcium, graphene quantum dots, fluorescent sensor, Fe3+

中图分类号: 

京ICP备12046843号-2;京公网安备 11010102001994号
版权所有 © 《化工进展》编辑部
地址:北京市东城区青年湖南街13号 邮编:100011
电子信箱:hgjz@cip.com.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn