Chemical Industry and Engineering Progress ›› 2019, Vol. 38 ›› Issue (03): 1487-1493.DOI: 10.16085/j.issn.1000-6613.2018-0690

Previous Articles     Next Articles

Hydrothermal synthesis of micro/nano metallic copper using green tea water as both solvent and reductant

Yu YE1,2(),Kailun ZHANG1,2,Di HUO1,2()   

  1. 1. Key Laboratory for Anisotropic and Texture of Materials (Ministry of Education), Northeastern University, Shenyang 110819,Liaoning, China
    2. Institute of Ceramics and Powder Metallurgy, School of Materials Science and Engineering,Northeastern University,Shenyang 110819, Liaoning, China
  • Received:2018-04-03 Revised:2018-11-11 Online:2019-03-05 Published:2019-03-05
  • Contact: Di HUO

绿茶水热还原制备微纳米金属铜

叶榆1,2(),张凯伦1,2,霍地1,2()   

  1. 1. 东北大学材料各向异性与织构教育部重点实验室,辽宁 沈阳110819
    2. 东北大学材料科学与工程学院,陶瓷与粉末冶金研究所,辽宁 沈阳110819
  • 通讯作者: 霍地
  • 作者简介:叶榆(1997—),男,本科生,研究方向为金属纳米粉体制备。E-mail:1198595608@qq.com。|霍地,博士,副教授,主要研究方向为纳米材料的合成与制备。E-mail:huod@atm.neu.edu.cn

Abstract:

Micro/nano metallic Cu powders with different morphologies were prepared by hydrothermal method using green tea water as both solvent and reductant. The effects of pH, green tea concentration, hydrothermal temperature and TiOSO4 additive on the phase purity and particle morphology of the micro/nano Cu were also investigated. The results show that pure Cu powders with nearly spherical shape could be obtained under the conditions of pH=3—12, the mass ratio of tea to water as 1∶100 and temperature of 200℃. When the ratio of tea to water or the reaction temperature was decreased, two phases of Cu and Cu2O would form, and the relative content of Cu2O in the product gradually increased. Additionally, using the pure Cu2O powders which were obtained by performing the first hydrothermal process as the starting material, one-dimensional metallic Cu rods with a length of 10—40μm and a diameter of 0.4—0.9μm were obtained after a second hydrothermal processing at 200℃ for 24h with additive of 0.1g TiOSO4.

Key words: micro scale, micro/nano metallic copper, green tea water, hydrothermal, crystal morphology, green synthesis, reduction

摘要:

以绿茶茶水兼为溶剂和还原剂,采用水热法直接还原制备出不同形貌的微纳米金属Cu粉,同时研究了pH、茶水浓度(茶粉与水的质量比)、水热温度以及TiOSO4对微纳米Cu的相纯度和颗粒形貌的影响。研究结果表明:在pH=3~12、m(茶)∶m(H2O)=1∶100,反应温度为200℃的条件下,均可得到聚集态的球状金属Cu;降低茶水的浓度或反应温度,产物中存在Cu和Cu2O两相,且随着茶水浓度或反应温度的降低,产物中Cu2O的相对含量均逐渐升高;另外,在一次水热合成获得的单相Cu2O中加入0.1gTiOSO4并经过200℃、24h二次水热处理后,制备出长度为10~40μm、直径为0.4~0.9μm的一维棒状金属Cu。

关键词: 微尺度, 微纳米金属Cu, 绿茶茶水, 水热, 晶体形貌, 绿色合成, 还原

CLC Number: 

京ICP备12046843号-2;京公网安备 11010102001994号
Copyright © Chemical Industry and Engineering Progress, All Rights Reserved.
E-mail: hgjz@cip.com.cn
Powered by Beijing Magtech Co. Ltd