Chemical Industry and Engineering Progree

Previous Articles     Next Articles

Tungsten ionic liquids: Application of cyclohexanol oxidation

SUN Xiaoyun1,2,YUE Shuang3,LI Jing3,WANG Xue,FANG Dawei3,ZANG Shuliang3   

  1. 1East China Normal University,Shanghai 200062,China; 2Shenyang Aerospace University,Shenyang 110136,China; 3Institute of Rare and Scattered Elements Chemistry,Liaoning University,Shenyang 110036,China
  • Online:2013-03-05 Published:2013-03-05

钨离子液体催化氧化环己醇制得环己酮的性能

孙晓云1,2,岳 爽3,李 静3,王 雪3,房大维3,臧树良3   

  1. 1华东师范大学化学系,上海 200062;2沈阳航空航天大学理学院,辽宁 沈阳 100136;3辽宁大学稀散元素化学研究所,辽宁 沈阳 110036

Abstract: The ionic liquid [(CH3)N(n-C8H17)3]2W2O11 can be applied as a catalyst in cyclohexanol oxidation. Experiments show that it has good catalytic activity on cyclohexanol oxidation with H2O2 as the oxidant. It was conducted at 65 ℃ by adding substrate (5 mmol),catalyst (50 μmol) and H2O2 (15 mmol) in a stirred mixture in a reactor. The yield is more than 99 %. The catalyst could be recycled after simple filtering.

Key words: tungsten ionic liquid, cyclohexanol, oxidation

摘要: 该反应体系是以钨离子液体[(CH3)N(n-C8H17)3]2W2O11为催化剂,H2O2(30 %)为氧化剂,催化氧化环己醇制得环己酮。分别考察了催化剂用量、氧化剂用量以及温度变化对反应的影响。实验确定的反应最佳条件为反应温度65 ℃,环己醇用量5 mmol,催化剂用量50 μmol,H2O2用量15 mmol。在最佳条件下反应8 h,环己酮的产率可达99 %以上。反应过程无副产物,选择性好(> 99 %),体系异相催化,催化剂简单处理后可循环使用4次。

关键词: 钨离子液体, 环己醇, 氧化

京ICP备12046843号-2;京公网安备 11010102001994号
Copyright © Chemical Industry and Engineering Progress, All Rights Reserved.
E-mail: hgjz@cip.com.cn
Powered by Beijing Magtech Co. Ltd