1 |
WU Suchen, DING Yiwen, ZHANG Chengbin, et al. Improving the performance of a thermoelectric power system using a flat-plate heat pipe[J]. Chinese Journal of Chemical Engineering, 2019, 27(1): 44-53.
|
2 |
胡卓焕, 袁成伟, 许佳寅, 等. 金属3D打印复合毛细芯孔径配比对环路热管特性影响[J]. 化工进展, 2022, 41(4): 1715-1724.
|
|
HU Zhuohuan, YUAN Chengwei, XU Jiayin, et al. Effect of metal 3D-printed composite capillary wick on loop heat pipe characteristics[J]. Chemical Industry and Engineering Progress, 2022, 41(4): 1715-1724.
|
3 |
郭浩, 纪献兵, 周儒鸿, 等. 超亲水毛细芯环路热管启动及热性能分析[J]. 化工进展, 2020, 39(4): 1227-1234.
|
|
GUO Hao, JI Xianbing, ZHOU Ruhong, et al. Analysis of start-up and thermal performance of super-hydrophilic porous wick loop heat pipe[J]. Chemical Industry and Engineering Progress, 2020, 39(4): 1227-1234.
|
4 |
熊康宁, 吴伟, 汪双凤. 平板形蒸发器环路热管的研究进展[J]. 化工进展, 2021, 40(10): 5388-5402.
|
|
XIONG Kangning, WU Wei, WANG Shuangfeng. Research and development of loop heat pipe with flat evaporator[J]. Chemical Industry and Engineering Progress, 2021, 40(10): 5388-5402.
|
5 |
曲燕. 环路热管技术的研究热点和发展趋势[J]. 低温与超导, 2009, 37(2): 7-14.
|
|
QU Yan. Hot study and development trend of loop heat pipes[J]. Cryogenics & Superconductivity, 2009, 37(2): 7-14.
|
6 |
郑铭铸, 诸凯, 杨洋, 等. 强化相变驱动的环路热管蒸发器可视化实验台建立及实验[J]. 化工进展, 2016, 35(7): 1969-1974.
|
|
ZHENG Mingzhu, ZHU Kai, YANG Yang, et al. Design of loop heat pipes experimental rig for phase change driving force and visual experiment[J]. Chemical Industry and Engineering Progress, 2016, 35(7): 1969-1974.
|
7 |
张红星, 林贵平, 丁汀, 等. 环路热管启动特性的实验研究[J]. 中国科学E辑: 工程科学 材料科学, 2005, 35(1): 17-30.
|
|
ZHANG Hongxing, LIN Guiping, DING Ting, et al. Experimental study on start-up characteristics of loop heat pipe[J]. Science in China SerE: Engineering & Material Science, 2005, 35(1): 17-30.
|
8 |
黄洁, 王乃华, 程林. 环路热管启动特性模拟[J]. 化工学报, 2014, 65(S1): 297-302.
|
|
HUANG Jie, WANG Naihua, CHENG Lin. Simulation of loop heat pipe start-up characteristic[J]. CIESC Journal, 2014, 65(S1): 297-302.
|
9 |
向佳佳, 陈曦, 谢荣建. 乙烷环路热管传热性能的实验研究[J]. 低温工程, 2018(5): 45-49.
|
|
XIANG Jiajia, CHEN Xi, XIE Rongjian. Experimental study on heat transfer performance of an ethane loop heat pipe[J]. Cryogenics, 2018(5): 45-49.
|
10 |
张先锋. 平板式环路热管性能的实验[J]. 化工进展, 2012, 31(6): 1200-1205.
|
|
ZHANG Xianfeng. Experimental investigation on the performance of loop heat pipe with flat evaporator[J]. Chemical Industry and Engineering Progress, 2012, 31(6): 1200-1205.
|
11 |
HUANG B J, HUANG H H, LIANG T L. System dynamics model and startup behavior of loop heat pipe[J]. Applied Thermal Engineering, 2009, 29(14/15): 2999-3005.
|
12 |
MAYDANIK Yury F, VERSHININ Sergey V. Development and tests of ammonia miniature loop heat pipes with cylindrical evaporators[J]. Applied Thermal Engineering, 2009, 29(11/12): 2297-2301.
|
13 |
KU Jentung, OTTENSTEIN Laura, KOBEL Mark, et al. Temperature oscillations in loop heat pipe operation[J]. AIP Conference Proceedings, 2001, 552(1): 255-262.
|
14 |
张红星, 林贵平, 丁汀, 等. 环路热管温度波动现象的实验分析[J]. 北京航空航天大学学报, 2005, 31(2): 116-120.
|
|
ZHANG Hongxing, LIN Guiping, DING Ting, et al. Experimental investigation on temperature oscillation of loop heat pipes[J]. Journal of Beijing University of Aeronautics and Astronautics, 2005, 31(2): 116-120.
|
15 |
胡卓焕, 周宇仁, 许佳寅. 理想范围内充液率对环路热管温度振荡的影响[J]. 化工进展, 2018, 37(12): 4551-4557.
|
|
HU Zhuohuan, ZHOU Yuren, XU Jiayin. Effect of charging ratio within ideal range on temperature oscillation for a loop heat pipe[J]. Chemical Industry and Engineering Progress, 2018, 37(12): 4551-4557.
|
16 |
WANG Yiwei, CEN Jiwen, JIANG Fangming, et al. LHP heat transfer performance: A comparison study about sintered copper powder wick and copper mesh wick[J]. Applied Thermal Engineering, 2016, 92: 104-110.
|
17 |
李雪强, 徐冰清, 张国栋, 等. 突出气相压头环路热管的启动及温度波动研究[J]. 工程热物理学报, 2020, 41(6): 1504-1509.
|
|
LI Xueqiang, XU Bingqing, ZHANG Guodong, et al. Experimental study on start-up forms and temperature oscillation of loop heat pipe enhanced by pressure head of evaporation[J]. Journal of Engineering Thermophysics, 2020, 41(6): 1504-1509.
|
18 |
ANDERSON Ann M. Experimental methods for engineers[J]. Experimental Thermal and Fluid Science, 1994, 9(2): 250.
|