剖分式机械密封技术研究现状及关键问题探讨

doi:10.16085/j.issn.1000-6613.2015.05.004

化工进展 ›› 2015, Vol. 34 ›› Issue (05): 1207-1214.DOI: 10.16085/j.issn.1000-6613.2015.05.004

剖分式机械密封技术研究现状及关键问题探讨

胡琼¹, 孙见君¹, 涂桥安¹, 马晨波¹, 何斌辉¹, 刘平²

1. 南京林业大学机械电子工程学院, 江苏南京 210037;
2. 南京鼎鑫轻工制品有限公司, 江苏南京 210036

收稿日期:2014-09-29 修回日期:2014-10-16 出版日期:2015-05-05 发布日期:2015-05-05
通讯作者: 孙见君,教授,博士生导师.E-mailsunjianjun@njfu.edu.cn.
作者简介:胡琼(1989—),女,博士研究生.
基金资助:
国家自然科学基金(51375245)、南京市科技型中小企业技术创新基金项目(2012创基026)及南京林业大学优秀博士学位论文创新基金项目及江苏省第十批六大人才高峰资助项目(ZBZZ-037).

Development of split mechanical seal technology and discussions of key issues

HU Qiong¹, SUN Jianjun¹, TU Qiaoan¹, MA Chenbo¹, HE Binhui¹, LIU Ping²

1. School of Mechanical and Electronic Engineering, Nanjing Forestry University, Nanjing 210037, Jiangsu, China;
2. Nanjing Dingxin Light Industrial Products Co., Ltd., Nanjing 210036, Jiangsu, China

Received:2014-09-29 Revised:2014-10-16 Online:2015-05-05 Published:2015-05-05

摘要/Abstract

摘要： 对近几十年国内外剖分式机械密封的结构设计及理论研究状况进行了综述性研究,分析归纳得出:剖分面密封形式包括自然断口连接密封、填充密封垫密封以及光滑面接触密封;定位方式分为断口搭接定位、外力辅助定位、定位件辅助定位、密封环座定位以及安装工具辅助定位;剖分式弹性辅助密封圈则通过搭接式、插接式、扣式以及标准件组合式连接形成整环.深入分析表明:剖分式机械密封技术领域还存在结构设计不够优、理论研究不够深、测量方法不够准、性能指标未定制和制造技术需提高等问题,通过开展剖分式机械密封端面温度、变形及泄漏模型研究,建立设计方法,制定性能指标,开发有效的测试技术和高效可行的制造工艺,是解决上述问题的关键,也是未来一段时间的主要任务.

关键词: 剖分式机械密封, 结构设计, 剖分面, 变形, 测量方法

Abstract: This paper summarized the split mechanical seal structure design and theoretical research status. Sealing ways of parting interface include sealing by connecting natural fractures,sealing with elastic gasket filled in pit and sealing through smoothing parting surfaces;location modes of parting surfaces are divided into five types,locating respectively by connecting fractures,external force compressing,locating elements,seats of seal rings and installation tools;fracture connections of split elastic auxiliary seal ring contain overlapping connection,inserting connection,buckling connection and the connection with standard elastic seal rings. This article further indicated that there are still some problems in the split mechanical seal field,such as suboptimal structure design,little theoretical research,imprecise measurements,no performance criteria and improper manufacturing technology. This article suggested possible solutions to the problems mentioned above. Establishing design method,enacting performance criteria and exploit effective measurement methods and feasibly efficient manufacturing process should be considered based on the development of theoretical temperature,deformation and leakage models of split mechanical seal.

Key words: split mechanical seal, structure design, parting surface, deformation, measurement method

中图分类号:

TB42

胡琼, 孙见君, 涂桥安, 马晨波, 何斌辉, 刘平. 剖分式机械密封技术研究现状及关键问题探讨[J]. 化工进展, 2015, 34(05): 1207-1214.

HU Qiong, SUN Jianjun, TU Qiaoan, MA Chenbo, HE Binhui, LIU Ping. Development of split mechanical seal technology and discussions of key issues[J]. Chemical Industry and Engineering Progree, 2015, 34(05): 1207-1214.

参考文献

[1] Macro H. Why split seals make sense for your large pumps?[N]. Power Engineering International,2010-04(18).

[2] Evans T. Meet today's split seals:Advances in technology further reduced maintenance costs and ensure reliability[N]. John Crane Today,2013.

[3] Dick M. Longview fiber improves pulper operation with installation of split mechanical seals[N]. Pulp & Paper,1998-01(72).

[4] 马卫东. 分体式机械密封:中国,2378578[P]. 2000-05-17.

[5] 李旭. 组合式密封环结构:中国,2430579[P]. 2001-05-16.

[6] 西尔弗斯特T,林德纳,霍尔德C,等. 多体式密封环:中国,101424343[P]. 2009-05-06.

[7] Copes J C. Split mechanical seals:US,3025070[P]. 1962-03-13.

[8] Bessette R F,Simmons L K,Proulx G S,et al. Fully split cartridge mechanical seal assembly:US,5662340[P]. 1997-09-02.

[9] Nagai Y,Matsushita M,Yamauchi Y. Mechanical seal including a split seal ring:US,5067733[P]. 1991-11-26.

[10] Radosav J J,Evan T A,Dudek D M,et al. Split mechanical face seal:US,5199720[P]. 1993-04-06.

[11] Sangren J E,Poter J S. Rotating seal ring component kit for a mechanical split seal:US,5913521[P]. 1999-06-22.

[12] Sato T,Okubo H. Split mechanical seal:US,2010/0264597A1[P]. 2010-10-21.

[13] Bezak R. Design and application of split mechanical end face seals[J]. Lubrication Engineering,1978,34(6):304-308,319.

[14] 武鹏,付国涛,叶素丹,等. 剖分式机械密封及装有剖分式机械密封的双螺杆泵:中国,103388580A[P]. 2013-11-13.

[15] Azibert H V. Split mechanical face seal:US,4576384[P]. 1986-03-18.

[16] Azibert H V. Universal split mechanical seal:US,5571268[P]. 1996-11-05.

[17] James B,Harris K L. Split mechanical face seal:US,6485023B2[P]. 2002-11-26.

[18] Gisrd B. Mechanical seal assembly:US,2007/0267818A1[P]. 2007-11-22.

[19] Azibert H V,Ruan B,Wu S F,et al. Split mechanical face seal with seal face fluid introducing structure:US,6059293[P]. 2000-05-09.

[20] Azibert H V,Ruan B,Wu S F,et al. Split mechanical face seal with negative pressure control system:US,6068264[P]. 2000-05-30.

[21] Escue J W. Rotatable shaft sealing assembly with flowable material spacer means:US,4575098[P]. 1986-03-11.

[22] 任兴芳,孙安新,张昌盛,等. 剖分式机械密封装置:中国,201772066U[P]. 2011-03-23.

[23] Bjornson C C. Mechanical split seal:US,2004/0188944A1[P]. 2004-09-30.

[24] 张园,杨启明. 一种新型釜用剖分式机械密封装置设计[J]. 化工机械,2009,36(2):96-99.

[25] Reagan M P. Split face mechanical sealing ring and their use:US,5615893[P]. 1997-04-01.

[26] Wilkinson S C W. Sealing means for split members of rotary mechanical face seals:US,3188096[P]. 1965-06-08.

[27] 杨启明,周岩,马兴昌,等. 剖分式机械密封:中国,2742241[P]. 2005-11-23.

[28] 李树生,童川. 一种带芯O形圈整体剖分式机械密封装置:中国,201844026U[P]. 2011-05-25.

[29] 杨启明,张圆,杨旭文,等. 具有扣形结构的剖分式机械密封圈: 中国,201162822[P]. 2008-12-10.

[30] 王洪群,虞培清. 釜用完全剖分式机械密封:中国,101725712A[P]. 2010-06-09.

[31] 孙见君,胡琼,佘宝秋,等. 具有自紧密封能力的剖分式机械密封:中国,103307284A[P]. 2013-09-18.

[32] 王洪群,黄志坚,周国忠,等. 矩形截面弹性密封圈在剖分式机械密封上的应用[J]. 化工设备与管道,2013,50(5):55-57.

[33] Azibert H V,Wu S F. First operating experiences with the integration of split sealing constraints to a gas seal challenge[C]//Proceedings of the Twentieth International Pump Users Symposium,2003.

[34] 陈碧凤. 反应釜用剖分式机械密封机理分析及设计[D]. 成都:西南石油大学,2007.

[35] Boyson S. Reliability performance of split seal technology when combined with a centrifugal flow device[N]. Sealing Technology,2007-07.

[36] 陈碧凤,杨启明. 剖分式螺旋机械密封结构设计[J]. 机械,2009,36(5):65-67.

[37] 陶凯,涂桥安,孙见君,等. 基于ANSYS的剖分式机械密封变形分析[J]. 润滑与密封,2014(3):84-90.

[38] Split seals provide cost and reliability benefits[N]. Sealing Technology,2005-01.

[39] 邵嘉兴,姚黎明,李鲲,等. 完全剖分式釜用机械密封结构分析[J]. 流体机械,2003,31(8). 36-38.

[40] John Crane. Split seal design saves installation time at wastewater pump station[N]. World Pumps,2003-09.

[41] 王洪群,虞培清. 釜用完全剖分式机械密封改进设计研究[J]. 化工机械,2010,37(3):299-301,311.

[42] Lebeck A O,Knowlton J S. A finite element for the three-dimensional deformation of a circular ring[J]. International Journal for Numerical Methods in Engineering,1985,21(421):421-435.

[43] 许静,彭旭东,白少先,等. 机械密封的扭转变形计算方法与影响因素[J]. 化工学报,2013,64(10):3686-3693.

[44] Doust T G,Parmar A. An experimental and theoretical study of pressure and thermal distortions in mechanical seal[J]. ASLE Transactions,1986,29(2):151 -159.

[45] 沈国良,陆锋,冯秀,等. 机械密封端面微变形研究进展[J]. 液压气动与密封,2012,32(2):5-8.

[46] Tournerie B,Reungoat D,Frene J. Temperature measurements by infrared thermography in the interface of a radial face seal[J]. Journal of Tribology,1991,113(3):571-576.

[47] Papadopoulos C I,Kaiktsis L,Fillon M. Computational fluid dynamics thermohydrodynamic analysis of three-dimensional sector-pad thrust bearings with rectangular dimples[J]. Journal of Tribology,2013,136(1):011702.

[48] Ayadi K,Brunetiere N,Tournerie B. Experimental syudy of the thermal behavior of mechanical face seals[C]//STLE Annual Meeting & Exhibition,2014.

[49] Gupta L A,Young L,Wondimu B,et al. Wireless temperature sensor for mechanical face seals using permanent magnets[J]. Sensors and Actuators A:Physical,2013,203:369-372.

[50] 李鲲,姚黎明,吴兆山,等. 机械密封环端面变形研究[J].润滑与密封,2001(5):44-47.

[51] Brunetière N,Tournerie B,Frêne J. TEHD lubrication of mechanical face seals in stable tracking mode[J]. Transactions of the ASME,2003,125:608-616.

[52] Wen Q F,Liu Y,Huang W F,et al. The effect of surface roughness on thermal-elasto-hydrodynamic model of contact mechanical seals[J]. Science China Physics,Mechanics & Astronomy,2013,56 (10):1920-1929.

[53] 周剑锋,顾伯勤. 螺旋槽机械密封的可控性[J]. 机械工程学报,2009,45(1):106-110.

剖分式机械密封技术研究现状及关键问题探讨

Development of split mechanical seal technology and discussions of key issues

PDF (PC)

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	戚志程, 马润梅, 李双喜, 刘丽静, 闫欣欣. 高压法兰内开孔金属O形环密封性能及变形失效分析[J]. 化工进展, 2023, 42(S1): 166-174.
[2]	陈蔚阳, 宋欣, 殷亚然, 张先明, 朱春英, 付涛涛, 马友光. 矩形微通道内液相黏度对气泡界面的作用机制[J]. 化工进展, 2023, 42(7): 3468-3477.
[3]	唐春霞, 李萌, 王玉玺, 宗永忠, 付少海. Cr(Ⅵ)去除用功能化纤维素纳米材料的结构设计研究进展[J]. 化工进展, 2023, 42(2): 585-594.
[4]	徐娜, 王国栋, 陶亚楠. 柔性可穿戴压阻式压力传感器研究进展[J]. 化工进展, 2023, 42(10): 5259-5271.
[5]	边宇, 张百超, 郑红. 多级孔COFs材料的设计、合成及应用[J]. 化工进展, 2022, 41(9): 4866-4883.
[6]	岳孟, 郑琼, 阎景旺, 张华民, 李先锋. 液流电池流场结构设计与优化研究进展[J]. 化工进展, 2021, 40(9): 4853-4868.
[7]	王军锋, 范志恒, 王东保, 陆帅全. 电场作用下液滴的变形及库仑分裂模式[J]. 化工进展, 2021, 40(10): 5451-5458.
[8]	王学科, 沈义伟, 赵洪滨, 曹岭, 陈山, 贾彩, 谢晓峰. 旋涡式氢气循环泵的设计及性能分析[J]. 化工进展, 2020, 39(S2): 89-96.
[9]	倪永涛, 赵钦新, 桂雍, 王云刚, 邵怀爽. 两级低压引射器的结构设计与数值分析[J]. 化工进展, 2020, 39(S1): 69-76.
[10]	许晓芝, 李彪, 施凯强, 董思源, 靳祖超, 韩景宾. LDHs基气体阻隔薄膜材料的研究进展[J]. 化工进展, 2020, 39(6): 2177-2186.
[11]	裴强,丁爱祥,杨明丽,徐果,徐文豪. 氢键型超分子聚合物[J]. 化工进展, 2020, 39(1): 233-249.
[12]	覃发梅, 邱学青, 孙川, 丁子先, 方志强. 纳米纤维素去除水体系重金属离子的研究进展[J]. 化工进展, 2019, 38(07): 3390-3401.
[13]	于宾, 赵晓明, 孙天. 基于纤维取向的纳米纤维滤料设计及其性能[J]. 化工进展, 2018, 37(10): 3966-3973.
[14]	尚阳, 王跃社. 单喷嘴低压引射器的结构设计与数值分析[J]. 化工进展, 2017, 36(S1): 107-114.
[15]	蒋明虎, 谭放, 金淑芹, 龙桂兰, 陈桂芹, 徐保蕊. 基于Fluent网格变形的旋流器的形状优化[J]. 化工进展, 2016, 35(08): 2355-2361.