Chemical Industry and Engineering Progree

Previous Articles     Next Articles

Experimental study on manganese and zinc leaching from ferromanganese smelting dust

YANG Fengshi,SU Yi,LI Guobin,HU Liang   

  1. Faculty of Chemical Engineering,Kunming University of Science and Technology,Kunming 650500,Yunnan,China
  • Online:2014-05-05 Published:2014-05-05

锰铁冶炼烟尘灰中锰锌的浸出实验研究

杨逢时,苏毅,李国斌,胡亮   

  1. 昆明理工大学化工学院,云南 昆明 650500

Abstract: With FeSO4?7H2O as a reducing agent,manganese and zinc in ferromanganese smelting dust ash were leached in the form of Mn2+,Zn2+ by sulfuric acid. The optimal leaching condition was as follows:the concentration of H2SO4 was 20%,reaction time was 4 hours,reaction temperature was 90℃,liquid-solid ratio was 5∶1,dosage of FeSO4?7H2O was 75g,and stirring rate was 300 r/min. The highest leaching rate of manganese reached 96.76% and that of zinc was 84.88%.

Key words: ferromanganese smelting dust, sulfuric acid, manganese, zinc, leaching, reaction, solution, ferromanganese smelting dust, sulfuric acid, manganese, zinc, leaching

摘要: 以锰铁冶炼烟尘灰为原料,FeSO4?7H2O为还原剂,经硫酸浸出,使锰及锌元素以Mn2+、Zn2+形式进入溶液中,分离提取锰、锌元素。研究表明,浸出的最佳工艺条件为:H2SO4质量分数为20%,反应时间为4h,反应温度为90℃,液固比为5∶1,还原剂FeSO4?7H2O加入量为75g,搅拌速率为300r/min。锰浸出率可达96.76%,锌浸出率为84.88%。

关键词: 锰铁冶炼烟尘灰, 硫酸, 锰, 锌, 浸取, 反应, 溶液, 锰铁冶炼烟尘灰, 硫酸, 锰, 锌, 浸取

京ICP备12046843号-2;京公网安备 11010102001994号
Copyright © Chemical Industry and Engineering Progress, All Rights Reserved.
E-mail: hgjz@cip.com.cn
Powered by Beijing Magtech Co. Ltd