Chemical Industry and Engineering Progree ›› 2016, Vol. 35 ›› Issue (S2): 324-327.DOI: 10.16085/j.issn.1000-6613.2016.s2.057

• Biochemical and pharmaceutical engineering • Previous Articles     Next Articles

Treatment and recycling of riboflavin crystallization mother liquor

GUO Yi1, HU Jianhua2, YANG Zijian3, LIANG Hao1   

  1. 1. College of Biological Science and Technology, Beijing University of Chemical Technology, Beijing 100029, China;
    2. Shanghai Acebright Pharmaceuticals Group Co., Ltd., Shanghai 201203, China;
    3. Chifeng Pharmaceuticals Co., Ltd., Chifeng 024000, Inner Mongolia, China
  • Received:2016-09-26 Online:2016-12-22 Published:2016-12-31

核黄素结晶母液的处理及回收利用

郭义1, 胡建华2, 杨梓剑3, 梁浩1   

  1. 1. 北京化工大学 生命科学与技术学院, 北京 100029;
    2. 上海创诺医药集团有限公司, 上海 201203;
    3. 赤峰制药股份有限公司, 内蒙古 赤峰 024000
  • 通讯作者: 梁浩,教授。E-mail:lianghao@mail.buct.edu.cn。
  • 作者简介:郭义(1992-),男,硕士研究生。

Abstract: The production of riboflavin by fermentation would produce a lot of crystallization mother liquor and it is hard to treat.The crystallization mother liquor was firstly treated by flocculation sedimentation with polyacrylamide in this study.The optimal adding quantity of polyacrylamide and pH were 200mg/L and 5~6,respectively.It can remove over 60% chemical oxygen demand(COD) of crystallization mother liquor.Flocculation was recovered by method of spray drying.The optimal operating parameters as follows:inlet air temperature was 190℃,flow rate of sample was 3mL/min,adding quantity of β-cyclodextrin was 1%.Under the conditions,the product yield and moisture content were 66.95% and 2.9%,decreasing the impact on the environment effectively.

Key words: crystallization mother liquor, polyacrylamide, flocculation, spray drying

摘要: 发酵法生产核黄素会产生大量的结晶母液,很难处理。本文首先采用聚丙烯酰胺对结晶母液进行絮凝沉降处理,确定了最佳投料量200mg/L,最优pH 5~6,母液中的化学需氧量(COD)去除率达60%以上。絮凝沉降物采用喷雾干燥法进行回收,对几个主要参数进行了优化,得到了最佳操作参数:进风温度190℃,进样流速3mL/min,β-环糊精添加量1%,产品得率66.95%,含水率2.9%,有效减小了对环境的影响。

关键词: 结晶母液, 聚丙烯酰胺, 絮凝, 喷雾干燥

CLC Number: 

京ICP备12046843号-2;京公网安备 11010102001994号
Copyright © Chemical Industry and Engineering Progress, All Rights Reserved.
E-mail: hgjz@cip.com.cn
Powered by Beijing Magtech Co. Ltd