[1] Eiamsa-ard S, Thianpong C, Eiamsa-Ard P. Turbulent heat transfer enhancement by counter/co-swirling flow in a tube fitted with twin twisted tapes[J]. Experimental Thermal and Fluid Science, 2010, 34(1):53-62. [2] Eiamsa-ard S, Thianpong C, Promvonge P. Experimental investigation of heat transfer and flow friction in a circular tube fitted with regularly spaced twisted tape elements[J]. International Communications in Heat and Mass Transfer, 2006, 33(10):1225-1233. [3] Armstrong R D, Bergles A E. A study of enhanced ceramic tubes for high temperature waste heat recovery[C]. Heat Transfer, 1990:21-26. [4] Bergles A E. Literature Review of Heat Transfer Enhancement Technology for Heat Exchangers in Gas-fired Applications:Topical Technical Report [M]. Gas Research Institute, 1991. [5] 俞秀民, 俞天兰, 彭德其, 等. 高效传热强化斜齿扭带及其低流速自动清洗技术[J]. 化工学报, 2005, 56(4):744-747. [6] 张琳, 钱红卫, 宣益民, 等. 自转螺旋扭带管内三维流动与传热数值模拟[J]. 化工学报, 2005, 56(9):1633-1638. [7] Rahimi M, Shabanian S R, Alsairafi A A. Experimental and CFD studies on heat transfer and friction factor characteristics of a tube equipped with modified twisted tape inserts[J]. Chemical Engineering and Processing:Process Intensification, 2009, 48(3):762-770. [8] Dhamane N B, Nalawade D B, Dange M M. Performance analysis of wavy twisted tape insert for heat transfer in a circular tube[J]. Transfer, 2014, 1(6):367-371. [9] Eiamsa-ard S, Wongcharee K, Eiamsa-ard P, et al. Heat transfer enhancement in a tube using delta-winglet twisted tape inserts[J]. Applied Thermal Engineering, 2010, 30(4):310-318. [10] Murugesan P, Mayilsamy K, Suresh S, et al. Heat transfer and pressure drop characteristics in a circular tube fitted with and without V-cut twisted tape insert[J]. International Communications in Heat and Mass Transfer, 2011, 38(3):329-334. [11] Eiamsa-ard S, Seemawute P, Wongcharee K. Influences of peripherally-cut twisted tape insert on heat transfer and thermal performance characteristics in laminar and turbulent tube flows[J]. Experimental Thermal and Fluid Science, 2010, 34(6):711-719. [12] Eiamsa-ard S, Yongsiri K, Nanan K, et al. Heat transfer augmentation by helically twisted tapes as swirl and turbulence promoters[J]. Chemical Engineering and Processing:Process Intensification, 2012, 60:42-48. [13] Thianpong C, Eiamsa-ard P, Promvonge P, et al. Effect of perforated twisted-tapes with parallel wings on heat tansfer enhancement in a heat exchanger tube[J]. Energy Procedia, 2012, 14:1117-1123. [14] 詹三江. 换热管内置开三角形边槽扭带的试验及流场数值模拟研究[D]. 南宁:广西大学, 2012. [15] 郭方文. 卧式换热管内聚丙烯塑料扭带工作特性及强化传热研究[D]. 南宁:广西大学, 2007. [16] 崔永章, 田茂诚. 内置折边扭带管内高湿气体对流凝结换热与流动特性[J]. 化工学报, 2010, 61(12):3092-3099. [17] 周水洪, 邓先和, 何兆红, 等. 旋流片强化传热的数值模拟和场协同分析[J]. 化工学报, 2007, 58(10):2437-2443. [18] 林清宇, 林靖宇, 林榕端, 等. 管内自旋扭带转速的研究[J]. 中国机械工程, 2007, 18(16):1970-1973. [19] 过增元. 换热器中的场协同原则及其应用[J]. 机械工程学报, 2003, 39(12):1-9. [20] Webb R L, Eckert E R G. Application of rough surfaces to heat exchanger design[J]. International Journal of Heat and Mass Transfer, 1972, 9:1647-1658. |